Feasibility of Manual Teach-and-Replay and Continuous Impedance Shaping for Robotic Locomotor Training Following Spinal Cord Injury

Robotic gait training is an emerging technique for retraining walking ability following spinal cord injury (SCI). A key challenge in this training is determining an appropriate stepping trajectory and level of assistance for each patient, since patients have a wide range of sizes and impairment levels. Here, we demonstrate how a lightweight yet powerful robot can record subject-specific, trainer-induced leg trajectories during manually assisted stepping, then immediately replay those trajectories. Replay of the subject-specific trajectories reduced the effort required by the trainer during manual assistance, yet still generated similar patterns of muscle activation for six subjects with a chronic SCI. We also demonstrate how the impedance of the robot can be adjusted on a step-by-step basis with an error-based, learning law. This impedance-shaping algorithm adapted the robot's impedance so that the robot assisted only in the regions of the step trajectory where the subject consistently exhibited errors. The result was that the subjects stepped with greater variability, while still maintaining a physiologic gait pattern. These results are further steps toward tailoring robotic gait training to the needs of individual patients

Gait rehabilitation machines based on programmable footplates

BACKGROUND: Gait restoration is an integral part of rehabilitation of brain lesioned patients. Modern concepts favour a task-specific repetitive approach, i.e. who wants to regain walking has to walk, while tone-inhibiting and gait preparatory manoeuvres had dominated therapy before. Following the first mobilization out of the bed, the wheelchair-bound patient should have the possibility to practise complex gait cycles as soon as possible. Steps in this direction were treadmill training with partial body weight support and most recently gait machines enabling the repetitive training of even surface gait and even of stair climbing. RESULTS: With treadmill training harness-secured and partially relieved wheelchair-mobilised patients could practise up to 1000 steps per session for the first time. Controlled trials in stroke and SCI patients, however, failed to show a superior result when compared to walking exercise on the floor. Most likely explanation was the effort for the therapists, e.g. manually setting the paretic limbs during the swing phase resulting in a too little gait intensity. The next steps were gait machines, either consisting of a powered exoskeleton and a treadmill (Lokomat, AutoAmbulator) or an electromechanical solution with the harness secured patient placed on movable foot plates (Gait Trainer GT I). For the latter, a large multi-centre trial with 155 non-ambulatory stroke patients (DEGAS) revealed a superior gait ability and competence in basic activities of living in the experimental group. The HapticWalker continued the end effector concept of movable foot plates, now fully programmable and equipped with 6 DOF force sensors. This device for the first time enables training of arbitrary walking situations, hence not only the simulation of floor walking but also for example of stair climbing and perturbations. CONCLUSION: Locomotor therapy is a fascinating new tool in rehabilitation, which is in line with modern principles of motor relearning promoting a task-specific repetitive approach. Sophisticated technical developments and positive randomized controlled trials form the basis of a growing acceptance worldwide to the benefits or our patients

Effectiveness of Mechanical Horse-Riding Simulators on Postural Balance in Neurological Rehabilitation: Systematic Review and Meta-Analysis

Mechanical horse-riding simulators consist of a device that mimics the movement of a real horse, generating between 50 and 100 three-dimensional physical movements (forward and back, left and right, up and down). The main objective of this study is to analyze the effectiveness of mechanical horse-riding simulators to improve postural balance in subjects with neurological disorders. The search was conducted during January-March 2019 in PubMed, Physiotherapy Evidence Database (PEDro), Cochrane, Web of Science, CINAHL, and Scopus. The methodological quality of the studies was evaluated through the PEDro scale. A total of seven articles were included in this systematic review, of which four contributed information to the meta-analysis. Statistical analysis showed favorable results for balance in stroke patients, measured by the Berg Balance Scale (standardized mean difference (SMD) = 3.24; 95%; confidence interval (CI): 1.66-4.83). Not conclusive results were found in sitting postural balance, measured using the Gross Motor Function Measure-66 (GMFM-66) Sitting Dimension, in patients with cerebral palsy. Most studies have shown beneficial effects on postural balance compared with conventional physical therapy. However, due to the limited number of articles and their low methodological quality, no solid conclusions can be drawn about the effectiveness of this therapy

Hippotherapy: An Alternative Treatment from the Perceptions of Practitioners

Hippotherapy can be defined as a dynamic service offered by occupational, physical, and speech-language pathologists that utilizes a horse’s unique movement to achieve functional outcomes. While there are an abundance of studies demonstrating the effectiveness of hippotherapy, very few have examined the perceptions of the practitioners. The purposes of this thesis are to investigate hippotherapy’s effectiveness as well as to examine the beliefs and attitudes towards hippotherapy use among occupational therapists, physical therapists, and speech therapists. A literature review was conducted to examine the effectiveness of hippotherapy. The study included a total of 15 occupational, physical, and speech-language therapists who currently practice hippotherapy in the state of Massachusetts. These therapists were surveyed regarding their beliefs about the use of hippotherapy. In addition, 10 therapists who do not practice hippotherapy were interviewed regarding their perceptions of the practice. It was concluded that hippotherapy is a wide-reaching modality that serves many different populations. Both therapists that practice hippotherapy and those that do not are aware of the many benefits that hippotherapy offers. While there does seem to be growing awareness based on the data, there is a lack of understanding that hippotherapy is part of a treatment provided by occupational therapists, physical therapists, and speech-language pathologists who use it has a treatment tool to address the goals of their patients. The major issues with its lack of availability to patients is due to insurance, costs, and lack of practicing therapists. In order for this problem to be solved, future evidence-based research with more individuals with the same disability needs to be conducted to alter the perceptions of insurance companies. If hippotherapy were more widely accepted by insurance companies, perhaps in turn, more therapists would use or prescribe it as a treatment tool

Electromechanical and robotic devices for gait and balance rehabilitation of children with neurological disability: a systematic review

In the last two decades, a growing interest has been focused on gait and balance robot-assisted rehabilitation in children with neurological disabilities. Robotic devices allow the implementation of intensive, task-specific training fostering functional recovery and neuroplasticity phenomena. However, limited attention has been paid to the protocols used in this research framework. This systematic review aims to provide an overview of the existing literature on robotic systems for the rehabilitation of gait and balance in children with neurological disabilities and their rehabilitation applications. The literature search was carried out independently and synchronously by three authors on the following databases: MEDLINE, Cochrane Library, PeDro, Institute of Electrical and Electronics Engineers, ScienceDirect, and Google Scholar. The data collected included three subsections referring to clinical, technical, and regulatory aspects. Thirty-one articles out of 81 found on the primary literature search were included in the systematic review. Most studies involved children with cerebral palsy. Only one-third of the studies were randomized controlled trials. Overall, 17 devices (nine end-effector systems and eight exoskeletons) were investigated, among which only 4 (24%) were bore the CE mark. Studies differ on rehabilitation protocols duration, intensity, and outcome measures. Future research should improve both rehabilitation protocols\u2019 and devices\u2019 descriptions

Robotic Rehabilitation Devices of Human Extremities: Design Concepts and Functional Particularities

International audienceAll over the world, several dozen million people suffer from the effects of post-polio, multiple sclerosis, spinal cord injury, cerebral palsy, etc. and could benefit from the advances in robotic devices for rehabilitation. Thus, for modern society, an important and vital problem of designing systems for rehabilitation of human physical working ability appears. The temporary or permanent loss of human motor functions can be compensated by means of various rehabilitation devices. They can be simple mechanical systems for orthoses, which duplicate the functions of human extremities supplying with rigidity and bearing capacity or more complex mechatronic rehabilitation devices with higher level of control. We attempt to cover all of the major developments in these areas, focusing particularly on the development of the different concepts and their functional characteristics. The robotic devices with several structures are classified, taking into account the actuation systems, the neuromuscular stimulations, and the structural schemes. It is showed that the problems concerning the design of rehabilitation devices are complex and involve many questions in the sphere of biomedicine, mechanics, robot technology, electromechanics and optimal control. This paper provides a design overview of hardware, actuation, sensory, and control systems for most of the devices that have been described in the literature, and it ends with a discussion of the major advances that have been made and should be yet overcome

Nebraska Biomechanics Core Facilty 2009 Annual Report, Issue 8

April 2009 - March 2010 This issue features Announcements, Featured News, Projects, Collaborations, Visitors, Awards, Publications, and Support.https://digitalcommons.unomaha.edu/nbcfnewsletter/1007/thumbnail.jp

Mechatronic Systems

Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools

Nebraska Biomechanics Core Facilty 2008 Annual Report, Issue 7

April 2008 - March 2009 This issue features Announcements, Featured News, Nonlinear Workshop, Projects, Collaborations, Visitors, Awards, Publications, and Support.https://digitalcommons.unomaha.edu/nbcfnewsletter/1006/thumbnail.jp