262 research outputs found
Mengenal pasti tahap pengetahuan pelajar tahun akhir Ijazah Sarjana Muda Kejuruteraan di KUiTTHO dalam bidang keusahawanan dari aspek pengurusan modal
Malaysia ialah sebuah negara membangun di dunia. Dalam proses pembangunan
ini, hasrat negara untuk melahirkan bakal usahawan beijaya tidak boleh dipandang
ringan. Oleh itu, pengetahuan dalam bidang keusahawanan perlu diberi perhatian
dengan sewajarnya; antara aspek utama dalam keusahawanan ialah modal. Pengurusan
modal yang tidak cekap menjadi punca utama kegagalan usahawan. Menyedari hakikat
ini, kajian berkaitan Pengurusan Modal dijalankan ke atas 100 orang pelajar Tahun
Akhir Kejuruteraan di KUiTTHO. Sampel ini dipilih kerana pelajar-pelajar ini akan
menempuhi alam pekeijaan di mana mereka boleh memilih keusahawanan sebagai satu
keijaya. Walau pun mereka bukanlah pelajar dari jurusan perniagaan, namun mereka
mempunyai kemahiran dalam mereka cipta produk yang boleh dikomersialkan. Hasil
dapatan kajian membuktikan bahawa pelajar-pelajar ini berminat dalam bidang
keusahawanan namun masih kurang pengetahuan tentang pengurusan modal
terutamanya dalam menentukan modal permulaan, pengurusan modal keija dan caracara
menentukan pembiayaan kewangan menggunakan kaedah jualan harian. Oleh itu,
satu garis panduan Pengurusan Modal dibina untuk memberi pendedahan kepada
mereka
NASA Space Engineering Research Center for VLSI systems design
This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design
Efficient reconfigurable architectures for 3D medical image compression
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities,
such as magnetic resonance imaging (MRI), computed tomography (CT), positron
emission tomography (PET), and ultrasound (US) have generated a massive amount
of volumetric data. These have provided an impetus to the development of other
applications, in particular telemedicine and teleradiology. In these fields, medical
image compression is important since both efficient storage and transmission of data
through high-bandwidth digital communication lines are of crucial importance.
Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow
for quick upgradeability with real-time applications. Moreover, in order to obtain
efficient solutions for large medical volumes data, an efficient implementation of
these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system
building block in the construction of high-performance systems at an economical price.
Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent
advantages such as massive parallelism capabilities, multimillion gate counts, and
special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are
optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits
promising results in reducing Gaussian white noise in medical images. In terms of
hardware implementation, promising trade-offs on maximum frequency, throughput
and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC)
has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete
wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that
3-D IT demonstrates better computational complexity than the 3-D DWT, whilst
the 3-D DWT with LS exhibits a lossless compression that is significantly useful for
medical image compression. Additionally, an architecture of CAVLC that is capable
of compressing high-definition (HD) images in real-time without any buffer between
the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the
slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE),
Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci
Recommended from our members
Efficient architectures and power modelling of multiresolution analysis algorithms on FPGA
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In the past two decades, there has been huge amount of interest in Multiresolution Analysis Algorithms (MAAs) and their applications. Processing some of their applications such as medical imaging are computationally intensive, power hungry and requires large amount of memory which cause a high demand for efficient algorithm implementation, low power architecture and acceleration. Recently, some MAAs such as Finite Ridgelet Transform (FRIT) Haar Wavelet Transform (HWT) are became very popular and they are suitable for a number of image processing applications such as detection of line singularities and contiguous edges, edge detection (useful for compression and feature detection), medical image denoising and segmentation. Efficient hardware implementation and acceleration of these algorithms particularly when addressing large problems are becoming very chal-lenging and consume lot of power which leads to a number of issues including mobility, reliability concerns. To overcome the computation problems, Field Programmable Gate Arrays (FPGAs) are the technology of choice for accelerating computationally intensive applications due to their high performance. Addressing the power issue requires optimi- sation and awareness at all level of abstractions in the design flow.
The most important achievements of the work presented in this thesis are summarised
here.
Two factorisation methodologies for HWT which are called HWT Factorisation Method1 and (HWTFM1) and HWT Factorasation Method2 (HWTFM2) have been explored to increase number of zeros and reduce hardware resources. In addition, two novel efficient and optimised architectures for proposed methodologies based on Distributed Arithmetic (DA) principles have been proposed. The evaluation of the architectural results have shown that the proposed architectures results have reduced the arithmetics calculation (additions/subtractions) by 33% and 25% respectively compared to direct implementa-tion of HWT and outperformed existing results in place. The proposed HWTFM2 is implemented on advanced and low power FPGA devices using Handel-C language. The FPGAs implementation results have outperformed other existing results in terms of area and maximum frequency. In addition, a novel efficient architecture for Finite Radon Trans-form (FRAT) has also been proposed. The proposed architecture is integrated with the developed HWT architecture to build an optimised architecture for FRIT. Strategies such as parallelism and pipelining have been deployed at the architectural level for efficient im-plementation on different FPGA devices. The proposed FRIT architecture performance has been evaluated and the results outperformed some other existing architecture in place. Both FRAT and FRIT architectures have been implemented on FPGAs using Handel-C language. The evaluation of both architectures have shown that the obtained results out-performed existing results in place by almost 10% in terms of frequency and area. The proposed architectures are also applied on image data (256 Ā£ 256) and their Peak Signal to Noise Ratio (PSNR) is evaluated for quality purposes.
Two architectures for cyclic convolution based on systolic array using parallelism and pipelining which can be used as the main building block for the proposed FRIT architec-ture have been proposed. The first proposed architecture is a linear systolic array with pipelining process and the second architecture is a systolic array with parallel process. The second architecture reduces the number of registers by 42% compare to first architec-ture and both architectures outperformed other existing results in place. The proposed pipelined architecture has been implemented on different FPGA devices with vector size (N) 4,8,16,32 and word-length (W=8). The implementation results have shown a signifi-cant improvement and outperformed other existing results in place.
Ultimately, an in-depth evaluation of a high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called func-tional level power modelling approach have been presented. The mathematical techniques that form the basis of the proposed power modeling has been validated by a range of custom IP cores. The proposed power modelling is scalable, platform independent and compares favorably with existing approaches. A hybrid, top-down design flow paradigm integrating functional level power modelling with commercially available design tools for systematic optimisation of IP cores has also been developed. The in-depth evaluation of this tool enables us to observe the behavior of different custom IP cores in terms of power consumption and accuracy using different design methodologies and arithmetic techniques on virous FPGA platforms. Based on the results achieved, the proposed model accuracy is almost 99% true for all IP core's Dynamic Power (DP) components.Thomas Gerald Gray Charitable Trus
Application of constrained optimisation techniques in electrical impedance tomography
A Constrained Optimisation technique is described for the reconstruction of temporal resistivity images. The approach solves the Inverse problem by optimising a cost function under constraints, in the form of normalised boundary potentials.
Mathematical models have been developed for two different data collection methods for the chosen criterion. Both of these models express the reconstructed image in terms of one dimensional (I-D) Lagrange multiplier functions. The reconstruction problem becomes one of estimating these 1-D functions from the
normalised boundary potentials. These models are based on a cost criterion of the minimisation of the variance between the reconstructed resistivity distribution and the true resistivity distribution.
The methods presented In this research extend the algorithms previously developed for X-ray systems. Computational efficiency is enhanced by exploiting the structure of the associated system matrices. The structure of the system matrices was preserved in the Electrical Impedance Tomography (EIT) implementations by applying a weighting due to non-linear current distribution during the backprojection of the Lagrange multiplier functions.
In order to obtain the best possible reconstruction it is important to consider the effects of noise in the boundary data. This is achieved by using a fast algorithm which matches the statistics of the error in the approximate inverse of the associated system matrix with the statistics of the noise error in the boundary data. This yields the optimum solution with the available boundary data. Novel approaches have been developed to produce the Lagrange multiplier functions.
Two alternative methods are given for the design of VLSI implementations of hardware accelerators to improve computational efficiencies. These accelerators are designed to implement parallel geometries and are modelled using a verification
description language to assess their performance capabilities
- ā¦