CIB: An Improved Communication Architecture for Real-Time Monitoring of Aerospace Materials, Instruments, and Sensors on the ISS

The Communications Interface Board (CIB) is an improved communications architecture that was demonstrated on the International Space Station (ISS). ISS communication interfaces allowing for real-time telemetry and health monitoring require a significant amount of development. The CIB simplifies the communications interface to the ISS for real-time health monitoring, telemetry, and control of resident sensors or experiments. With a simpler interface available to the telemetry bus, more sensors or experiments may be flown. The CIB accomplishes this by acting as a bridge between the ISS MIL-STD-1553 low-rate telemetry (LRT) bus and the sensors allowing for two-way command and telemetry data transfer. The CIB was designed to be highly reliable and radiation hard for an extended flight in low Earth orbit (LEO) and has been proven with over 40 months of flight operation on the outside of ISS supporting two sets of flight experiments. Since the CIB is currently operating in flight on the ISS, recent results of operations will be provided. Additionally, as a vehicle health monitoring enabling technology, an overview and results from two experiments enabled by the CIB will be provided. Future applications for vehicle health monitoring utilizing the CIB architecture will also be discussed

Verification and integration of the management and control software for the Near Infrared Spectrometer Photometer of the Euclid space mission

The thesis comprises five chapters covering different items and phases of the work accomplished during my Ph.D program. Such work is part of the Euclid Project, a very high-profile space-based scientific mission designed to accurately measure the expansion history of the universe and the growth of cosmic structures. The first chapter is an introduction to the Euclid space mission and a description of Euclid’s scientific goals and instrumentation. The payload is a telescope that hosts two instruments capable of taking images at different wavelengths. In particular, the chapter provides a detailed description of the Near Infrared Spectrometer Photometer (NISP). The second chapter presents a detailed description of the NISP Warm Electronics (WE) with particular emphasis on the Data Processing Unit (DPU), the Instrument Control Unit (ICU), their application software (ASW), and the communication among them. The Assembly, Integration, Validation, and Testing (AIV/AIT) of such boards and the corresponding software are the main subjects of my Ph.D. study. Chapters 3, 4, and 5 which take into consideration the AIV activities and the specifically designed software tools, detail my contribution to the NISP WE AIV. The AIV of the NISP on-board software required a careful design and the development of software tools to verify functionality and performances. Great care was taken in the development of the software of the DPU test equipment controlling the interface with the DPU. I developed it in close cooperation with the NISP AIV/AIT team, the NISP-Electrical Ground Support Equipment (EGSE) team, and two industries (OHB Italia for the DPU hardware design and construction and Temis for the procurement of the DPU TE). The developed software was delivered to the industries and is now used for the validation of the DPU Electro Qualified Model (EQM) and the Flight Model (FM). Chapter 4 describes the DPU test campaign. I took part in the integration of the Application Software in the DPU board at OHB Italy and at INAF Padua. Chapter 5 illustrates the AIV/AIT activity for the validation of the NISP Avionic Model (AVM) before delivery to Thales Alenia Space Italia (TAS-I)

Preliminary Electrical Designs for CTEx and AFIT Satellite Ground Station

This thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology. The electrical design of the system is challenging due to the large amount of data that is acquired by the imager and the limited resources that is inherent with space-based systems. Additional complication to the design is the need to know the angle of a spinning prism that is in the field of view very precisely for each image. Without this precise measurement any scene that is reconstructed from the data will be blurry and incomprehensible. This thesis also outlines how the control software for the CTEx space system should be created. The software ow is a balance of complex real time target pointing angles and simplicity to allow the system to function as quick as possible. This thesis also discusses the preliminary design for an AFIT satellite ground station based upon the design of the United States Air Force Academy\u27s ground station. The AFIT ground station will be capable of commanding and controlling satellites produced by USAFA and satellites produced by a burgeoning small satellite program at AFIT

Flexible management of bandwidth and redundancy in fieldbuses

Doutoramento em Engenharia ElectrotécnicaOs sistemas distribuídos embarcados (Distributed Embedded Systems – DES) têm sido usados ao longo dos últimos anos em muitos domínios de aplicação, da robótica, ao controlo de processos industriais passando pela aviónica e pelas aplicações veiculares, esperando-se que esta tendência continue nos próximos anos. A confiança no funcionamento é uma propriedade importante nestes domínios de aplicação, visto que os serviços têm de ser executados em tempo útil e de forma previsível, caso contrário, podem ocorrer danos económicos ou a vida de seres humanos poderá ser posta em causa. Na fase de projecto destes sistemas é impossível prever todos os cenários de falhas devido ao não determinismo do ambiente envolvente, sendo necessária a inclusão de mecanismos de tolerância a falhas. Adicionalmente, algumas destas aplicações requerem muita largura de banda, que também poderá ser usada para a evolução dos sistemas, adicionandolhes novas funcionalidades. A flexibilidade de um sistema é uma propriedade importante, pois permite a sua adaptação às condições e requisitos envolventes, contribuindo também para a simplicidade de manutenção e reparação. Adicionalmente, nos sistemas embarcados, a flexibilidade também é importante por potenciar uma melhor utilização dos, muitas vezes escassos, recursos existentes. Uma forma evidente de aumentar a largura de banda e a tolerância a falhas dos sistemas embarcados distribuídos é a replicação dos barramentos do sistema. Algumas soluções existentes, quer comerciais quer académicas, propõem a replicação dos barramentos para aumento da largura de banda ou para aumento da tolerância a falhas. No entanto e quase invariavelmente, o propósito é apenas um, sendo raras as soluções que disponibilizam uma maior largura de banda e um aumento da tolerância a falhas. Um destes raros exemplos é o FlexRay, com a limitação de apenas ser permitido o uso de dois barramentos. Esta tese apresentada e discute uma proposta para usar a replicação de barramentos de uma forma flexível com o objectivo duplo de aumentar a largura de banda e a tolerância a falhas. A flexibilidade dos protocolos propostos também permite a gestão dinâmica da topologia da rede, sendo o número de barramentos apenas limitado pelo hardware/software. As propostas desta tese foram validadas recorrendo ao barramento de campo CAN – Controller Area Network, escolhido devido à sua grande implantação no mercado. Mais especificamente, as soluções propostas foram implementadas e validadas usando um paradigma que combina flexibilidade com comunicações event-triggered e time-triggered: o FTT – Flexible Time- Triggered. No entanto, uma generalização para CAN nativo é também apresentada e discutida. A inclusão de mecanismos de replicação do barramento impõe a alteração dos antigos protocolos de replicação e substituição do nó mestre, bem como a definição de novos protocolos para esta finalidade. Este trabalho tira partido da arquitectura centralizada e da replicação do nó mestre para suportar de forma eficiente e flexível a replicação de barramentos. Em caso de ocorrência de uma falta num barramento (ou barramentos) que poderia provocar uma falha no sistema, os protocolos e componentes propostos nesta tese fazem com que o sistema reaja, mudando para um modo de funcionamento degradado. As mensagens que estavam a ser transmitidas nos barramentos onde ocorreu a falta são reencaminhadas para os outros barramentos. A replicação do nó mestre baseia-se numa estratégia líder-seguidores (leaderfollowers), onde o líder (leader) controla todo o sistema enquanto os seguidores (followers) servem como nós de reserva. Se um erro ocorrer no nó líder, um dos nós seguidores passará a controlar o sistema de uma forma transparente e mantendo as mesmas funcionalidades. As propostas desta tese foram também generalizadas para CAN nativo, tendo sido para tal propostos dois componentes adicionais. É, desta forma possível ter as mesmas capacidades de tolerância a falhas ao nível dos barramentos juntamente com a gestão dinâmica da topologia de rede. Todas as propostas desta tese foram implementadas e avaliadas. Uma implementação inicial, apenas com um barramento foi avaliada recorrendo a uma aplicação real, uma equipa de futebol robótico onde o protocolo FTT-CAN foi usado no controlo de movimento e da odometria. A avaliação do sistema com múltiplos barramentos foi feita numa plataforma de teste em laboratório. Para tal foi desenvolvido um sistema de injecção de faltas que permite impor faltas nos barramentos e nos nós mestre, e um sistema de medida de atrasos destinado a medir o tempo de resposta após a ocorrência de uma falta.Distributed embedded systems (DES) have been widely used in the last few decades in several application domains, from robotics, industrial process control, avionics and automotive. In fact, it is expectable that this trend will continue in the next years. In some of these application fields the dependability requirements are very important since the fail to provide services in a timely and predictable manner may cause important economic losses or even put humans in risk. In the design phase it is impossible to predict all the possible scenarios of faults, due to the non deterministic behaviour of the surrounding environment. In that way, the fault tolerance mechanisms must be included in the distributed embedded system to prevent failures occurrence. Also, many application domains require a high available bandwidth to perform the desired functions, or to turn possible the scaling with the addition of new features. The flexibility of a system also plays an important role, since it improves the capability to adapt to the surrounding world, and to the simplicity of the repair and maintenance. The flexibility improves the efficiency of all the system by providing a way to efficiently manage the available resources. This is very important in embedded systems due to the limited resources often available. A natural way to improve the bandwidth and the fault tolerance in distributed systems is to use replicated buses. Commercial and academic solutions propose the use of replicated fieldbuses for a single purpose only, either to improve the fault tolerance or to improve the available bandwidth, being the first the most common. One illustrative exception is FlexRay where the bus replica can be used to improve the bandwidth of the overall system, besides enabling redundant communications. However, only one bus replica can be used. In this thesis, a flexible bus replication scheme to improve both the dependability and the throughput of fieldbuses is presented and studied. It can be applied to any number of replicated buses, provided the required hardware support is available. The flexible use of the replicated buses can achieve an also flexible management of the network topology. This claim has been validated using the Controller Area Network (CAN) fieldbus, which has been chosen because it is widely spread in millions of systems. In fact, the proposed solution uses a paradigm that combines flexibility, time and event triggered communication, that is the Flexible Time- Triggered over CAN network (FTT-CAN). However, a generalization to native CAN is also presented and studied. The inclusion of bus replication in FTT-CAN imposes not only new mechanisms but also changes of the mechanisms associated with the master replication, which has been already studied in previous research work. In this work, these mechanisms were combined and take advantage of the centralized architecture and of the redundant masters to support an efficient and flexible bus replication. When considering the system operation, if a fault in the bus (or buses) occurs, and the consequent error leads to a system failure, the system reacts, switching to a degraded mode, where the message flows that were transmitted in the faulty bus (or buses) change to the non-faulty ones. The central node replication uses a leader-follower strategy, where the leader controls the system while the followers serve as backups. If an error occurs in the leader, a backup will take the system control maintaining the system with the same functionalities. The system has been generalized for native CAN, using two additional components that provide the same fault tolerance capabilities at the bus level, and also enable the dynamic management of the network topology. All the referred proposals were implemented and assessed in the scope of this work. The single bus version of FTT-CAN was assessed using a real application, a robotic soccer team, which has obtained excellent results in international competitions. There, the FTT-CAN based embedded system has been applied in the low level control, where, mainly it is responsible for the motion control and odometry. For the case of the multiple buses system, the assessment was performed in a laboratory test bed. For this, a fault injector was developed in order to impose faults in the buses and in the central nodes. To measure the time reaction of the system, a special hardware has been developed: a delay measurement system. It is able to measure delays between two important time marks for posterior offline analysis of the obtained values

NASA Tech Briefs, May 1996

Topics include: Video and Imaging;Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Report