Controlled Ecological Life Support Systems (CELSS) conceptual design option study

Results are given of a study to explore options for the development of a Controlled Ecological Life Support System (CELSS) for a future Space Station. In addition, study results will benefit the design of other facilities such as the Life Sciences Research Facility, a ground-based CELSS demonstrator, and will be useful in planning longer range missions such as a lunar base or manned Mars mission. The objectives were to develop weight and cost estimates for one CELSS module selected from a set of preliminary plant growth unit (PGU) design options. Eleven Space Station CELSS module conceptual PGU designs were reviewed, components and subsystems identified and a sensitivity analysis performed. Areas where insufficient data is available were identified and divided into the categories of biological research, engineering research, and technology development. Topics which receive significant attention are lighting systems for the PGU, the use of automation within the CELSS system, and electric power requirements. Other areas examined include plant harvesting and processing, crop mix analysis, air circulation and atmosphere contaminant flow subsystems, thermal control considerations, utility routing including accessibility and maintenance, and nutrient subsystem design

Optimization of CO2 production rate for firefighting robot applications using response surface methodology

A carbon dioxide gas-powered pneumatic actuation has been proposed as a suitable power source for an autonomous firefighting robot (CAFFR), which is designed to operate in an indoor fire environment in our earlier study. Considering the consumption rate of the pneumatic motor, the gas-powered actuation that is based on the theory of phase change material requires optimal determination of not only the sublimation rate of carbon dioxide but also the sizing of dry ice granules. Previous studies that have used the same theory are limited to generating a high volume of carbon dioxide without reference to neither the production rate of the gas nor the size of the granules of the dry ice. However, such consideration remains a design requirement for efficient driving of a carbon dioxide-powered firefighting robot. This paper investigates the effects of influencing design parameters on the sublimation rate of dry ice for powering a pneumatic motor. The optimal settings of these parameters that maximize the sublimation rate at the minimal time and dry ice mass are presented. In the experimental design and analysis, we employed full-factorial design and response surface methodology to fit an acceptable model for the relationship between the design factors and the response variables. Predictive models of the sublimation rate were examined via ANOVA, and the suitability of the linear model is confirmed. Further, an optimal sublimation rate value of 0.1025 g/s is obtained at a temperature of 80°C, the mass of 16.1683 g, and sublimation time of 159.375 s

Design of a Glass Wall Cleaning Mechanism

Cutting down the maintenance cost, reduce the cleaning time and eliminates air pollution are the 3 main objectives set in this project entitle “To Design a glass wall cleaning mechanism”. The challenge here is to design a cleaning mechanism that will clean the outer wall of the glass panel of the Universiti Teknologi PETRONAS academic block while fulfilling the 3 objectives. Thus, a series of criteria were set, and justified, conceptual model to represent the criteria is designed and given verdict before the real product is being design in details. The final product of this project is a detail design of a cleaning mechanism that is supported by a supporting system which will be move across the rooftop of the academic building

Ground Robotic Hand Applications for the Space Program study (GRASP)

This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time

Development of Inspection Robots for Bridge Cables

This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented

Development of an automated robot vision component handling system

Thesis (M. Tech. (Engineering: Electrical)) -- Central University of technology, Free State, 2013In the industry, automation is used to optimize production, improve product quality and increase profitability. By properly implementing automation systems, the risk of injury to workers can be minimized. Robots are used in many low-level tasks to perform repetitive, undesirable or dangerous work. Robots can perform a task with higher precision and accuracy to lower errors and waste of material. Machine Vision makes use of cameras, lighting and software to do visual inspections that a human would normally do. Machine Vision is useful in application where repeatability, high speed and accuracy are important. This study concentrates on the development of a dedicated robot vision system to automatically place components exiting from a conveyor system onto Automatic Guided Vehicles (AGV). A personal computer (PC) controls the automated system. Software modules were developed to do image processing for the Machine Vision system as well as software to control a Cartesian robot. These modules were integrated to work in a real-time system. The vision system is used to determine the parts‟ position and orientation. The orientation data are used to rotate a gripper and the position data are used by the Cartesian robot to position the gripper over the part. Hardware for the control of the gripper, pneumatics and safety systems were developed. The automated system‟s hardware was integrated by the use of the different communication protocols, namely DeviceNet (Cartesian robot), RS-232 (gripper) and Firewire (camera)

EVALUATION OF ROBOTIC CLEANING TECHNOLOGIES: PRESERVING A BRITISH ICONIC BUILDING

The engineering building of the University Leicester built-in 1963 has been a British icon for decades now. Applications of Robotic technologies are uprising nowadays, which provides a contingency to manipulate the benefits of robotics for executing challenging and precarious facade cleaning processes. This paper surveys the facade cleaning robotic technologies exist in the market. It exhibits the comparative analysis of four notorious robotic facade cleaning solutions namely Sky Pro, Gekko, BFMR (Building Façade Maintenance Robot) and Sirius_c. The comparison is executed using Multi Criteria Decision Analysis (MCDA) and Quality Function Deployment (QFD) techniques. This study analyses the performance of the robots based on the critical parameters such as water consumption, cleaning efficiency, cleaning dimensions and ease of implementation. Although none of these robotic solutions are implemented off the shelf, some adaptation on these solutions is necessary for the development of robotic techniques work successfully in real time. This paper proposes a hybrid robotic solution combining the vacuum pump adhesion and wheeled locomotion for the effective cleaning of the complex external building structure based on the MCDA and QFD analysis. It highlights the significant future research directions in this field

Lower body design of the ‘iCub’ a human-baby like crawling robot

The development of robotic cognition and a greater understanding of human cognition form two of the current greatest challenges of science. Within the RobotCub project the goal is the development of an embodied robotic child (iCub) with the physical and ultimately cognitive abilities of a 2frac12 year old human baby. The ultimate goal of this project is to provide the cognition research community with an open human like platform for understanding of cognitive systems through the study of cognitive development. In this paper the design of the mechanisms adopted for lower body and particularly for the leg and the waist are outlined. This is accompanied by discussion on the actuator group realisation in order to meet the torque requirements while achieving the dimensional and weight specifications. Estimated performance measures of the iCub are presented