Fast, non-monte-carlo estimation of transient performance variation due to device mismatch

This paper describes an efficient way of simulating the effects of device random mismatch on circuit transient characteristics, such as variations in delay or in frequency. The proposed method models DC random offsets as equivalent AC pseudo-noises and leverages the fast, linear periodically time-varying (LPTV) noise analysis available from RF circuit simulators. Therefore, the method can be considered as an extension to DC match analysis and offers a large speed-up compared to the traditional Monte-Carlo analysis. Although the assumed linear perturbation model is valid only for small variations, it enables easy ways to estimate correlations among variations and identify the most sensitive design parameters to mismatch, all at no additional simulation cost. Three benchmarks measuring the variations in the input offset voltage of a clocked comparator, the delay of a logic path, and the frequency of an oscillator demonstrate the speed improvement of about 100-1000x compared to a 1000-point Monte-Carlo method

The Rolf of Test Chips in Coordinating Logic and Circuit Design and Layout Aids for VLSI

This paper emphasizes the need for multipurpose test chips and comprehensive procedures for use in supplying accurate input data to both logic and circuit simulators and chip layout aids. It is shown that the location of test structures within test chips is critical in obtaining representative data, because geometrical distortions introduced during the photomasking process can lead to significant intrachip parameter variations. In order to transfer test chip designs quickly, accurately, and economically, a commonly accepted portable chip layout notation and commonly accepted parametric tester language are needed. In order to measure test chips more accurately and more rapidly, parametric testers with improved architecture need to be developed in conjunction with innovative test structures with on-chip signal conditioning

Mixed-signal CNN array chips for image processing

Due to their local connectivity and wide functional capabilities, cellular nonlinear networks (CNN) are excellent candidates for the implementation of image processing algorithms using VLSI analog parallel arrays. However, the design of general purpose, programmable CNN chips with dimensions required for practical applications raises many challenging problems to analog designers. This is basically due to the fact that large silicon area means large development cost, large spatial deviations of design parameters and low production yield. CNN designers must face different issues to keep reasonable enough accuracy level and production yield together with reasonably low development cost in their design of large CNN chips. This paper outlines some of these major issues and their solutions

CMOS design of chaotic oscillators using state variables: a monolithic Chua's circuit

This paper presents design considerations for monolithic implementation of piecewise-linear (PWL) dynamic systems in CMOS technology. Starting from a review of available CMOS circuit primitives and their respective merits and drawbacks, the paper proposes a synthesis approach for PWL dynamic systems, based on state-variable methods, and identifies the associated analog operators. The GmC approach, combining quasi-linear VCCS's, PWL VCCS's, and capacitors is then explored regarding the implementation of these operators. CMOS basic building blocks for the realization of the quasi-linear VCCS's and PWL VCCS's are presented and applied to design a Chua's circuit IC. The influence of GmC parasitics on the performance of dynamic PWL systems is illustrated through this example. Measured chaotic attractors from a Chua's circuit prototype are given. The prototype has been fabricated in a 2.4- mu m double-poly n-well CMOS technology, and occupies 0.35 mm/sup 2/, with a power consumption of 1.6 mW for a +or-2.5-V symmetric supply. Measurements show bifurcation toward a double-scroll Chua's attractor by changing a bias current

Subthreshold Dual Mode Logic

In this brief, we introduce a novel low-power dual mode logic (DML) family, designed to operate in the subthreshold region. The proposed logic family can be switched between static and dynamic modes of operation according to system requirements. In static mode, the DML gates feature very low-power dissipation with moderate performance, while in dynamic mode they achieve higher performance, albeit with increased power dissipation. This is achieved with a simple and intuitive design concept. SPICE and Monte Carlo simulations compare performance, power dissipation, and robustness of the proposed DML gates to their CMOS and domino counterparts in the 80-nm process. Measurements of an 80-nm test chip are presented in order to prove the proposed concept

Design and Robustness Analysis on Non-volatile Storage and Logic Circuit

By combining the flexibility of MOS logic and the non-volatility of spintronic devices, spin-MOS logic and storage circuitry offer a promising approach to implement highly integrated, power-efficient, and nonvolatile computing and storage systems. Besides the persistent errors due to process variations, however, the functional correctness of Spin-MOS circuitry suffers from additional non-persistent errors that are incurred by the randomness of spintronic device operations, i.e., thermal fluctuations. This work quantitatively investigates the impact of thermal fluctuations on the operations of two typical Spin-MOS circuitry: one transistor and one magnetic tunnel junction (1T1J) spin-transfer torque random access memory (STT-RAM) cell and a nonvolatile latch design. A new nonvolatile latch design is proposed based on magnetic tunneling junction (MTJ) devices. In the standby mode, the latched data can be retained in the MTJs without consuming any power. Two types of operation errors can occur, namely, persistent and non-persistent errors. These are quantitatively analyzed by including models for process variations and thermal fluctuations during the read and write operations. A mixture importance sampling methodology is applied to enable yield-driven design and extend its application beyond memories to peripheral circuits and logic blocks. Several possible design techniques to reduce thermal induced non-persistent error rate are also discussed

A Statistical STT-RAM Design View and Robust Designs at Scaled Technologies

Rapidly increased demands for memory in electronic industry and the significant technical scaling challenges of all conventional memory technologies motivated the researches on the next generation memory technology. As one promising candidate, spin-transfer torque random access memory (STT-RAM) features fast access time, high density, non-volatility, and good CMOS process compatibility. In recent years, many researches have been conducted to improve the storage density and enhance the scalability of STT-RAM, such as reducing the write current and switching time of magnetic tunneling junction (MTJ) devices. In parallel with these efforts, the continuous increasing of tunnel magneto-resistance(TMR) ratio of the MTJ inspires the development of multi-level cell (MLC) STT-RAM, which allows multiple data bits be stored in a single memory cell. Two types of MLC STT-RAM cells, namely, parallel MLC and series MLC, were also proposed. However, like all other nanoscale devices, the performance and reliability of STT-RAM cells are severely affected by process variations, intrinsic device operating uncertainties and environmental fluctuations. The storage margin of a MLC STT-RAM cell, i.e., the distinction between the lowest and highest resistance states, is partitioned into multiple segments for multi-level data representation. As a result, the performance and reliability of MLC STT-RAM cells become more sensitive to the MOS and MTJ device variations and the thermal-induced randomness of MTJ switching. In this work, we systematically analyze the impacts of CMOS and MTJ process variations, MTJ resistance switching randomness that induced by intrinsic thermal fluctuations, and working temperature changes on STT-RAM cell designs. The STT-RAM cell reliability issues in both read and write operations are first investigated. A combined circuit and magnetic simulation platform is then established to quantitatively study the persistent and non-persistent errors in STT-RAM cell operations. Then, we analyzed the extension of STT-RAM cell behaviors from SLC (single-level- cell) to MLC (multi-level- cell). On top of that, we also discuss the optimal device parameters of the MLC MTJ for the minimization of the operation error rate of the MLC STT-RAM cells from statistical design perspective. Our simulation results show that under the current available technology, series MLC STT-RAM demonstrates overwhelming benefits in the read and write reliability compared to parallel MLC STT-RAM and could potentially satisfy the requirement of commercial practices. Finally, with the detail analysis study of STT-RAM cells, we proposed several error reduction design, such as ADAMS structure, and FA-STT structure

Analysis and equalization of data-dependent jitter

Data-dependent jitter limits the bit-error rate (BER) performance of broadband communication systems and aggravates synchronization in phase- and delay-locked loops used for data recovery. A method for calculating the data-dependent jitter in broadband systems from the pulse response is discussed. The impact of jitter on conventional clock and data recovery circuits is studied in the time and frequency domain. The deterministic nature of data-dependent jitter suggests equalization techniques suitable for high-speed circuits. Two equalizer circuit implementations are presented. The first is a SiGe clock and data recovery circuit modified to incorporate a deterministic jitter equalizer. This circuit demonstrates the reduction of jitter in the recovered clock. The second circuit is a MOS implementation of a jitter equalizer with independent control of the rising and falling edge timing. This equalizer demonstrates improvement of the timing margins that achieve 10/sup -12/ BER from 30 to 52 ps at 10 Gb/s

An Offset Cancelation Technique for Latch Type Sense Amplifiers

An offset compensation technique for a latch type sense amplifier is proposed in this paper. The proposed scheme is based on the recalibration of the charging/discharging current of the critical nodes which are affected by the device mismatches. The circuit has been designed in a 65 nm CMOS technology with 1.2 V core transistors. The auto-calibration procedure is fully digital. Simulation results are given verifying the operation for sampling a 5 Gb/s signal dissipating only 360 uW