Design Of Digital Imaging System Using Digital Signal Processor (DSP)

The objective of this project is to present the design and analysis of a camera module system which this system will be able to capture still images from camera, process these digital images and then display through the computer screen. The digital imaging microcontroller system using digital signal processor (DSP) has been designed and developed. This microcontroller can be distributed into four parts. The main part was contributed by the DSP chipset which act as a centre processing unit (CPU) to control all the processing of images data flow. The second part will be the voltage regulator part to step down the 5V to 3.3V and 1.8V for DSP source power purposes and also to step down to 2.8V for the camera source power purposes. The third part make up of all the logic devices as to store and process the images data. The final part will be treated as transmit and receive control system for the serial communication in between microcontroller system and computer. In addition, this project also analyzes the application of digital image processing using digital signal processor starter kit (DSK). Implementation of the design and analysis of this project will be reported in details. Finally, further analysis and the real time data to image conversion form cannot be executed but the results regarding the processing of the digital image data during the analysis will be discussed in this project

MATLAB

A well-known statement says that the PID controller is the "bread and butter" of the control engineer. This is indeed true, from a scientific standpoint. However, nowadays, in the era of computer science, when the paper and pencil have been replaced by the keyboard and the display of computers, one may equally say that MATLAB is the "bread" in the above statement. MATLAB has became a de facto tool for the modern system engineer. This book is written for both engineering students, as well as for practicing engineers. The wide range of applications in which MATLAB is the working framework, shows that it is a powerful, comprehensive and easy-to-use environment for performing technical computations. The book includes various excellent applications in which MATLAB is employed: from pure algebraic computations to data acquisition in real-life experiments, from control strategies to image processing algorithms, from graphical user interface design for educational purposes to Simulink embedded systems

Low delay video coding

Analogue wireless cameras have been employed for decades, however they have not become an universal solution due to their difficulties of set up and use. The main problem is the link robustness which mainly depends on the requirement of a line-of-sight view between transmitter and receiver, a working condition not always possible. Despite the use of tracking antenna system such as the Portable Intelligent Tracking Antenna (PITA [1]), if strong multipath fading occurs (e.g. obstacles between transmitter and receiver) the picture rapidly falls apart. Digital wireless cameras based on Orthogonal Frequency Division Multiplexing (OFDM) modulation schemes give a valid solution for the above problem. OFDM offers strong multipath protection due to the insertion of the guard interval; in particular, the OFDM-based DVB-T standard has proven to offer excellent performance for the broadcasting of multimedia streams with bit rates over 10 Mbps in difficult terrestrial propagation channels, for fixed and portable applications. However, in typical conditions, the latency needed to compress/decompress a digital video signal at Standard Definition (SD) resolution is of the order of 15 frames, which corresponds to ≃ 0.5 sec. This delay introduces a serious problem when wireless and wired cameras have to be interfaced. Cabled cameras do not use compression, because the cable which directly links transmitter and receiver does not impose restrictive bandwidth constraints. Therefore, the only latency that affects a cable cameras link system is the on cable propagation delay, almost not significant, when switching between wired and wireless cameras, the residual latency makes it impossible to achieve the audio-video synchronization, with consequent disagreeable effects. A way to solve this problem is to provide a low delay digital processing scheme based on a video coding algorithm which avoids massive intermediate data storage. The analysis of the last MPEG based coding standards puts in evidence a series of problems which limits the real performance of a low delay MPEG coding system. The first effort of this work is to study the MPEG standard to understand its limit from both the coding delay and implementation complexity points of views. This thesis also investigates an alternative solution based on HERMES codec, a proprietary algorithm which is described implemented and evaluated. HERMES achieves better results than MPEG in terms of latency and implementation complexity, at the price of higher compression ratios, which means high output bit rates. The use of HERMES codec together with an enhanced OFDM system [2] leads to a competitive solution for wireless digital professional video applications

Pre-processing, classification and semantic querying of large-scale Earth observation spaceborne/airborne/terrestrial image databases: Process and product innovations.

By definition of Wikipedia, “big data is the term adopted for a collection of data sets so large and complex that it becomes difficult to process using on-hand database management tools or traditional data processing applications. The big data challenges typically include capture, curation, storage, search, sharing, transfer, analysis and visualization”. Proposed by the intergovernmental Group on Earth Observations (GEO), the visionary goal of the Global Earth Observation System of Systems (GEOSS) implementation plan for years 2005-2015 is systematic transformation of multisource Earth Observation (EO) “big data” into timely, comprehensive and operational EO value-adding products and services, submitted to the GEO Quality Assurance Framework for Earth Observation (QA4EO) calibration/validation (Cal/Val) requirements. To date the GEOSS mission cannot be considered fulfilled by the remote sensing (RS) community. This is tantamount to saying that past and existing EO image understanding systems (EO-IUSs) have been outpaced by the rate of collection of EO sensory big data, whose quality and quantity are ever-increasing. This true-fact is supported by several observations. For example, no European Space Agency (ESA) EO Level 2 product has ever been systematically generated at the ground segment. By definition, an ESA EO Level 2 product comprises a single-date multi-spectral (MS) image radiometrically calibrated into surface reflectance (SURF) values corrected for geometric, atmospheric, adjacency and topographic effects, stacked with its data-derived scene classification map (SCM), whose thematic legend is general-purpose, user- and application-independent and includes quality layers, such as cloud and cloud-shadow. Since no GEOSS exists to date, present EO content-based image retrieval (CBIR) systems lack EO image understanding capabilities. Hence, no semantic CBIR (SCBIR) system exists to date either, where semantic querying is synonym of semantics-enabled knowledge/information discovery in multi-source big image databases. In set theory, if set A is a strict superset of (or strictly includes) set B, then A B. This doctoral project moved from the working hypothesis that SCBIR computer vision (CV), where vision is synonym of scene-from-image reconstruction and understanding EO image understanding (EO-IU) in operating mode, synonym of GEOSS ESA EO Level 2 product human vision. Meaning that necessary not sufficient pre-condition for SCBIR is CV in operating mode, this working hypothesis has two corollaries. First, human visual perception, encompassing well-known visual illusions such as Mach bands illusion, acts as lower bound of CV within the multi-disciplinary domain of cognitive science, i.e., CV is conditioned to include a computational model of human vision. Second, a necessary not sufficient pre-condition for a yet-unfulfilled GEOSS development is systematic generation at the ground segment of ESA EO Level 2 product. Starting from this working hypothesis the overarching goal of this doctoral project was to contribute in research and technical development (R&D) toward filling an analytic and pragmatic information gap from EO big sensory data to EO value-adding information products and services. This R&D objective was conceived to be twofold. First, to develop an original EO-IUS in operating mode, synonym of GEOSS, capable of systematic ESA EO Level 2 product generation from multi-source EO imagery. EO imaging sources vary in terms of: (i) platform, either spaceborne, airborne or terrestrial, (ii) imaging sensor, either: (a) optical, encompassing radiometrically calibrated or uncalibrated images, panchromatic or color images, either true- or false color red-green-blue (RGB), multi-spectral (MS), super-spectral (SS) or hyper-spectral (HS) images, featuring spatial resolution from low (> 1km) to very high (< 1m), or (b) synthetic aperture radar (SAR), specifically, bi-temporal RGB SAR imagery. The second R&D objective was to design and develop a prototypical implementation of an integrated closed-loop EO-IU for semantic querying (EO-IU4SQ) system as a GEOSS proof-of-concept in support of SCBIR. The proposed closed-loop EO-IU4SQ system prototype consists of two subsystems for incremental learning. A primary (dominant, necessary not sufficient) hybrid (combined deductive/top-down/physical model-based and inductive/bottom-up/statistical model-based) feedback EO-IU subsystem in operating mode requires no human-machine interaction to automatically transform in linear time a single-date MS image into an ESA EO Level 2 product as initial condition. A secondary (dependent) hybrid feedback EO Semantic Querying (EO-SQ) subsystem is provided with a graphic user interface (GUI) to streamline human-machine interaction in support of spatiotemporal EO big data analytics and SCBIR operations. EO information products generated as output by the closed-loop EO-IU4SQ system monotonically increase their value-added with closed-loop iterations

Shortest Route at Dynamic Location with Node Combination-Dijkstra Algorithm

Abstract— Online transportation has become a basic requirement of the general public in support of all activities to go to work, school or vacation to the sights. Public transportation services compete to provide the best service so that consumers feel comfortable using the services offered, so that all activities are noticed, one of them is the search for the shortest route in picking the buyer or delivering to the destination. Node Combination method can minimize memory usage and this methode is more optimal when compared to A* and Ant Colony in the shortest route search like Dijkstra algorithm, but can’t store the history node that has been passed. Therefore, using node combination algorithm is very good in searching the shortest distance is not the shortest route. This paper is structured to modify the node combination algorithm to solve the problem of finding the shortest route at the dynamic location obtained from the transport fleet by displaying the nodes that have the shortest distance and will be implemented in the geographic information system in the form of map to facilitate the use of the system. Keywords— Shortest Path, Algorithm Dijkstra, Node Combination, Dynamic Location (key words

FlexWAFE - eine Architektur für rekonfigurierbare-Bildverarbeitungssysteme

Recently there has been an increase in demand for high-resolution digital media content in both cinema and television industries. Currently existing equipment does not meet the requirements, or is too costly. New hardware systems and new programming techniques are needed in order to meet the high-resolution, high-quality, image requirements and reduce costs. The industry seeks a flexible architecture capable of running multiple applications on top of standard off-the-shelf components, with reduced development time. Until now, standard practice has been to develop specialized architectures and systems that target a single application. This has little flexibility and leads to high developments costs, every new application is designed almost from scratch. Our focus was to develop an architecture that is suited to image stream processing and has the flexibility to run multiple applications using the same FPGA-based hardware platform. The novelty in our approach is that we reconfigure parts of the architecture at run-time, but without incurring in the time and added constraints penalty of FPGA-partial-reconfiguration techniques. The architecture uses a hierarchical control structure that is well suited to parallel processing, and allows single cycle latency reconfiguration of parts of the processing pipeline. This is achieved using relatively little resources for the distributed control structures. To test the developed architecture a complex film-grain noise reduction algorithm was implemented on an off-the-shelf hardware platform developed by Thomson-Grass Valley. The system meet all the requirements and had very little load on the hierarchical control structures, there is growth headroom for much complexer control demands. The architecture has been ported to other hardware platforms, and other applications have been implemented as well. The run-time reconfigurability has proven to be a key factor in the success of the FlexWAFE.Kürzlich gab es eine Zunahme der Nachfrage nach hochauflösenden digitalen Medieninhalten in den Kino- und Fernsehenindustrien. Derzeit vorhandene Systeme entsprechen nicht den Anforderungen, oder sind zu teuer. Neue Hardware-Systeme und neuer Programmiertechniken sind erforderlich, um den hochauflösenden, hochwertigen, Bildanforderungen zu genügen und Kosten zu verringern. Die Industrie sucht eine flexible Architektur zur Ausführung mehrerer Anwendungen auf Standard-Komponenten, mit reduzierten Entwicklungszeiten. Bis jetzt ist gängige Praxis, spezialisierten Architektur und Systeme zu entwickeln, die eine einzelne Anwendung zielen. Dieses hat wenig Flexibilität und führt zu hohe Entwicklungskosten, jede neue Anwendung ist fast von Grund auf neu konzipiert. Unser Fokus war es, eine für Bild Verarbeitung geeignet Architektur zu entwickeln dass die Flexibilität hat mehrere Anwendungen an dieselbe FPGA-basierte Hardware-Plattform zu laufen. Die Neuheit in unserem Ansatz ist, dass wir Teile der Architektur zur Laufzeit rekonfigurieren, aber, ohne das Zeit und constraints strafe von FPGA Partielle-Rekonfiguration-Techniken. Die Architektur verwendet eine hierarchische Kontrollstruktur, die zur parallel Verarbeitung gut geeignet ist, und Single-Cycle-Latenz Rekonfiguration von Teilen der Verarbeitungs-Pipeline ermöglicht. Dieses wird unter Verwendung relativ weniger Ressourcen für die verteiltes Steuerung Strukturen erzielt. Um das entwickelte Architektur zu testen ein komplexer Film-Korn-Rauschunterdrückung Algorithmus wurde auf einer von Thomson-Grass Valley entwickelt standard Hardware-Plattform umgesetzt. Das System erfüllt alle Anforderungen und hatte sehr wenig Last auf den hierarchischen Kontrollstrukturen, es gibt viel Wachstum Spielraum für viel kompliziertere Steuerunganforderungen. Die Architektur ist zu anderen Hardwareplattformen portiert worden, und andere Anwendungen wurden ebenfalls implementiert. Der Laufzeitreconfigurability ist ein Schlüsselfaktor im Erfolg des FlexWAFE gewesen

NASA Tech Briefs, August 1991

Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences