4,258 research outputs found
Physical parameter-aware Networks-on-Chip design
PhD ThesisNetworks-on-Chip (NoCs) have been proposed as a scalable, reliable
and power-efficient communication fabric for chip multiprocessors
(CMPs) and multiprocessor systems-on-chip (MPSoCs). NoCs determine
both the performance and the reliability of such systems, with a
significant power demand that is expected to increase due to developments
in both technology and architecture. In terms of architecture, an
important trend in many-core systems architecture is to increase the
number of cores on a chip while reducing their individual complexity.
This trend increases communication power relative to computation
power. Moreover, technology-wise, power-hungry wires are dominating
logic as power consumers as technology scales down. For these
reasons, the design of future very large scale integration (VLSI) systems
is moving from being computation-centric to communication-centric.
On the other hand, chip’s physical parameters integrity, especially
power and thermal integrity, is crucial for reliable VLSI systems. However,
guaranteeing this integrity is becoming increasingly difficult with
the higher scale of integration due to increased power density and operating
frequencies that result in continuously increasing temperature
and voltage drops in the chip. This is a challenge that may prevent
further shrinking of devices. Thus, tackling the challenge of power
and thermal integrity of future many-core systems at only one level
of abstraction, the chip and package design for example, is no longer
sufficient to ensure the integrity of physical parameters. New designtime
and run-time strategies may need to work together at different
levels of abstraction, such as package, application, network, to provide
the required physical parameter integrity for these large systems. This
necessitates strategies that work at the level of the on-chip network
with its rising power budget.
This thesis proposes models, techniques and architectures to improve
power and thermal integrity of Network-on-Chip (NoC)-based
many-core systems. The thesis is composed of two major parts: i)
minimization and modelling of power supply variations to improve
power integrity; and ii) dynamic thermal adaptation to improve thermal
integrity. This thesis makes four major contributions. The first is
a computational model of on-chip power supply variations in NoCs.
The proposed model embeds a power delivery model, an NoC activity
simulator and a power model. The model is verified with SPICE simulation
and employed to analyse power supply variations in synthetic
and real NoC workloads. Novel observations regarding power supply
noise correlation with different traffic patterns and routing algorithms
are found. The second is a new application mapping strategy aiming
vii
to minimize power supply noise in NoCs. This is achieved by defining
a new metric, switching activity density, and employing a force-based
objective function that results in minimizing switching density. Significant
reductions in power supply noise (PSN) are achieved with a low
energy penalty. This reduction in PSN also results in a better link timing
accuracy. The third contribution is a new dynamic thermal-adaptive
routing strategy to effectively diffuse heat from the NoC-based threedimensional
(3D) CMPs, using a dynamic programming (DP)-based distributed
control architecture. Moreover, a new approach for efficient extension
of two-dimensional (2D) partially-adaptive routing algorithms
to 3D is presented. This approach improves three-dimensional networkon-
chip (3D NoC) routing adaptivity while ensuring deadlock-freeness.
Finally, the proposed thermal-adaptive routing is implemented in
field-programmable gate array (FPGA), and implementation challenges,
for both thermal sensing and the dynamic control architecture are addressed.
The proposed routing implementation is evaluated in terms
of both functionality and performance.
The methodologies and architectures proposed in this thesis open a
new direction for improving the power and thermal integrity of future
NoC-based 2D and 3D many-core architectures
Embedded dynamic programming networks for networks-on-chip
PhD ThesisRelentless technology downscaling and recent technological advancements
in three dimensional integrated circuit (3D-IC) provide a promising
prospect to realize heterogeneous system-on-chip (SoC) and homogeneous
chip multiprocessor (CMP) based on the networks-onchip
(NoCs) paradigm with augmented scalability, modularity and
performance. In many cases in such systems, scheduling and managing
communication resources are the major design and implementation
challenges instead of the computing resources. Past research
efforts were mainly focused on complex design-time or simple heuristic
run-time approaches to deal with the on-chip network resource
management with only local or partial information about the network.
This could yield poor communication resource utilizations and amortize
the benefits of the emerging technologies and design methods.
Thus, the provision for efficient run-time resource management in
large-scale on-chip systems becomes critical. This thesis proposes a
design methodology for a novel run-time resource management infrastructure
that can be realized efficiently using a distributed architecture,
which closely couples with the distributed NoC infrastructure. The
proposed infrastructure exploits the global information and status
of the network to optimize and manage the on-chip communication
resources at run-time.
There are four major contributions in this thesis. First, it presents a
novel deadlock detection method that utilizes run-time transitive closure
(TC) computation to discover the existence of deadlock-equivalence
sets, which imply loops of requests in NoCs. This detection scheme,
TC-network, guarantees the discovery of all true-deadlocks without
false alarms in contrast to state-of-the-art approximation and heuristic
approaches. Second, it investigates the advantages of implementing
future on-chip systems using three dimensional (3D) integration and
presents the design, fabrication and testing results of a TC-network
implemented in a fully stacked three-layer 3D architecture using a
through-silicon via (TSV) complementary metal-oxide semiconductor
(CMOS) technology. Testing results demonstrate the effectiveness
of such a TC-network for deadlock detection with minimal computational
delay in a large-scale network. Third, it introduces an adaptive
strategy to effectively diffuse heat throughout the three dimensional
network-on-chip (3D-NoC) geometry. This strategy employs a dynamic
programming technique to select and optimize the direction of data
manoeuvre in NoC. It leads to a tool, which is based on the accurate
HotSpot thermal model and SystemC cycle accurate model, to simulate
the thermal system and evaluate the proposed approach. Fourth, it
presents a new dynamic programming-based run-time thermal management
(DPRTM) system, including reactive and proactive schemes, to
effectively diffuse heat throughout NoC-based CMPs by routing packets
through the coolest paths, when the temperature does not exceed
chip’s thermal limit. When the thermal limit is exceeded, throttling is
employed to mitigate heat in the chip and DPRTM changes its course
to avoid throttled paths and to minimize the impact of throttling on
chip performance.
This thesis enables a new avenue to explore a novel run-time resource
management infrastructure for NoCs, in which new methodologies
and concepts are proposed to enhance the on-chip networks for
future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)
Exploration and Design of Power-Efficient Networked Many-Core Systems
Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level.
From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques.
From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented.
Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast
Thermal-Aware Networked Many-Core Systems
Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors.
This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.Siirretty Doriast
A Survey of Software-Defined Networks-on-Chip: Motivations, Challenges and Opportunities
Current computing platforms encourage the integration of thousands of processing cores,
and their interconnections, into a single chip. Mobile smartphones, IoT, embedded devices, desktops,
and data centers use Many-Core Systems-on-Chip (SoCs) to exploit their compute power and
parallelism to meet the dynamic workload requirements. Networks-on-Chip (NoCs) lead to scalable
connectivity for diverse applications with distinct traffic patterns and data dependencies. However,
when the system executes various applications in traditional NoCs—optimized and fixed at synthesis
time—the interconnection nonconformity with the different applications’ requirements generates
limitations in the performance. In the literature, NoC designs embraced the Software-Defined
Networking (SDN) strategy to evolve into an adaptable interconnection solution for future chips.
However, the works surveyed implement a partial Software-Defined Network-on-Chip (SDNoC)
approach, leaving aside the SDN layered architecture that brings interoperability in conventional
networking. This paper explores the SDNoC literature and classifies it regarding the desired SDN
features that each work presents. Then, we described the challenges and opportunities detected
from the literature survey. Moreover, we explain the motivation for an SDNoC approach, and we
expose both SDN and SDNoC concepts and architectures. We observe that works in the literature
employed an uncomplete layered SDNoC approach. This fact creates various fertile areas in the
SDNoC architecture where researchers may contribute to Many-Core SoCs designs.Las plataformas informáticas actuales fomentan la integración de miles de núcleos de procesamiento
y sus interconexiones, en un solo chip. Los smartphones mĂłviles, el IoT, los dispositivos embebidos, los ordenadores de sobremesa y los centros de datos utilizan sistemas en chip (SoC) de muchos nĂşcleos para explotar su potencia de cálculo y paralelismo para satisfacer los requisitos de las cargas de trabajo dinámicas. Las redes en chip (NoC) conducen a una conectividad escalable para diversas aplicaciones con distintos patrones de tráfico y dependencias de datos. Sin embargo, cuando el sistema ejecuta varias aplicaciones en las NoC tradicionales -optimizadas y fijadas en el momento de sĂntesis, la disconformidad de la interconexiĂłn con los requisitos de las distintas aplicaciones genera limitaciones en el rendimiento. En la literatura, los diseños de NoC adoptaron la estrategia de redes definidas por software (SDN) para evolucionar hacia una soluciĂłn de interconexiĂłn adaptable para los futuros chips.
Sin embargo, los trabajos estudiados implementan un enfoque parcial de red definida por software en el chip (SDNoC) de SDN, dejando de lado la arquitectura en capas de SDN que aporta interoperabilidad en la red convencional. Este artĂculo explora la literatura sobre SDNoC y la clasifica en funciĂłn de las caracterĂsticas SDN que presenta cada trabajo. A continuaciĂłn, describimos los retos y oportunidades detectados a partir del estudio de la literatura. Además, explicamos la motivaciĂłn para un enfoque SDNoC, y
exponemos los conceptos y arquitecturas de SDN y SDNoC. Observamos que los trabajos en la literatura
emplean un enfoque SDNoC por capas no completo. Este hecho crea varias áreas fértiles en la
arquitectura SDNoC en las que los investigadores pueden contribuir a los diseños de SoCs de muchos núcleos
Scalability of broadcast performance in wireless network-on-chip
Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version
Automated Hardware Prototyping for 3D Network on Chips
Vor mehr als 50 Jahren stellte Intel® Mitbegründer Gordon Moore eine Prognose zum Entwicklungsprozess der Transistortechnologie auf. Er prognostizierte, dass sich die Zahl der Transistoren in integrierten Schaltungen alle zwei Jahre verdoppeln wird. Seine Aussage ist immer noch gültig, aber ein Ende von Moores Gesetz ist in Sicht. Mit dem Ende von Moore’s Gesetz müssen neue Aspekte untersucht werden, um weiterhin die Leistung von integrierten Schaltungen zu steigern. Zwei mögliche Ansätze für "More than Moore” sind 3D-Integrationsverfahren und heterogene Systeme. Gleichzeitig entwickelt sich ein Trend hin zu Multi-Core Prozessoren, basierend auf Networks on chips (NoCs).
Neben dem Ende des Mooreschen Gesetzes ergeben sich bei immer kleiner werdenden Technologiegrößen, vor allem jenseits der 60 nm, neue Herausforderungen. Eine Schwierigkeit ist die Wärmeableitung in großskalierten integrierten Schaltkreisen und die daraus resultierende Überhitzung des Chips. Um diesem Problem in modernen Multi-Core Architekturen zu begegnen, muss auch die Verlustleistung der Netzwerkressourcen stark reduziert werden. Diese Arbeit umfasst eine durch Hardware gesteuerte Kombination aus Frequenzskalierung und Power Gating für 3D On-Chip Netzwerke, einschließlich eines FPGA Prototypen. Dafür wurde ein Takt-synchrones 2D Netzwerk auf ein dreidimensionales asynchrones Netzwerk mit mehreren Frequenzbereichen erweitert. Zusätzlich wurde ein skalierbares Online-Power-Management System mit geringem Ressourcenaufwand entwickelt.
Die Verifikation neuer Hardwarekomponenten ist einer der zeitaufwendigsten Schritte im Entwicklungsprozess hochintegrierter digitaler Schaltkreise. Um diese Aufgabe zu beschleunigen und um eine parallele Softwareentwicklung zu ermöglichen, wurde im Rahmen dieser Arbeit ein automatisiertes und benutzerfreundliches Tool für den Entwurf neuer Hardware Projekte entwickelt. Eine grafische Benutzeroberfläche zum Erstellen des gesamten Designablaufs, vom Erstellen der Architektur, Parameter Deklaration, Simulation, Synthese und Test ist Teil dieses Werkzeugs. Zudem stellt die Größe der Architektur für die Erstellung eines Prototypen eine besondere Herausforderung dar. Frühere Arbeiten haben es versäumt, eine schnelles und unkompliziertes Prototyping, insbesondere von Architekturen mit mehr als 50 Prozessorkernen, zu realisieren. Diese Arbeit umfasst eine Design Space Exploration und FPGA-basierte Prototypen von verschiedenen 3D-NoC Implementierungen mit mehr als 80 Prozessoren
Classification of networks-on-chip in the context of analysis of promising self-organizing routing algorithms
This paper contains a detailed analysis of the current state of the
network-on-chip (NoC) research field, based on which the authors propose the
new NoC classification that is more complete in comparison with previous ones.
The state of the domain associated with wireless NoC is investigated, as the
transition to these NoCs reduces latency. There is an assumption that routing
algorithms from classical network theory may demonstrate high performance. So,
in this article, the possibility of the usage of self-organizing algorithms in
a wireless NoC is also provided. This approach has a lot of advantages
described in the paper. The results of the research can be useful for
developers and NoC manufacturers as specific recommendations, algorithms,
programs, and models for the organization of the production and technological
process.Comment: 10 p., 5 fig. Oral presentation on APSSE 2021 conferenc
A survey on scheduling and mapping techniques in 3D Network-on-chip
Network-on-Chips (NoCs) have been widely employed in the design of
multiprocessor system-on-chips (MPSoCs) as a scalable communication solution.
NoCs enable communications between on-chip Intellectual Property (IP) cores and
allow those cores to achieve higher performance by outsourcing their
communication tasks. Mapping and Scheduling methodologies are key elements in
assigning application tasks, allocating the tasks to the IPs, and organising
communication among them to achieve some specified objectives. The goal of this
paper is to present a detailed state-of-the-art of research in the field of
mapping and scheduling of applications on 3D NoC, classifying the works based
on several dimensions and giving some potential research directions
- …