Automatic detection of welding defects using the convolutional neural network

Quality control of welded joints is an important step before commissioning of various types of metal structures. The main obstacles to the commissioning of such facilities are the areas where the welded joint deviates from acceptable defective standards. The defects of welded joints include non-welded, foreign inclusions, cracks, pores, etc. The article describes an approach to the detection of the main types of defects of welded joints using a combination of convolutional neural networks and support vector machine methods. Convolutional neural networks are used for primary classification. The support vector machine is used to accurately define defect boundaries. As a preprocessing in our work, we use the methods of morphological filtration. A series of experiments confirms the high efficiency of the proposed method in comparison with pure CNN method for detecting defects

Development Of A Computed Radiography-Based Weld Defect Detection And Classification System [RC78.7.D35 K75 2008 f rb].

Dalam penyelidikan ini, satu sistem bersepadu yang terdiri daripada satu peta kecacatan dan satu pengelas pelbagai rangkaian neural bagi peruasan, pengesanan dan pengesanan kecacatan kimpalan telah direkabentuk dan dibangun. In this research, an integrated system consisting of a flaw map and a multiple neural network classifier for weld defect segmentation, detection, and classification is designed and developed

A study of hough transform for weld extraction

The process of joining metals is called welding. At times, selecting a poor quality material or improper usage of welding technologies may cause defects in welded joints. Some of these welded joints have to be tested nondestructively, because their failure can cause lot of damage, for instance in power plants. Radiography is a very common method for non-destructive testing of welds. It is done by certified weld inspectors who have knowledge about weld flaws, looking at the radiograph of the welded joint with naked eye. The judgment of the weld inspector can be biased; subjective, because it is dependent on his/her experience. This manual method can also become very time consuming. Many researches were exploring computer aided examination of radiographic images in early 1990’s. With much advancement in computer vision and image processing technologies, they are being used to find more effective ways of automatic weld inspection. These days, fuzzy based methods are being widely used in this area too. The first step in automatic weld inspection is to locate the welds or find a Region of Interest (ROI) in the radiographic image [7]. In this thesis, a Standard Hough Transform (SHT) based methodology is developed for weld extraction. Firstly, we have done binarization of image to remove the background and non-welds. For binarization, optimal binary threshold is found by a metaheuristic –Simulated annealing. Secondly, we use SHT to generate the Hough Transform matrix of all non-zero points in the binary image. Thirdly, we have explored two different paths to find a meaningful set of lines in the binarized image that are welds. Finally, these lines are verified as weld using a weld-peak detection procedure. Weld-peak detection is also helpful to remove any non-welds that were remaining. We have used 25 digitized radiographic images containing 100 welds to test the method in terms of true detection and false alarm rate

Image Analysis Based on Soft Computing and Applied on Space Shuttle During the Liftoff Process

Imaging techniques based on Soft Computing (SC) and developed at Kennedy Space Center (KSC) have been implemented on a variety of prototype applications related to the safety operation of the Space Shuttle during the liftoff process. These SC-based prototype applications include detection and tracking of moving Foreign Objects Debris (FOD) during the Space Shuttle liftoff, visual anomaly detection on slidewires used in the emergency egress system for the Space Shuttle at the laJlIlch pad, and visual detection of distant birds approaching the Space Shuttle launch pad. This SC-based image analysis capability developed at KSC was also used to analyze images acquired during the accident of the Space Shuttle Columbia and estimate the trajectory and velocity of the foam that caused the accident

A Hierarchical, Fuzzy Inference Approach to Data Filtration and Feature Prioritization in the Connected Manufacturing Enterprise

The current big data landscape is one such that the technology and capability to capture and storage of data has preceded and outpaced the corresponding capability to analyze and interpret it. This has led naturally to the development of elegant and powerful algorithms for data mining, machine learning, and artificial intelligence to harness the potential of the big data environment. A competing reality, however, is that limitations exist in how and to what extent human beings can process complex information. The convergence of these realities is a tension between the technical sophistication or elegance of a solution and its transparency or interpretability by the human data scientist or decision maker. This dissertation, contextualized in the connected manufacturing enterprise, presents an original Fuzzy Approach to Feature Reduction and Prioritization (FAFRAP) approach that is designed to assist the data scientist in filtering and prioritizing data for inclusion in supervised machine learning models. A set of sequential filters reduces the initial set of independent variables, and a fuzzy inference system outputs a crisp numeric value associated with each feature to rank order and prioritize for inclusion in model training. Additionally, the fuzzy inference system outputs a descriptive label to assist in the interpretation of the feature’s usefulness with respect to the problem of interest. Model testing is performed using three publicly available datasets from an online machine learning data repository and later applied to a case study in electronic assembly manufacture. Consistency of model results is experimentally verified using Fisher’s Exact Test, and results of filtered models are compared to results obtained by the unfiltered sets of features using a proposed novel metric of performance-size ratio (PSR)

Computer-aided weld inspection by fuzzy modeling with selected features

This thesis develops a computer-aided weld inspection methodology based on fuzzy modeling with selected features. The proposed methodology employs several filter feature selection methods for selecting input variables and then builds fuzzy models with the selected features. Our fuzzy modeling method is based on a fuzzy c-means (FCM) variant for the generation of fuzzy terms sets. The implemented FCM variant differs from the original FCM method in two aspects: (1) the two end terms take the maximum and minimum domain values as their centers, and (2) all fuzzy terms are forced to be convex. The optimal number of terms and the optimal shape of the membership function associated with each term are determined based on the mean squared error criterion. The fuzzy model serves as the rule base of a fuzzy reasoning based expert system implemented. In this implementation, first the fuzzy rules are extracted from feature data one feature at a time based on the FCM variant. The total number of fuzzy rules is the product of the fuzzy terms for each feature. The performances of these fuzzy sets are then tested with unseen data in terms of accuracy rates and computational time. To evaluate the goodness of each selected feature subset, the selected combination is used as an input for the proposed fuzzy model. The accuracy of each selected feature subset along with the average error of the selected filter technique is reported. For comparison, the results of all possible combinations of the specified set of feature subsets are also obtained

State of AI-based monitoring in smart manufacturing and introduction to focused section

Over the past few decades, intelligentization, supported by artificial intelligence (AI) technologies, has become an important trend for industrial manufacturing, accelerating the development of smart manufacturing. In modern industries, standard AI has been endowed with additional attributes, yielding the so-called industrial artificial intelligence (IAI) that has become the technical core of smart manufacturing. AI-powered manufacturing brings remarkable improvements in many aspects of closed-loop production chains from manufacturing processes to end product logistics. In particular, IAI incorporating domain knowledge has benefited the area of production monitoring considerably. Advanced AI methods such as deep neural networks, adversarial training, and transfer learning have been widely used to support both diagnostics and predictive maintenance of the entire production process. It is generally believed that IAI is the critical technologies needed to drive the future evolution of industrial manufacturing. This article offers a comprehensive overview of AI-powered manufacturing and its applications in monitoring. More specifically, it summarizes the key technologies of IAI and discusses their typical application scenarios with respect to three major aspects of production monitoring: fault diagnosis, remaining useful life prediction, and quality inspection. In addition, the existing problems and future research directions of IAI are also discussed. This article further introduces the papers in this focused section on AI-based monitoring in smart manufacturing by weaving them into the overview, highlighting how they contribute to and extend the body of literature in this area

Industrial X-ray Image Analysis with Deep Neural Networks Robust to Unexpected Input Data

X-ray inspection is often an essential part of quality control within quality critical manufacturing industries. Within such industries, X-ray image interpretation is resource intensive and typically conducted by humans. An increased level of automatization would be preferable, and recent advances in artificial intelligence (e.g., deep learning) have been proposed as solutions. However, typically, such solutions are overconfident when subjected to new data far from the training data, so-called out-of-distribution (OOD) data; we claim that safe automatic interpretation of industrial X-ray images, as part of quality control of critical products, requires a robust confidence estimation with respect to OOD data. We explored if such a confidence estimation, an OOD detector, can be achieved by explicit modeling of the training data distribution, and the accepted images. For this, we derived an autoencoder model trained unsupervised on a public dataset with X-ray images of metal fusion welds and synthetic data. We explicitly demonstrate the dangers with a conventional supervised learning-based approach and compare it to the OOD detector. We achieve true positive rates of around 90% at false positive rates of around 0.1% on samples similar to the training data and correctly detect some example OOD data