The agricultural impact of the 2015–2016 floods in Ireland as mapped through Sentinel 1 satellite imagery

peer-reviewedIrish Journal of Agricultural and Food Research | Volume 58: Issue 1 The agricultural impact of the 2015–2016 floods in Ireland as mapped through Sentinel 1 satellite imagery R. O’Haraemail , S. Green and T. McCarthy DOI: https://doi.org/10.2478/ijafr-2019-0006 | Published online: 11 Oct 2019 PDF Abstract Article PDF References Recommendations Abstract The capability of Sentinel 1 C-band (5 cm wavelength) synthetic aperture radio detection and ranging (RADAR) (abbreviated as SAR) for flood mapping is demonstrated, and this approach is used to map the extent of the extensive floods that occurred throughout the Republic of Ireland in the winter of 2015–2016. Thirty-three Sentinel 1 images were used to map the area and duration of floods over a 6-mo period from November 2015 to April 2016. Flood maps for 11 separate dates charted the development and persistence of floods nationally. The maximum flood extent during this period was estimated to be ~24,356 ha. The depth of rainfall influenced the magnitude of flood in the preceding 5 d and over more extended periods to a lesser degree. Reduced photosynthetic activity on farms affected by flooding was observed in Landsat 8 vegetation index difference images compared to the previous spring. The accuracy of the flood map was assessed against reports of flooding from affected farms, as well as other satellite-derived maps from Copernicus Emergency Management Service and Sentinel 2. Monte Carlo simulated elevation data (20 m resolution, 2.5 m root mean square error [RMSE]) were used to estimate the flood’s depth and volume. Although the modelled flood height showed a strong correlation with the measured river heights, differences of several metres were observed. Future mapping strategies are discussed, which include high–temporal-resolution soil moisture data, as part of an integrated multisensor approach to flood response over a range of spatial scales

Multisource and Multitemporal Data Fusion in Remote Sensing

The sharp and recent increase in the availability of data captured by different sensors combined with their considerably heterogeneous natures poses a serious challenge for the effective and efficient processing of remotely sensed data. Such an increase in remote sensing and ancillary datasets, however, opens up the possibility of utilizing multimodal datasets in a joint manner to further improve the performance of the processing approaches with respect to the application at hand. Multisource data fusion has, therefore, received enormous attention from researchers worldwide for a wide variety of applications. Moreover, thanks to the revisit capability of several spaceborne sensors, the integration of the temporal information with the spatial and/or spectral/backscattering information of the remotely sensed data is possible and helps to move from a representation of 2D/3D data to 4D data structures, where the time variable adds new information as well as challenges for the information extraction algorithms. There are a huge number of research works dedicated to multisource and multitemporal data fusion, but the methods for the fusion of different modalities have expanded in different paths according to each research community. This paper brings together the advances of multisource and multitemporal data fusion approaches with respect to different research communities and provides a thorough and discipline-specific starting point for researchers at different levels (i.e., students, researchers, and senior researchers) willing to conduct novel investigations on this challenging topic by supplying sufficient detail and references

Detecting natural disasters, damage, and incidents in the wild

Responding to natural disasters, such as earthquakes, floods, and wildfires, is a laborious task performed by on-the-ground emergency responders and analysts. Social media has emerged as a low-latency data source to quickly understand disaster situations. While most studies on social media are limited to text, images offer more information for understanding disaster and incident scenes. However, no large-scale image datasets for incident detection exists. In this work, we present the Incidents Dataset, which contains 446,684 images annotated by humans that cover 43 incidents across a variety of scenes. We employ a baseline classification model that mitigates false-positive errors and we perform image filtering experiments on millions of social media images from Flickr and Twitter. Through these experiments, we show how the Incidents Dataset can be used to detect images with incidents in the wild. Code, data, and models are available online at http://incidentsdataset.csail.mit.edu.Comment: ECCV 202

Multisource and multitemporal data fusion in remote sensing:A comprehensive review of the state of the art

The recent, sharp increase in the availability of data captured by different sensors, combined with their considerable heterogeneity, poses a serious challenge for the effective and efficient processing of remotely sensed data. Such an increase in remote sensing and ancillary data sets, however, opens up the possibility of utilizing multimodal data sets in a joint manner to further improve the performance of the processing approaches with respect to applications at hand. Multisource data fusion has, therefore, received enormous attention from researchers worldwide for a wide variety of applications. Moreover, thanks to the revisit capability of several

Urban Sprawl and COVID-19 Impact Analysis by Integrating Deep Learning with Google Earth Engine

Timely information on land use, vegetation coverage, and air and water quality, are crucial for monitoring and managing territories, especially for areas in which there is dynamic urban expansion. However, getting accessible, accurate, and reliable information is not an easy task, since the significant increase in remote sensing data volume poses challenges for the timely processing and analysis of the resulting massive data volume. From this perspective, classical methods for urban monitoring present some limitations and more innovative technologies, such as artificial-intelligence-based algorithms, must be exploited, together with performing cloud platforms and ad hoc pre-processing steps. To this end, this paper presents an approach to the use of cloud-enabled deep-learning technology for urban sprawl detection and monitoring, through the fusion of optical and synthetic aperture radar data, by integrating the Google Earth Engine cloud platform with deep-learning techniques through the use of the open-source TensorFlow library. The model, based on a U-Net architecture, was applied to evaluate urban changes in Phoenix, the second fastest-growing metropolitan area in the United States. The available ancillary information on newly built areas showed good agreement with the produced change detection maps. Moreover, the results were temporally related to the appearance of the SARS-CoV-2 (commonly known as COVID-19) pandemic, showing a decrease in urban expansion during the event. The proposed solution may be employed for the efficient management of dynamic urban areas, providing a decision support system to help policy makers in the measurement of changes in territories and to monitor their impact on phenomena related to urbanization growth and density. The reference data were manually derived by the authors over an area of approximately 216 km2, referring to 2019, based on the visual interpretation of high resolution images, and are openly available

Automatic registration of multi-modal airborne imagery

This dissertation presents a novel technique based on Maximization of Mutual Information (MMI) and multi-resolution to design an algorithm for automatic registration of multi-sensor images captured by various airborne cameras. In contrast to conventional methods that extract and employ feature points, MMI-based algorithms utilize the mutual information found between two given images to compute the registration parameters. These, in turn, are then utilized to perform multi-sensor registration for remote sensing images. The results indicate that the proposed algorithms are very effective in registering infrared images taken at three different wavelengths with a high resolution visual image of a given scene. The MMI technique has proven to be very robust with images acquired with the Wild Airborne Sensor Program (WASP) multi-sensor instrument. This dissertation also shows how wavelet based techniques can be used in a multi-resolution analysis framework to significantly increase computational efficiency for images captured at different resolutions. The fundamental result of this thesis is the technique of using features in the images to enhance the robustness, accuracy and speed of MMI registration. This is done by using features to focus MMI on places that are rich in information. The new algorithm smoothly integrates with MMI and avoids any need for feature-matching, and then the applications of such extensions are studied. The first extension is the registration of cartographic maps and image datum, which is very important for map updating and change detection. This is a difficult problem because map features such as roads and buildings may be mis-located and features extracted from images may not correspond to map features. Nonetheless, it is possible to obtain a general global registration of maps and images by applying statistical techniques to map and image features. To solve the map-to-image registration problem this research extends the MMI technique through a focus-of-attention mechanism that forces MMI to utilize correspondences that have a high probability of being information rich. The gradient-based parameter search and exhaustive parameter search methods are also compared. Both qualitative and quantitative analysis are used to assess the registration accuracy. Another difficult application is the fusion of the LIDAR elevation or intensity data with imagery. Such applications are even more challenging when automated registrations algorithms are needed. To improve the registration robustness, a salient area extraction algorithm is developed to overcome the distortion in the airborne and satellite images from different sensors. This extension combines the SIFT and Harris feature detection algorithms with MMI and the Harris corner label map to address difficult multi-modal registration problems through a combination of selection and focus-of-attention mechanisms together with mutual information. This two-step approach overcomes the above problems and provides a good initialization for the final step of the registration process. Experimental results are provided that demonstrate a variety of mapping applications including multi-modal IR imagery, map and image registration and image and LIDAR registration

Advanced Location-Based Technologies and Services

Since the publication of the first edition in 2004, advances in mobile devices, positioning sensors, WiFi fingerprinting, and wireless communications, among others, have paved the way for developing new and advanced location-based services (LBSs). This second edition provides up-to-date information on LBSs, including WiFi fingerprinting, mobile computing, geospatial clouds, geospatial data mining, location privacy, and location-based social networking. It also includes new chapters on application areas such as LBSs for public health, indoor navigation, and advertising. In addition, the chapter on remote sensing has been revised to address advancements

Improving Flood Detection and Monitoring through Remote Sensing

As climate-change- and human-induced floods inflict increasing costs upon the planet, both in terms of lives and environmental damage, flood monitoring tools derived from remote sensing platforms have undergone improvements in their performance and capabilities in terms of spectral, spatial and temporal extents and resolutions. Such improvements raise new challenges connected to data analysis and interpretation, in terms of, e.g., effectively discerning the presence of floodwaters in different land-cover types and environmental conditions or refining the accuracy of detection algorithms. In this sense, high expectations are placed on new methods that integrate information obtained from multiple techniques, platforms, sensors, bands and acquisition times. Moreover, the assessment of such techniques strongly benefits from collaboration with hydrological and/or hydraulic modeling of the evolution of flood events. The aim of this Special Issue is to provide an overview of recent advancements in the state of the art of flood monitoring methods and techniques derived from remotely sensed data