Methodological evaluation of architectural alternatives for an aeronautical delay tolerant network

In this paper, we use graph analysis to evaluate the network architecture of a large scale delay tolerant network (DTN) of transoceanic aircraft. At LCN (Local Computer Networks) 2014 we analyzed information propagation inside a pure opportunistic version of this network, a scenario constructed from more than 2,500 traces of transatlantic flights in which communications relied only on the sporadic contacts between airplanes. As only a small percentage of the nodes were capable of performing efficient air-to-ground communications we concluded the need to devise a more suitable network architecture by combining opportunistic and satellite communication systems. We propose a generic methodology based on graph analysis (both static and dynamic temporal) to evaluate the different ways to create this new architecture. We show the architectural combination that most improves the network delivery performance while minimizing its deployment costs

Security and Privacy Preservation in Vehicular Social Networks

Improving road safety and traffic efficiency has been a long-term endeavor for the government, automobile industry and academia. Recently, the U.S. Federal Communication Commission (FCC) has allocated a 75 MHz spectrum at 5.9 GHz for vehicular communications, opening a new door to combat the road fatalities by letting vehicles communicate to each other on the roads. Those communicating vehicles form a huge Ad Hoc Network, namely Vehicular Ad Hoc Network (VANET). In VANETs, a variety of applications ranging from the safety related (e.g. emergence report, collision warning) to the non-safety related (e.g., delay tolerant network, infortainment sharing) are enabled by vehicle-to-vehicle (V-2-V) and vehicle-to-roadside (V-2-I) communications. However, the flourish of VANETs still hinges on fully understanding and managing the challenging issues over which the public show concern, particularly, security and privacy preservation issues. If the traffic related messages are not authenticated and integrity-protected in VANETs, a single bogus and/or malicious message can potentially incur a terrible traffic accident. In addition, considering VANET is usually implemented in civilian scenarios where locations of vehicles are closely related to drivers, VANET cannot be widely accepted by the public if VANET discloses the privacy information of the drivers, i.e., identity privacy and location privacy. Therefore, security and privacy preservation must be well addressed prior to its wide acceptance. Over the past years, much research has been done on considering VANET's unique characteristics and addressed some security and privacy issues in VANETs; however, little of it has taken the social characteristics of VANET into consideration. In VANETs, vehicles are usually driven in a city environment, and thus we can envision that the mobility of vehicles directly reflects drivers' social preferences and daily tasks, for example, the places where they usually go for shopping or work. Due to these human factors in VANETs, not only the safety related applications but also the non-safety related applications will have some social characteristics. In this thesis, we emphasize VANET's social characteristics and introduce the concept of vehicular social network (VSN), where both the safety and non-safety related applications in VANETs are influenced by human factors including human mobility, human self-interest status, and human preferences. In particular, we carry on research on vehicular delay tolerant networks and infotainment sharing --- two important non-safety related applications of VSN, and address the challenging security and privacy issues related to them. The main contributions are, i) taking the human mobility into consideration, we first propose a novel social based privacy-preserving packet forwarding protocol, called SPRING, for vehicular delay tolerant network, which is characterized by deploying roadside units (RSUs) at high social intersections to assist in packet forwarding. With the help of high-social RSUs, the probability of packet drop is dramatically reduced and as a result high reliability of packet forwarding in vehicular delay tolerant network can be achieved. In addition, the SPRING protocol also achieves conditional privacy preservation and resist most attacks facing vehicular delay tolerant network, such as packet analysis attack, packet tracing attack, and black (grey) hole attacks. Furthermore, based on the ``Sacrificing the Plum Tree for the Peach Tree" --- one of the Thirty-Six Strategies of Ancient China, we also propose a socialspot-based packet forwarding (SPF) protocol for protecting receiver-location privacy, and present an effective pseudonyms changing at social spots strategy, called PCS, to facilitate vehicles to achieve high-level location privacy in vehicular social network; ii) to protect the human factor --- interest preference privacy in vehicular social networks, we propose an efficient privacy-preserving protocol, called FLIP, for vehicles to find like-mined ones on the road, which allows two vehicles sharing the common interest to identify each other and establish a shared session key, and at the same time, protects their interest privacy (IP) from other vehicles who do not share the same interest on the road. To generalize the FLIP protocol, we also propose a lightweight privacy-preserving scalar product computation (PPSPC) protocol, which, compared with the previously reported PPSPC protocols, is more efficient in terms of computation and communication overheads; and iii) to deal with the human factor -- self-interest issue in vehicular delay tolerant network, we propose a practical incentive protocol, called Pi, to stimulate self-interest vehicles to cooperate in forwarding bundle packets. Through the adoption of the proper incentive policies, the proposed Pi protocol can not only improve the whole vehicle delay tolerant network's performance in terms of high delivery ratio and low average delay, but also achieve the fairness among vehicles. The research results of the thesis should be useful to the implementation of secure and privacy-preserving vehicular social networks

A New RF Satellite Link Analyzing and Antenna Effect on Satellite Communication

Satellite communications (SatComs) recently, have admitted as a new technological advances that attracted and raised special investment and ventures. Space communication technology has found many application areas from costly, one-of-a-sort structures, to utilize again of technology on sequential tasks, to the progress of canonical protocols accepted by space agencies of lots of countries. Satellite communication has accepted as one of the important technologies for 5G backhauling, particularly on bandwidth request increased in 5G mobile broad band (eMBB) applications. This paper presents the efficiency of the satellite communication system using 16 QAM digital modulation technique for the X band. This digital modulation method presents high data rate in transmission without raising the bandwidth compared with other digital modulation methods. Applications are realized in Matlab environment and obtained conclusions are discussed such as power spectrum diagrams, constellation schemas and BER ratio for several bands such as 4, 8, 12, 16 GHz

NASA Tech Briefs, September 2011

Topics covered include: Fused Reality for Enhanced Flight Test Capabilities; Thermography to Inspect Insulation of Large Cryogenic Tanks; Crush Test Abuse Stand; Test Generator for MATLAB Simulations; Dynamic Monitoring of Cleanroom Fallout Using an Air Particle Counter; Enhancement to Non-Contacting Stress Measurement of Blade Vibration Frequency; Positively Verifying Mating of Previously Unverifiable Flight Connectors; Radiation-Tolerant Intelligent Memory Stack - RTIMS; Ultra-Low-Dropout Linear Regulator; Excitation of a Parallel Plate Waveguide by an Array of Rectangular Waveguides; FPGA for Power Control of MSL Avionics; UAVSAR Active Electronically Scanned Array; Lockout/Tagout (LOTO) Simulator; Silicon Carbide Mounts for Fabry-Perot Interferometers; Measuring the In-Process Figure, Final Prescription, and System Alignment of Large; Optics and Segmented Mirrors Using Lidar Metrology; Fiber-Reinforced Reactive Nano-Epoxy Composites; Polymerization Initiated at the Sidewalls of Carbon Nanotubes; Metal-Matrix/Hollow-Ceramic-Sphere Composites; Piezoelectrically Enhanced Photocathodes; Iridium-Doped Ruthenium Oxide Catalyst for Oxygen Evolution; Improved Mo-Re VPS Alloys for High-Temperature Uses; Data Service Provider Cost Estimation Tool; Hybrid Power Management-Based Vehicle Architecture; Force Limit System; Levitated Duct Fan (LDF) Aircraft Auxiliary Generator; Compact, Two-Sided Structural Cold Plate Configuration; AN Fitting Reconditioning Tool; Active Response Gravity Offload System; Method and Apparatus for Forming Nanodroplets; Rapid Detection of the Varicella Zoster Virus in Saliva; Improved Devices for Collecting Sweat for Chemical Analysis; Phase-Controlled Magnetic Mirror for Wavefront Correction; and Frame-Transfer Gating Raman Spectroscopy for Time-Resolved Multiscalar Combustion Diagnostics

From MANET to people-centric networking: Milestones and open research challenges

In this paper, we discuss the state of the art of (mobile) multi-hop ad hoc networking with the aim to present the current status of the research activities and identify the consolidated research areas, with limited research opportunities, and the hot and emerging research areas for which further research is required. We start by briefly discussing the MANET paradigm, and why the research on MANET protocols is now a cold research topic. Then we analyze the active research areas. Specifically, after discussing the wireless-network technologies, we analyze four successful ad hoc networking paradigms, mesh networks, opportunistic networks, vehicular networks, and sensor networks that emerged from the MANET world. We also present an emerging research direction in the multi-hop ad hoc networking field: people centric networking, triggered by the increasing penetration of the smartphones in everyday life, which is generating a people-centric revolution in computing and communications

Measurement, Modeling, and OFDM Synchronization for the Wideband Mobile-to-Mobile Channel

Wideband measurements of the mobile-to-mobile channel, especially of the harshest channels, are necessary for proper design and certification testing of mobile-to-mobile communications systems. A complete measurement implies that the Doppler and delay characteristics are measured jointly. However, such measurements have not previously been published. The main objective of the proposed research is to develop channel models for specific scenarios from data obtained in a wideband mobile-to-mobile measurement campaign in the 5.9 GHz frequency band. For this purpose we developed a channel sounding system including a novel combined waveform. In order to quantify and qualify either the recorded channel or the proposed generated channel, we developed a simulation test-bed that includes all the characteristics of the proposed digital short range communications (DSRC) standard. The resulting channel models needed to comply with the specifications required by hardware channel emulators or software channel simulators. From the obtained models, we selected one to be included in the IEEE 802.11p standard certification test. To further aid in the development of software radio based receivers, we also developed an orthogonal frequency division multiplexing (OFDM) synchronization algorithm to analyze and compensate synchronization errors produced by inaccessible system clocks.Ph.D.Committee Chair: Ingram, Mary Ann; Committee Member: Lanterman, Aaron; Committee Member: Li, Ye; Committee Member: Pratt, Thomas G.; Committee Member: Rogers, Peter H

BRT: Bus-based Routing Technique in Urban Vehicular Networks

International audienceRouting data in Vehicular Ad hoc Networks is still a challenging topic. The unpredictable mobility of nodes renders routing of data packets over optimal paths not always possible. Therefore, there is a need to enhance the routing service. Bus Rapid Transit systems, consisting of buses characterized by a regular mobility pattern, can be a good candidate for building a backbone to tackle the problem of uncontrolled mobility of nodes and to select appropriate routing paths for data delivery. For this purpose, we propose a new routing scheme called Bus-based Routing Technique (BRT) which exploits the periodic and predictable movement of buses to learn the required time (the temporal distance) for each data transmission to RoadSide Units (RSUs) through a dedicated bus-based backbone. Indeed, BRT comprises two phases: (i) Learning process which should be carried out, basically, one time to allow buses to build routing tables entries and expect the delay for routing data packets over buses, (ii) Data delivery process which exploits the pre-learned temporal distances to route data packets through the bus backbone towards an RSU (backbone mode). BRT uses other types of vehicles to boost the routing of data packets and also provides a maintenance procedure to deal with unexpected situations like a missing nexthop bus, which allows BRT to continue routing data packets. Simulation results show that BRT provides good performance results in terms of delivery ratio and end-to-end delay

Multiple moving target detection with ultra wideband radar using super-resolution algorithms

The improvements in microwave electronics opened the way to build microwave components such as low noise amplifiers, samplers and pulse generators that are broadband. As these building blocks are being developed, new applications become subject of research. Ultra wideband radar is one of these subjects. Major applications of ultra wideband radars are behind the wall imaging, biomedical imaging and buried land mine detection. In this study we aimed to locate multiple scatterers that are moving. Even though there are many scatterers in an environment, detection of moving targets is possible using differences of successive radar snapshots. This is generally the case when behind the wall human targets are to be detected. We investigated the effectiveness of various types Multiple Signal Classification (MUSIC) algorithms on the data acquired by our ultra wideband radar prototype. In ideal computer simulations, Time Reversal MUSIC (TRM) algorithm provides successful estimations of both directions and distances of multiple targets. However in practice where non-ideal effects are existent, the performance of TRM algorithm is estimating the target distances degrades. On the other hand, Delay Estimation MUSIC algorithm provides better estimates for the distances of the targets since it is less sensitive to phase noise. Combining the output of TRM algorithm for target directions and the output of Delay Estimation MUSIC method for target distances resulted in successful localization of targets. Experiments are performed using two moving targets in order to test the effectiveness the proposed processing scheme. The problem of detection ambiguities is also considered and several methods to resolve actual targets are presented