164 research outputs found

    Assistive control for non-contact machining of random shaped contours

    Get PDF
    Recent achievements in robotics and automation technology has opened the door towards different machining methodologies based on material removal. Considering the non force feedback nature of non-contact machining methods, careful attention on motion control design is a primary requirement for successful achievement of precise cutting both in machining and in surgery processes. This thesis is concerned with the design of pre-processing methods and motion control techniques to provide both automated and human-assistive non-contact machining of random and complex shaped contours. In that sense, the first part of the thesis focuses on extraction of contours and generation of reference trajectories or constraints for the machining system. Based on generated trajectories, two different control schemes are utilized for high precision automated machining. In the first scheme, preview control is adopted for enhancing the tracking performance. In the second scheme, control action is generated based on direct computation of contouring error in the operational space by introducing a new coordinate frame moving with the reference contour. Further, non-contact machining is extended for realization in a master/slave telerobotic framework to enable manual remote cutting by a human operator. With the proposed approach, the human operator (i.e. a surgeon) is limited to conduct motion within a desired virtual constraint and is equipped with the ability of adjusting the cutting depth over a that contour providing advantage for laser surgery applications. The proposed framework is experimentally tested and results of the experiments prove the applicability of proposed motion control schemes and show the validity of contributions made in the context of thesis

    Aerial Manipulators for Contact-based Interaction

    Get PDF

    Ground Robotic Hand Applications for the Space Program study (GRASP)

    Get PDF
    This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time

    A SERIAL-PARALLEL HYBRID ROBOT FOR MACHINING OF COMPLEX SURFACES

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    3-Axis and 5-Axis Machining with Stewart Platform

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    Multi-point static dexterous posture manipulation for the stiffness identification of serial kinematic end-effectors.

    Get PDF
    Masters Degree. University of KwaZulu-Natal, Durban.The low stiffness inherent in serial robots hinders its application to perform advanced operations due to its reduced accuracy imparted through deformations within the links and joints. The high repeatability, extended workspace, and speed of serial manipulators make them appealing to perform precision operations as opposed to its alternative, the CNC machine. However, due to the serial arrangement of the linkages of the system, they lack the accuracy to meet present-day demands. To address the low stiffness problem, this research provided a low-cost dexterous posture identification method. The study investigated the joint stiffness of a Fanuc M10-iA 6 Degree of Freedom (DOF) serial manipulator. The investigation involved a multivariable analysis that focused on the robot’s workspace, kinematic singularity, and dexterity to locate high stiffness areas and postures. The joint stiffness modelling applied the Virtual Joint Method (VJM), which replaced the complicated mechanical robot joints with one-dimensional (1-D) springs. The effects of stress and deflection are linearly related; the highest stress in a robot’s structure is distributed to the higher load-bearing elements such as the robot joints, end-effector, and tool. Therefore, by locating optimal postures, the induced stresses can be better regulated throughout the robot’s structure, thereby reducing resonant vibrations of the system and improving process accuracy and repeatability. These aspects are quantifiably pitched in terms of the magnitude differences in the end-effector deflection. The unique combination of the dexterity and the stiffness analyses aimed to provide roboticists and manufacturers with an easy and systematic solution to improve the stiffness, accuracy, and repeatability of their serial robots. A simple, user-friendly and cost-effective alternative to deflection measurements using accelerometers is provided, which offers an alternative to laser tracking devices that are commonly used for studies of this nature. The first investigation focused on identifying the overall workspace of the Fanuc M-10iA robot. The reachable workspace was investigated to understand the functionality and potential of the Fanuc robot. Most robotic studies stem from analysing the workspace since the workspace is a governing factor of the manipulator and end-effector placement, and its operations, in a manufacturing setting. The second investigation looked at identifying non-reachable areas and points surrounding the robot. This analysis, along with the workspace examination, provided a conclusive testing platform to test the dexterity and stiffness methodologies. Although the research focused on fixing the end-effector at a point (static case), the testing platform was structured precisely to cater for all robotic manufacturing tasks that are subjected to high applied forces and vibrations. Such tasks include, but are not limited to, drilling, tapping, fastening, or welding, and some dynamic and hybrid manufacturing operations. The third investigation was the application of a dexterous study that applied an Inverse Kinematic (IK) method to localise multiple robot configurations about a user-defined point in space. This process was necessary since the study is based on a multi-point dexterous posture identification technique to improve the stiffness of Serial Kinematic Machines (SKMs). The stiffness at various points and configurations were tested, which provided a series of stiff and non-stiff areas and postures within the robot’s workspace. MATLAB®, a technical computing software, was used to model the workspace and singularity of the robot. The dexterity and stiffness analyses were numerically evaluated using Wolfram Mathematica. The multivariable analyses served to improve the accuracy of serial robots and promote their functionality towards high force application manufacturing tasks. Apart from the improved stiffness performance offered, the future benefit of the method could advance the longevity of the robot as well as minimise the regular robot maintenance that is often required due to excessive loading, stress, and strain on the robot motors, joints, and links

    Learning robotic milling strategies based on passive variable operational space interaction control

    Full text link
    This paper addresses the problem of robotic cutting during disassembly of products for materials separation and recycling. Waste handling applications differ from milling in manufacturing processes, as they engender considerable variety and uncertainty in the parameters (e.g. hardness) of materials which the robot must cut. To address this challenge, we propose a learning-based approach incorporating elements of interaction control, in which the robot can adapt key parameters, such as feed rate, depth of cut, and mechanical compliance during task execution. We show how a mathematical model of cutting mechanics, embedded in a simulation environment, can be used to rapidly train the system without needing large amounts of data from physical cutting trials. The simulation approach was validated on a real robot setup based on four case study materials with varying structural and mechanical properties. We demonstrate the proposed method minimises process force and path deviations to a level similar to offline optimal planning methods, while the average time to complete a cutting task is within 25% of the optimum, at the expense of reduced volume of material removed per pass. A key advantage of our approach over similar works is that no prior knowledge about the material is required.Comment: 15 pages, 14 figures, accepted for publication in IEEE Transactions on Automation Science and Engineering (T-ASE

    Kinematics and Robot Design II (KaRD2019) and III (KaRD2020)

    Get PDF
    This volume collects papers published in two Special Issues “Kinematics and Robot Design II, KaRD2019” (https://www.mdpi.com/journal/robotics/special_issues/KRD2019) and “Kinematics and Robot Design III, KaRD2020” (https://www.mdpi.com/journal/robotics/special_issues/KaRD2020), which are the second and third issues of the KaRD Special Issue series hosted by the open access journal robotics.The KaRD series is an open environment where researchers present their works and discuss all topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. It aims at being an established reference for researchers in the field as other serial international conferences/publications are. Even though the KaRD series publishes one Special Issue per year, all the received papers are peer-reviewed as soon as they are submitted and, if accepted, they are immediately published in MDPI Robotics. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”.KaRD2019 together with KaRD2020 received 22 papers and, after the peer-review process, accepted only 17 papers. The accepted papers cover problems related to theoretical/computational kinematics, to biomedical engineering and to other design/applicative aspects

    Reconfiguration and tool path planning of hexapod machine tools

    Get PDF
    Hexapod machine tools have the potential to achieve increased accuracy, speed, acceleration and rigidity over conventional machines, and are regarded by many researchers as the machine tools of the next generation. However, their small and complex workspace often limits the range of tasks they can perform, and their parallel structure raises many new issues preventing the direct use of conventional tool path planning methods. This dissertation presents an investigation of new reconfiguration and tool path planning methods for enhancing the ability of hexapods to adapt to workspace changes and assisting them in being integrated into the current manufacturing environments. A reconfiguration method which includes the consideration of foot-placement space (FPS) determination and placement parameter identification has been developed. Based on the desired workspace of a hexapod and the motion range of its leg modules, the FPS of a hexapod machine is defined and a construction method of the FPS is presented. An implementation algorithm for the construction method is developed. The equations for identifying the position and orientation of the base joints for the hexapod at a new location are formulated. For the position identification problem, an algorithm based on Dialytic Elimination is derived. Through examples, it is shown that the FPS determination method can provide feasible locations for the feet of the legs to realize the required workspace. It is also shown that these identification equations can be solved through a numerical approach or through Dialytic Elimination using symbolic manipulation. Three dissimilarities between hexapods and five-axis machines are identified and studied to enhance the basic understanding of tool path planning for hexapods. The first significant difference is the existence of an extra degree of freedom (γ angle). The second dissimilarity is that a hexapod has a widely varying inverse Jacobian over the workspace. This leads to the result that a hexapod usually has a nonlinear path when following a straight-line segment over two sampled poses. These factors indicate that the traditional path planning methods should not be used for hexapods without modification. A kinematics-based tool path planning method for hexapod machine tools is proposed to guide the part placement and the determination of γ angle. The algorithms to search for the feasible part locations and γ sets are presented. Three local planning methods for the γ angle are described. It is demonstrated that the method is feasible and is effective in enhancing the performance of the hexapod machine. As the nonlinear error is computationally expensive to evaluate in real time, the measurement of total leg length error is proposed. This measure is proved to be effective in controlling the nonlinear error
    corecore