909 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
Multiple-Symbol Differential Sphere Detection Aided Successive Relaying in the Cooperative DS-CDMA Uplink
The conventional amplify-and-forward cooperative system is capable of achieving a superior performance with the aid of Multiple-Symbol Differential Sphere Detection (MSDSD), when compared to conventional differential detection (CDD) for transmission over time-selective channels. However, the conventional broadcast/cooperative twin-phase based relaying protocol encounters a 50% throughput loss imposed by half-duplex relaying. For combating this problem, in this paper, we create a MSDSD aided successive relaying based cooperative DS-CDMA system. We demonstrate that given the target BER of 10?4 , a diversity gain of up to 10 dB is achieved over the benchmark schemes employed without a throughput loss
A virtual MIMO dual-hop architecture based on hybrid spatial modulation
International audienceIn this paper, we propose a novel Virtual Multiple-Input-Multiple-Output (VMIMO) architecture based on the concept of Spatial Modulation (SM). Using a dual-hop and Decode-and-Forward protocol, we form a distributed system, called Dual-Hop Hybrid SM (DH-HSM). DH-HSM conveys information from a Source Node (SN) to a Destination Node (DN) via multiple Relay Nodes (RNs). The spatial position of the RNs is exploited for transferring information in addition to, or even without, a conventional symbol. In order to increase the performance of our architecture, while keeping the complexity of the RNs and DN low, we employ linear precoding using Channel State Information (CSI) at the SN. In this way, we form a Receive-Spatial Modulation (R-SM) pattern from the SN to the RNs, which is able to employ a centralized coordinated or a distributed uncoordinated detection algorithm at the RNs. In addition, we focus on the SN and propose two regularized linear precoding methods that employ realistic Imperfect Channel State Information at the Transmitter. The power of each precoder is analyzed theoretically. Using the Bit Error Rate (BER) metric, we evaluate our architecture against the following benchmark systems: 1) single relay; 2) best relay selection; 3) distributed Space Time Block Coding (STBC) VMIMO scheme; and 4) the direct communication link. We show that DH-HSM is able to achieve significant Signal-to-Noise Ratio (SNR) gains, which can be as high as 10.5 dB for a very large scale system setup. In order to verify our simulation results, we provide an analytical framework for the evaluation of the Average Bit Error Probability (ABEP)
MIMO Networks: the Effects of Interference
Multiple-input/multiple-output (MIMO) systems promise enormous capacity
increase and are being considered as one of the key technologies for future
wireless networks. However, the decrease in capacity due to the presence of
interferers in MIMO networks is not well understood. In this paper, we develop
an analytical framework to characterize the capacity of MIMO communication
systems in the presence of multiple MIMO co-channel interferers and noise. We
consider the situation in which transmitters have no information about the
channel and all links undergo Rayleigh fading. We first generalize the known
determinant representation of hypergeometric functions with matrix arguments to
the case when the argument matrices have eigenvalues of arbitrary multiplicity.
This enables the derivation of the distribution of the eigenvalues of Gaussian
quadratic forms and Wishart matrices with arbitrary correlation, with
application to both single user and multiuser MIMO systems. In particular, we
derive the ergodic mutual information for MIMO systems in the presence of
multiple MIMO interferers. Our analysis is valid for any number of interferers,
each with arbitrary number of antennas having possibly unequal power levels.
This framework, therefore, accommodates the study of distributed MIMO systems
and accounts for different positions of the MIMO interferers.Comment: Submitted to IEEE Trans. on Info. Theor
Técnicas de pré-codificação para sistemas multicelulares coordenados
Doutoramento em TelecomunicaçõesCoordenação Multicélula é um tópico de investigação em rápido
crescimento e uma solução promissora para controlar a interferência entre
células em sistemas celulares, melhorando a equidade do sistema e
aumentando a sua capacidade. Esta tecnologia já está em estudo no LTEAdvanced
sob o conceito de coordenação multiponto (COMP). Existem
várias abordagens sobre coordenação multicélula, dependendo da
quantidade e do tipo de informação partilhada pelas estações base, através
da rede de suporte (backhaul network), e do local onde essa informação é
processada, i.e., numa unidade de processamento central ou de uma forma
distribuída em cada estação base.
Nesta tese, são propostas técnicas de pré-codificação e alocação de
potência considerando várias estratégias: centralizada, todo o
processamento é feito na unidade de processamento central; semidistribuída,
neste caso apenas parte do processamento é executado na
unidade de processamento central, nomeadamente a potência alocada a
cada utilizador servido por cada estação base; e distribuída em que o
processamento é feito localmente em cada estação base. Os esquemas
propostos são projectados em duas fases: primeiro são propostas soluções
de pré-codificação para mitigar ou eliminar a interferência entre células,
de seguida o sistema é melhorado através do desenvolvimento de vários
esquemas de alocação de potência. São propostas três esquemas de
alocação de potência centralizada condicionada a cada estação base e com
diferentes relações entre desempenho e complexidade. São também
derivados esquemas de alocação distribuídos, assumindo que um sistema
multicelular pode ser visto como a sobreposição de vários sistemas com
uma única célula. Com base neste conceito foi definido uma taxa de erro
média virtual para cada um desses sistemas de célula única que compõem
o sistema multicelular, permitindo assim projectar esquemas de alocação
de potência completamente distribuídos.
Todos os esquemas propostos foram avaliados em cenários realistas,
bastante próximos dos considerados no LTE. Os resultados mostram que
os esquemas propostos são eficientes a remover a interferência entre
células e que o desempenho das técnicas de alocação de potência
propostas é claramente superior ao caso de não alocação de potência. O
desempenho dos sistemas completamente distribuídos é inferior aos
baseados num processamento centralizado, mas em contrapartida podem
ser usados em sistemas em que a rede de suporte não permita a troca de
grandes quantidades de informação.Multicell coordination is a promising solution for cellular wireless systems
to mitigate inter-cell interference, improving system fairness and
increasing capacity and thus is already under study in LTE-A under the
coordinated multipoint (CoMP) concept. There are several coordinated
transmission approaches depending on the amount of information shared
by the transmitters through the backhaul network and where the
processing takes place i.e. in a central processing unit or in a distributed
way on each base station.
In this thesis, we propose joint precoding and power allocation techniques
considering different strategies: Full-centralized, where all the processing
takes place at the central unit; Semi-distributed, in this case only some
process related with power allocation is done at the central unit; and Fulldistributed,
where all the processing is done locally at each base station.
The methods are designed in two phases: first the inter-cell interference is
removed by applying a set of centralized or distributed precoding vectors;
then the system is further optimized by centralized or distributed power
allocation schemes. Three centralized power allocation algorithms with
per-BS power constraint and different complexity tradeoffs are proposed.
Also distributed power allocation schemes are proposed by considering
the multicell system as superposition of single cell systems, where we
define the average virtual bit error rate (BER) of interference-free single
cell system, allowing us to compute the power allocation coefficients in a
distributed manner at each BS.
All proposed schemes are evaluated in realistic scenarios considering LTE
specifications. The numerical evaluations show that the proposed schemes
are efficient in removing inter-cell interference and improve system
performance comparing to equal power allocation. Furthermore, fulldistributed
schemes can be used when the amounts of information to be
exchanged over the backhaul is restricted, although system performance is
slightly degraded from semi-distributed and full-centralized schemes, but
the complexity is considerably lower. Besides that for high degrees of
freedom distributed schemes show similar behaviour to centralized ones
Distributed Quasi-Orthogonal Space-Time coding in wireless cooperative relay networks
Cooperative diversity provides a new paradigm in robust wireless re- lay networks that leverages Space-Time (ST) processing techniques to combat the effects of fading. Distributing the encoding over multiple relays that potentially observe uncorrelated channels to a destination terminal has demonstrated promising results in extending range, data- rates and transmit power utilization. Specifically, Space Time Block Codes (STBCs) based on orthogonal designs have proven extremely popular at exploiting spatial diversity through simple distributed pro- cessing without channel knowledge at the relaying terminals. This thesis aims at extending further the extensive design and analysis in relay networks based on orthogonal designs in the context of Quasi- Orthogonal Space Time Block Codes (QOSTBCs).
The characterization of Quasi-Orthogonal MIMO channels for cooper- ative networks is performed under Ergodic and Non-Ergodic channel conditions. Specific to cooperative diversity, the sub-channels are as- sumed to observe different shadowing conditions as opposed to the traditional co-located communication system. Under Ergodic chan- nel assumptions novel closed-form solutions for cooperative channel capacity under the constraint of distributed-QOSTBC processing are presented. This analysis is extended to yield closed-form approx- imate expressions and their utility is verified through simulations. The effective use of partial feedback to orthogonalize the QOSTBC is examined and significant gains under specific channel conditions are demonstrated.
Distributed systems cooperating over the network introduce chal- lenges in synchronization. Without extensive network management
it is difficult to synchronize all the nodes participating in the relaying between source and destination terminals. Based on QOSTBC tech- niques simple encoding strategies are introduced that provide compa- rable throughput to schemes under synchronous conditions with neg- ligible overhead in processing throughout the protocol. Both mutli- carrier and single-carrier schemes are developed to enable the flexi- bility to limit Peak-to-Average-Power-Ratio (PAPR) and reduce the Radio Frequency (RF) requirements of the relaying terminals.
The insights gained in asynchronous design in flat-fading cooperative channels are then extended to broadband networks over frequency- selective channels where the novel application of QOSTBCs are used in distributed-Space-Time-Frequency (STF) coding. Specifically, cod- ing schemes are presented that extract both spatial and mutli-path diversity offered by the cooperative Multiple-Input Multiple-Output (MIMO) channel. To provide maximum flexibility the proposed schemes are adapted to facilitate both Decode-and-Forward (DF) and Amplify- and-Forward (AF) relaying. In-depth Pairwise-Error-Probability (PEP) analysis provides distinct design specifications which tailor the distributed- STF code to maximize the diversity and coding gain offered under the
DF and AF protocols.
Numerical simulation are used extensively to confirm the validity of the proposed cooperative schemes. The analytical and numerical re- sults demonstrate the effective use of QOSTBC over orthogonal tech- niques in a wide range of channel conditions
- …