Controller-observer design and dynamic parameter identification for model-based control of an electromechanical lower-limb rehabilitation system

[EN] Rehabilitation is a hazardous task for a mechanical system, since the device has to interact with the human extremities without the hands-on experience the physiotherapist acquires over time. A gap needs to be filled in terms of designing effective controllers for this type of devices. In this respect, the paper describes the design of a model-based control for an electromechanical lower-limb rehabilitation system based on a parallel kinematic mechanism. A controller-observer was designed for estimating joint velocities, which are then used in a hybrid position/force control scheme. The model parameters are identified by customising an approach based on identifying only the relevant system dynamics parameters. Findings obtained through simulations show evidence of improvement in tracking performance compared with those where the velocity was estimated by numerical differentiation. The controller is also implemented in an actual electromechanical system for lower-limb rehabilitation tasks. Findings based on rehabilitation tasks confirm the findings from simulations.This work was partially financed by the Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDERCICYT) under the project DPI2013-44227-R and by the Instituto U. de Automatica e Informatica Industrial (ai2) of the Universitat Politecnica de Valencia.Valera Fernández, Á.; Díaz-Rodríguez, M.; Vallés Miquel, M.; Oliver, E.; Mata Amela, V.; Page Del Pozo, AF. (2017). Controller-observer design and dynamic parameter identification for model-based control of an electromechanical lower-limb rehabilitation system. International Journal of Control. 90(4):702-714. https://doi.org/10.1080/00207179.2016.1215529S702714904Åström, K. J., & Murray, R. M. (2010). Feedback Systems. doi:10.2307/j.ctvcm4gdkAtkeson, C. G., An, C. H., & Hollerbach, J. M. (1986). Estimation of Inertial Parameters of Manipulator Loads and Links. The International Journal of Robotics Research, 5(3), 101-119. doi:10.1177/027836498600500306Chia Bejarano, N., Maggioni, S., De Rijcke, L., Cifuentes, C. A., & Reinkensmeyer, D. J. (2015). Robot-Assisted Rehabilitation Therapy: Recovery Mechanisms and Their Implications for Machine Design. Emerging Therapies in Neurorehabilitation II, 197-223. doi:10.1007/978-3-319-24901-8_8Berghuis, H., & Nijmeijer, H. (1993). A passivity approach to controller-observer design for robots. IEEE Transactions on Robotics and Automation, 9(6), 740-754. doi:10.1109/70.265918Briot, S., & Gautier, M. (2013). Global identification of joint drive gains and dynamic parameters of parallel robots. Multibody System Dynamics, 33(1), 3-26. doi:10.1007/s11044-013-9403-6Canudas de Wit, C., & Fixot, N. (1991). Robot control via robust estimated state feedback. IEEE Transactions on Automatic Control, 36(12), 1497-1501. doi:10.1109/9.106170Canudas de Wit, C., & Slotine, J.-J. E. (1991). Sliding observers for robot manipulators. Automatica, 27(5), 859-864. doi:10.1016/0005-1098(91)90041-yCao, J., Xie, S. Q., Das, R., & Zhu, G. L. (2014). Control strategies for effective robot assisted gait rehabilitation: The state of art and future prospects. Medical Engineering & Physics, 36(12), 1555-1566. doi:10.1016/j.medengphy.2014.08.005Carretero, J. A., Podhorodeski, R. P., Nahon, M. A., & Gosselin, C. M. (1999). Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator. Journal of Mechanical Design, 122(1), 17-24. doi:10.1115/1.533542Cazalilla, J., Vallés, M., Mata, V., Díaz-Rodríguez, M., & Valera, A. (2014). Adaptive control of a 3-DOF parallel manipulator considering payload handling and relevant parameter models. Robotics and Computer-Integrated Manufacturing, 30(5), 468-477. doi:10.1016/j.rcim.2014.02.003De Jalon, J.G. & Bayo, E. (1994). Kinematic and dynamic simulation of multibody systems: the real-time challenge. New York: Springer Verlag.Díaz, I., Gil, J. J., & Sánchez, E. (2011). Lower-Limb Robotic Rehabilitation: Literature Review and Challenges. Journal of Robotics, 2011, 1-11. doi:10.1155/2011/759764Díaz-Rodríguez, M., Iriarte, X., Mata, V., & Ros, J. (2009). On the Experiment Design for Direct Dynamic Parameter Identification of Parallel Robots. Advanced Robotics, 23(3), 329-348. doi:10.1163/156855308x397550Díaz-Rodríguez, M., Mata, V., Valera, Á., & Page, Á. (2010). A methodology for dynamic parameters identification of 3-DOF parallel robots in terms of relevant parameters. Mechanism and Machine Theory, 45(9), 1337-1356. doi:10.1016/j.mechmachtheory.2010.04.007Gautier, M. (1991). Numerical calculation of the base inertial parameters of robots. Journal of Robotic Systems, 8(4), 485-506. doi:10.1002/rob.4620080405Gautier, M., & Khalil, W. (s. f.). On the identification of the inertial parameters of robots. Proceedings of the 27th IEEE Conference on Decision and Control. doi:10.1109/cdc.1988.194738Jamwal, P. K., Hussain, S., & Xie, S. Q. (2013). Review on design and control aspects of ankle rehabilitation robots. Disability and Rehabilitation: Assistive Technology, 10(2), 93-101. doi:10.3109/17483107.2013.866986Janabi-Sharifi, F., Hayward, V., & Chen, C.-S. J. (2000). Discrete-time adaptive windowing for velocity estimation. IEEE Transactions on Control Systems Technology, 8(6), 1003-1009. doi:10.1109/87.880606Janot, A., Gautier, M., Jubien, A., & Vandanjon, P. O. (2014). Comparison Between the CLOE Method and the DIDIM Method for Robots Identification. IEEE Transactions on Control Systems Technology, 22(5), 1935-1941. doi:10.1109/tcst.2014.2299544Janot, A., Vandanjon, P.-O., & Gautier, M. (2016). A revised Durbin-Wu-Hausman test for industrial robot identification. Control Engineering Practice, 48, 52-62. doi:10.1016/j.conengprac.2015.12.017Jiménez-Fabián, R., & Verlinden, O. (2012). Review of control algorithms for robotic ankle systems in lower-limb orthoses, prostheses, and exoskeletons. Medical Engineering & Physics, 34(4), 397-408. doi:10.1016/j.medengphy.2011.11.018Khalil, W., Vijayalingam, A., Khomutenko, B., Mukhanov, I., Lemoine, P., & Ecorchard, G. (2014). OpenSYMORO: An open-source software package for symbolic modelling of robots. 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. doi:10.1109/aim.2014.6878246Marchal-Crespo, L., & Reinkensmeyer, D. J. (2009). Review of control strategies for robotic movement training after neurologic injury. Journal of NeuroEngineering and Rehabilitation, 6(1). doi:10.1186/1743-0003-6-20Meng, W., Liu, Q., Zhou, Z., Ai, Q., Sheng, B., & Xie, S. (Shane). (2015). Recent development of mechanisms and control strategies for robot-assisted lower limb rehabilitation. Mechatronics, 31, 132-145. doi:10.1016/j.mechatronics.2015.04.005Page, A., Candelas, P., & Belmar, F. (2006). On the use of local fitting techniques for the analysis of physical dynamic systems. European Journal of Physics, 27(2), 273-279. doi:10.1088/0143-0807/27/2/010Raibert, M. H., & Craig, J. J. (1981). Hybrid Position/Force Control of Manipulators. Journal of Dynamic Systems, Measurement, and Control, 103(2), 126-133. doi:10.1115/1.3139652Ramsay, J. O., & Silverman, B. W. (2005). Functional Data Analysis. Springer Series in Statistics. doi:10.1007/b98888Saglia, J. A., Tsagarakis, N. G., Dai, J. S., & Caldwell, D. G. (2013). Control Strategies for Patient-Assisted Training Using the Ankle Rehabilitation Robot (ARBOT). IEEE/ASME Transactions on Mechatronics, 18(6), 1799-1808. doi:10.1109/tmech.2012.2214228Vallés, M., Cazalilla, J., Valera, Á., Mata, V., Page, Á., & Díaz-Rodríguez, M. (2015). A 3-PRS parallel manipulator for ankle rehabilitation: towards a low-cost robotic rehabilitation. Robotica, 35(10), 1939-1957. doi:10.1017/s0263574715000120Vallés, M., Cazalilla, J. I., Valera, Á., Mata, V., & Page, Á. (2013). Implementación basada en el middleware OROCOS de controladores dinámicos pasivos para un robot paralelo. Revista Iberoamericana de Automática e Informática Industrial RIAI, 10(1), 96-103. doi:10.1016/j.riai.2012.11.009Vallés, M., Díaz-Rodríguez, M., Valera, Á., Mata, V., & Page, Á. (2012). Mechatronic Development and Dynamic Control of a 3-DOF Parallel Manipulator. Mechanics Based Design of Structures and Machines, 40(4), 434-452. doi:10.1080/15397734.2012.687292Wu, F. X., Zhang, W. J., Li, Q., & Ouyang, P. R. (2002). Integrated Design and PD Control of High-Speed Closed-loop Mechanisms. Journal of Dynamic Systems, Measurement, and Control, 124(4), 522-528. doi:10.1115/1.1513179Yang, C., Huang, Q., & Han, J. (2012). Decoupling control for spatial six-degree-of-freedom electro-hydraulic parallel robot. Robotics and Computer-Integrated Manufacturing, 28(1), 14-23. doi:10.1016/j.rcim.2011.06.002Yoon, J., Ryu, J., & Lim, K.-B. (2006). Reconfigurable ankle rehabilitation robot for various exercises. Journal of Robotic Systems, 22(S1), S15-S33. doi:10.1002/rob.2015

Active exoskeleton control systems: State of the art

To get a compliant active exoskeleton controller, the force interaction controllers are mostly used in form of either the impedance or admittance controllers. The impedance or admittance controllers can only work if they are followed by either the force or the position controller respectively. These combinations place the impedance or admittance controller as high-level controller while the force or position controller as low-level controller. From the application point of view, the exoskeleton controllers are equipped by task controllers that can be formed in several ways depend on the aims. This paper presents the review of the control systems in the existing active exoskeleton in the last decade. The exoskeleton control system can be categorized according to the model system, the physical parameters, the hierarchy and the usage. These considerations give different control schemes. The main consideration of exoskeleton control design is how to achieve the best control performances. However, stability and safety are other important issues that have to be considered. © 2012 The Authors

Upper limb electrical stimulation using input-output linearization and iterative learning control

A control scheme is developed for multi-joint upper limb reference tracking using functional electrical stimulation (FES). In accordance with the needs of stroke rehabilitation, FES is applied to a reduced set of muscles in the arm and shoulder, with support against gravity provided by a passive exoskeletal mechanism. The approach fuses input-output linearization with iterative learning control (ILC), one of the few techniques to have been applied in clinical treatment trials with patients. This powerful hybrid control structure hence extends performance and scope of clinically proven technology for widespread application in rehabilitation robotic and FES domains. In addition to simplifying tracking and convergence properties of the stimulated joints, the framework enables conditions for the stability of unstimulated joints to be derived for the first time. Experimental results confirm tracking performance of the stimulated joints, together with unstimulated joint stability

Automatic Electromechanical Perturbator for Postural Control Analysis Based on Model Predictive Control

Objective clinical analyses are required to evaluate balance control performance. To this outcome, it is relevant to study experimental protocols and to develop devices that can provide reliable information about the ability of a subject to maintain balance. Whereas most of the applications available in the literature and on the market involve shifting and tilting of the base of support, the system presented in this paper is based on the direct application of an impulsive (short-lasting) force by means of an electromechanical device (named automatic perturbator). The control of such stimulation is rather complex since it requires high dynamics and accuracy. Moreover, the occurrence of several non-linearities, mainly related to the human–machine interaction, signals the necessity for robust control in order to achieve the essential repeatability and reliability. A linear electric motor, in combination with Model Predictive Control, was used to develop an automatic perturbator prototype. A test bench, supported by model simulations, was developed to test the architecture of the perturbation device. The performance of the control logic has been optimized by iterative tuning of the controller parameters, and the resulting behavior of the automatic perturbator is presented

Nonlinear Model-Based Control for Neuromuscular Electrical Stimulation

Neuromuscular electrical stimulation (NMES) is a technology where skeletal muscles are externally stimulated by electrodes to help restore functionality to human limbs with motor neuron disorder. This dissertation is concerned with the model-based feedback control of the NMES quadriceps muscle group-knee joint dynamics. A class of nonlinear controllers is presented based on various levels of model structures and uncertainties. The two main control techniques used throughout this work are backstepping control and Lyapunov stability theory. In the first control strategy, we design a model-based nonlinear control law for the system with the exactly known passive mechanical that ensures asymptotical tracking. This first design is used as a stepping stone for the other control strategies in which we consider that uncertainties exist. In the next four control strategies, techniques for adaptive control of nonlinearly parameterized systems are applied to handle the unknown physical constant parameters that appear nonlinearly in the model. By exploiting the Lipschitzian nature or the concavity/convexity of the nonlinearly parameterized functions in the model, we design two adaptive controllers and two robust adaptive controllers that ensure practical tracking. The next set of controllers are based on a NMES model that includes the uncertain muscle contractile mechanics. In this case, neural network-based controllers are designed to deal with this uncertainty. We consider here voltage inputs without and with saturation. For the latter, the Nussbaum gain is applied to handle the input saturation. The last two control strategies are based on a more refined NMES model that accounts for the muscle activation dynamics. The main challenge here is that the activation state is unmeasurable. In the first design, we design a model-based observer that directly estimates the unmeasured state for a certain activation model. The second design introduces a nonlinear filter with an adaptive control law to handle parametric uncertainty in the activation dynamics. Both the observer- and filter-based, partial-state feedback controllers ensure asymptotical tracking. Throughout this dissertation, the performance of the proposed control schemes are illustrated via computer simulations

Robust Model Predictive Control of An Input Delayed Functional Electrical Stimulation

Functional electrical stimulation (FES) is an external application of low-level currents to elicit muscle contractions that can potentially restore limb function in persons with spinal cord injury. However, FES often leads to the rapid onset of muscle fatigue, which limits performance of FES-based devices due to reduction in force generation capability. Fatigue is caused by unnatural muscle recruitment and synchronous and repetitive recruitment of muscle fibers. In this situation, overstimulation of the muscle fibers further aggravates the muscle fatigue. Therefore, a motivation exists to use optimal controls that minimize muscle stimulation while providing a desired performance. Model predictive controller (MPC) is one such optimal control method. However, the traditional MPC is dependent on exact model knowledge of the musculoskeletal dynamics and cannot handle modeling uncertainties. Motivated to address modeling uncertainties, robust MPC approach is used to control FES. Moreover, two new robust MPC techniques are studied to address electromechanical delay (EMD) during FES, which often causes performance issues and stability problems. This thesis compares two types of robust MPCs: a Lyapunov-based MPC and a tube- based MPC for controlling knee extension elicited through FES. Lyapunov-based MPC incorporated a contractive constraint that bounds the Lyapunov function of the MPC with a Lyapunov function that was used to derive an EMD compensation control law. The Lyapunov-based MPC was simulated to validate its performance. In the tube-based MPC, the EMD compensation controller was chosen to be the tube that eliminated output of the nominal MPC and the output of the real system. Regulation experiments were performed for the tube-based MPC on a leg extension machine and the controller showed robust performance despite modeling uncertainties

Robust Model Predictive Control of An Input Delayed Functional Electrical Stimulation

Functional electrical stimulation (FES) is an external application of low-level currents to elicit muscle contractions that can potentially restore limb function in persons with spinal cord injury. However, FES often leads to the rapid onset of muscle fatigue, which limits performance of FES-based devices due to reduction in force generation capability. Fatigue is caused by unnatural muscle recruitment and synchronous and repetitive recruitment of muscle fibers. In this situation, overstimulation of the muscle fibers further aggravates the muscle fatigue. Therefore, a motivation exists to use optimal controls that minimize muscle stimulation while providing a desired performance. Model predictive controller (MPC) is one such optimal control method. However, the traditional MPC is dependent on exact model knowledge of the musculoskeletal dynamics and cannot handle modeling uncertainties. Motivated to address modeling uncertainties, robust MPC approach is used to control FES. Moreover, two new robust MPC techniques are studied to address electromechanical delay (EMD) during FES, which often causes performance issues and stability problems. This thesis compares two types of robust MPCs: a Lyapunov-based MPC and a tube- based MPC for controlling knee extension elicited through FES. Lyapunov-based MPC incorporated a contractive constraint that bounds the Lyapunov function of the MPC with a Lyapunov function that was used to derive an EMD compensation control law. The Lyapunov-based MPC was simulated to validate its performance. In the tube-based MPC, the EMD compensation controller was chosen to be the tube that eliminated output of the nominal MPC and the output of the real system. Regulation experiments were performed for the tube-based MPC on a leg extension machine and the controller showed robust performance despite modeling uncertainties

Optimization of Sliding Mode Control using Particle Swarm Algorithm for an Electro-hydraulic Actuator System

The dynamic parts of electro-hydraulic actuator (EHA) system are widely applied in the industrial field for the process that exposed to the motion control. In order to achieve accurate motion produced by these dynamic parts, an appropriate controller will be needed. However, the EHA system is well known to be nonlinear in nature. A great challenge is carried out in the EHA system modelling and the controller development due to its nonlinear characteristic and system complexity. An appropriate controller with proper controller parameters will be needed in order to maintain or enhance the performance of the utilized controller. This paper presents the optimization on the variables of sliding mode control (SMC) by using Particle Swarm Optimization (PSO) algorithm. The control scheme is established from the derived dynamic equation which stability is proven through Lyapunov theorem. From the obtained simulation results, it can be clearly inferred that the SMC controller variables tuning through PSO algorithm performed better compared with the conventional proportionalintegral-derivative (PID) controller

Dynamic manipulation of pneumatically controlled soft finger for home automation

Soft robots have the advantage of inherent flexibility, adaptability, compliance, and safety in human interaction, and therefore attracted significant research attention in recent years. They have found interesting applications in industrial automation where soft robotic hands are fitted as end-effector on traditional rigid robotic arms to handle delicate objects. Their inherent compliance with the shape of the object reduces the complexity of sensing and actuation mechanisms required for the safe operation of traditional robotic hands. They also have the potential application in the home automation, since the operation of robots in indoor environment impose a stringent requirement on safety and compliant design. Despite this, the dynamic manipulation of soft robots remains challenging because their inherent flexibility makes their mathematical model highly nonlinear. Existing works either use model-free control, e.g., PID, which owing to its general formulation, does not account for the peculiarity of soft robots, or they use the Finite-Element-Method based approach, which, apart from being computationally expensive, requires an exact model of the soft robots. In this paper, we take a holistic approach by first developing a low-order approximate mathematical model for computational efficiency and then adding a feedback loop using an inverse dynamics controller to compensate for modeling errors. Theoretical analysis is presented to prove the convergence and stability of the proposed controller. Extensive experimental and comparison results also prove the superiority of the proposed controller over other algorithms