Sliding Mode Control With PID Sliding Surface for Active Vibration Damping of Pneumatically Actuated Soft Robots

This paper proposes a novel active vibration damping mechanism for soft robots. In recent years, soft robots have gained increasing research attention for robotic researchers and industrial developers alike. Soft robots offer a significant number of advantages when it comes to the handling of fragile objects, clinical rehabilitation tasks, and human-machine interaction. Soft robots demonstrate a high degree of compliance and safety because of their inherent softness, achieving the same with rigid robots will require intricate controller design and sensing mechanisms. However, the most commonly used soft robots use pneumatic systems for actuation. These pneumatic soft robots undergo large amplitude vibrations when deactuated suddenly. These vibrations not only decrease the accuracy of these soft robots but also compromise their structural integrity, which results in a decrease in their useable lifespan. An active vibration damping mechanism is very much needed to increase the utility of soft robots in industrial applications. To accurately control the dynamic behavior of soft robots, we propose a sliding mode based controller with PID sliding surface. The proposed controller uses feedback error to define a PID sliding surface, and a nonlinear sliding mode controller works to keep the system attached to the sliding surface. The coefficients of the PID sliding surface determine the dynamic behavior of the soft robot. The performance of the proposed controller is verified by using a multi-chambered parallel soft robot. The experimental results demonstrate that the proposed controller can suppress vibration amplitude to a decidedly smaller range

Feedrate planning for machining with industrial six-axis robots

The authors want to thank Stäubli for providing the necessary information of the controller, Dynalog for its contribution to the experimental validations and X. Helle for its material contributions.Nowadays, the adaptation of industrial robots to carry out high-speed machining operations is strongly required by the manufacturing industry. This new technology machining process demands the improvement of the overall performances of robots to achieve an accuracy level close to that realized by machine-tools. This paper presents a method of trajectory planning adapted for continuous machining by robot. The methodology used is based on a parametric interpolation of the geometry in the operational space. FIR filters properties are exploited to generate the tool feedrate with limited jerk. This planning method is validated experimentally on an industrial robot

DESIGNING HEDGE ALGEBRAIC CONTROLLER AND OPTIMIZING BY GENETIC ALGORITHM FOR SERIAL ROBOTS ADHERING TRAJECTORIES

In recent years, the application of hedge algebras in the field of control has been studied. The results show that this approach has many advantages. In additions, industrial robots are being well-developed and extensively used, especially in the industrial revolution 4.0. Accurate control of industrial robots is a class of problems that many scientists are interested in. In this paper, we design a controller based on hedge algebra for serial robots. The control rule is given by linguistic rule base system. The goal is to accurately control the moving robot arm which adheres given trajectories. Optimization of fuzzy parameters for the controller is done by genetic algorithms. The system has been simulated on the Matlab-Simulink software. The simulation results show that the orbital deviation is very small. Moreover, the controller worked well with correct control quality. This result once presents the simplicity and efficiency of the hedge algebras approach to control

The WCSAR telerobotics test bed

Component technologies for use in telerobotic systems for space are being developed. As part of this effort, a test bed was established in which these technologies can be verified and integrated into telerobotic systems. The facility consists of two slave industrial robots, an articulated master arm controller, a cartesian coordinate master arm controller, and a variety of sensors, displays and stimulators for feedback to human operators. The controller of one of the slave robots remains in its commercial state, while the controller of the other robot has been replaced with a new controller that achieves high-performance in telerobotic operating modes. A dexterous slave hand which consists of two fingers and a thumb is being developed, along with a number of force-reflecting and non-force reflecting master hands, wrists and arms. A tactile sensing finger tip based on piezo-film technology has been developed, along with tactile stimulators and CAD-based displays for sensory feedback and sensory substitution. The telerobotics test bed and its component technologies are described, as well as the integration of these component technologies into telerobotic systems, and their performance in conjunction with human operators

General-purpose controller for industrial manipulators

The general-purpose controller for industrial robots of arbitrary type is described. It enables control of robots powered by DC electromotors or hydraulic actuators. The controller includes programs for communication with operators, robot program language, program for on-line robot kinematics, and program for direct digital servosystems for tracking trajectories including on-line dynamics of the robot. The controller is implemented on two microcomputers based on INTEL 8086 microprocessors. All parts of the controller hardware and software are briefly described. Implementation of on-line kinematics and on-line dynamics and the choice of the control law are considered in more details

Experimental comparison of dynamic tracking performanceof iGPS and laser tracker

External metrology systems are increasingly being integrated with traditional industrial articulated robots, especially in the aerospace industries, to improve their absolute accuracy for precision operations such as drilling, machining and jigless assembly. While currently most of the metrology assisted robotics control systems are limited in their position update rate, such that the robot has to be stopped in order to receive a metrology coordinate update, some recent efforts are addressed toward controlling robots using real-time metrology data. The indoor GPS is one of the metrology systems that may be used to provide real-time 6DOF data to a robot controller. Even if there is a noteworthy literature dealing with the evaluation of iGPS performance, there is, however, a lack of literature on how well the iGPS performs under dynamic conditions. This paper presents an experimental evaluation of the dynamic measurement performance of the iGPS, tracking the trajectories of an industrial robot. The same experiment is also repeated using a laser tracker. Besides the experiment results presented, this paper also proposes a novel method for dynamic repeatability comparisons of tracking instrument

A passivity approach to controller-observer design for robots

Passivity-based control methods for robots, which achieve the control objective by reshaping the robot system's natural energy via state feedback, have, from a practical point of view, some very attractive properties. However, the poor quality of velocity measurements may significantly deteriorate the control performance of these methods. In this paper the authors propose a design strategy that utilizes the passivity concept in order to develop combined controller-observer systems for robot motion control using position measurements only. To this end, first a desired energy function for the closed-loop system is introduced, and next the controller-observer combination is constructed such that the closed-loop system matches this energy function, whereas damping is included in the controller- observer system to assure asymptotic stability of the closed-loop system. A key point in this design strategy is a fine tuning of the controller and observer structure to each other, which provides solutions to the output-feedback robot control problem that are conceptually simple and easily implementable in industrial robot applications. Experimental tests on a two-DOF manipulator system illustrate that the proposed controller-observer systems enable the achievement of higher performance levels compared to the frequently used practice of numerical position differentiation for obtaining a velocity estimat

Position control of an industrial robot using an optical measurement system for machining purposes

A series of mechanical properties and disturbances limit the accuracy achievable in robotic applications. External control of the end effector position is commonly known as being an appropriate mean to increase accuracy. This paper presents an approach for position control of industrial robots using the pass-through between an industrial CNC and servomotors. A CNC-controlled robot is used together with an external optical measurement system to close the feedback loop of robot end effector and robot controller in order to improve robot accuracy. For short cycle times and implementation reasons a PLC is used for signal processing and control implementation. The relevance of the approach is outlined in experiments. The robot behaviour in free space motion and in machining application is analysed with the optical measurement system and a CMM