Control of a Lightweight Flexible Robotic Arm Using Sliding Modes

This paper presents a robust control scheme for flexible link robotic manipulators, which is based on considering the flexible mechanical structure as a system with slow (rigid) and fast (flexible) modes that can be controlled separately. The rigid dynamics is controlled by means of a robust sliding-mode approach with wellestablished stability properties while an LQR optimal design is adopted for the flexible dynamics. Experimental results show that this composite approach achieves good closed loop tracking properties both for the rigid and the flexible dynamics

High speed, precision motion strategies for lightweight structures

Research on space telerobotics is summarized. Adaptive control experiments on the Robotic Arm, Large and Flexible (RALF) were preformed and are documented, along with a joint controller design for the Small Articulated Manipulator (SAM), which is mounted on the RALF. A control algorithm is described as a robust decentralized adaptive control based on a bounded uncertainty approach. Dynamic interactions between SAM and RALF are examined. Unstability of the manipulator is studied from the perspective that the inertial forces generated could actually be used to more rapidly damp out the flexible manipulator's vibration. Currently being studied is the modeling of the constrained dynamics of flexible arms

Integral Resonant Control for vibration damping and precise tip-positioning of a single-link flexible manipulator

Peer reviewedPostprin

Dynamic modeling, property investigation, and adaptive controller design of serial robotic manipulators modeled with structural compliance

Research results on general serial robotic manipulators modeled with structural compliances are presented. Two compliant manipulator modeling approaches, distributed and lumped parameter models, are used in this study. System dynamic equations for both compliant models are derived by using the first and second order influence coefficients. Also, the properties of compliant manipulator system dynamics are investigated. One of the properties, which is defined as inaccessibility of vibratory modes, is shown to display a distinct character associated with compliant manipulators. This property indicates the impact of robot geometry on the control of structural oscillations. Example studies are provided to illustrate the physical interpretation of inaccessibility of vibratory modes. Two types of controllers are designed for compliant manipulators modeled by either lumped or distributed parameter techniques. In order to maintain the generality of the results, neither linearization is introduced. Example simulations are given to demonstrate the controller performance. The second type controller is also built for general serial robot arms and is adaptive in nature which can estimate uncertain payload parameters on-line and simultaneously maintain trajectory tracking properties. The relation between manipulator motion tracking capability and convergence of parameter estimation properties is discussed through example case studies. The effect of control input update delays on adaptive controller performance is also studied

Modeling and Control of Flexible Link Manipulators

Autonomous maritime navigation and offshore operations have gained wide attention with the aim of reducing operational costs and increasing reliability and safety. Offshore operations, such as wind farm inspection, sea farm cleaning, and ship mooring, could be carried out autonomously or semi-autonomously by mounting one or more long-reach robots on the ship/vessel. In addition to offshore applications, long-reach manipulators can be used in many other engineering applications such as construction automation, aerospace industry, and space research. Some applications require the design of long and slender mechanical structures, which possess some degrees of flexibility and deflections because of the material used and the length of the links. The link elasticity causes deflection leading to problems in precise position control of the end-effector. So, it is necessary to compensate for the deflection of the long-reach arm to fully utilize the long-reach lightweight flexible manipulators. This thesis aims at presenting a unified understanding of modeling, control, and application of long-reach flexible manipulators. State-of-the-art dynamic modeling techniques and control schemes of the flexible link manipulators (FLMs) are discussed along with their merits, limitations, and challenges. The kinematics and dynamics of a planar multi-link flexible manipulator are presented. The effects of robot configuration and payload on the mode shapes and eigenfrequencies of the flexible links are discussed. A method to estimate and compensate for the static deflection of the multi-link flexible manipulators under gravity is proposed and experimentally validated. The redundant degree of freedom of the planar multi-link flexible manipulator is exploited to minimize vibrations. The application of a long-reach arm in autonomous mooring operation based on sensor fusion using camera and light detection and ranging (LiDAR) data is proposed.publishedVersio

An efficient finite element formulation of dynamics for a flexible robot with different type of joints

If two adjacent links of a flexible robot are connected via a revolute joint or a fixed prismatic joint, the relative motion of the next link will depend on both the joint motion and the elastic displacement of the distal end of the previous link. However, if the two adjacent links are connected via a sliding prismatic joint, the relative motion of the next link will depend additionally on the elastic deformation distributed along the previous link. Therefore, formulation of the motion equations for a multi-link flexible robot consisting of the revolute joints, the fixed prismatic joints and the sliding prismatic joints is challenging. In this study, the finite element kinematic and dynamic formulation was successfully developed and validated for the flexible robot, in which a transformation matrix is proposed to describe the kinematics of both the joint motion and the link deformation. Additionally, a new recursive formulation of the dynamic equations is introduced. As compared with the previous methods, the time complexity of the formulation is reduced by O(2η), where η is the number of finite elements on all links. The numerical examples and experiments were implemented to validate the proposed kinematic and dynamic modelling method

Variable Structure and Ultimate Boundedness control and stabilization of flexible robotic systems

In this thesis we study the control of two link light weight elastic manipulator in the presence of uncertainty. The control of flexible robotic arm with uncertainty such as variable payload, joint angle frictional torque etc., is an interesting and important problem; Here we consider control of joint angles and stabilization of the flexible modes caused by the manuever of robotic arm by two methods. These are: (i) Variable Structure control and (ii) Nonlinear Ultimate Boundedness control. Nonlinear Ultimate Boundedness control is a continuous control wherein the joint angle tracking error is uniformly ultimately bounded in the closed-loop system; Analytical derivations of these two schemes are presented. A control logic is included which switches the stabilizer when the joint angle trajectory enters a specified neighborhood of the terminal state; Extensive simulations were carried out for several conditions of uncertainty and the results are presented. (Abstract shortened with permission of author.)

A review of aerial manipulation of small-scale rotorcraft unmanned robotic systems

Small-scale rotorcraft unmanned robotic systems (SRURSs) are a kind of unmanned rotorcraft with manipulating devices. This review aims to provide an overview on aerial manipulation of SRURSs nowadays and promote relative research in the future. In the past decade, aerial manipulation of SRURSs has attracted the interest of researchers globally. This paper provides a literature review of the last 10 years (2008–2017) on SRURSs, and details achievements and challenges. Firstly, the definition, current state, development, classification, and challenges of SRURSs are introduced. Then, related papers are organized into two topical categories: mechanical structure design, and modeling and control. Following this, research groups involved in SRURS research and their major achievements are summarized and classified in the form of tables. The research groups are introduced in detail from seven parts. Finally, trends and challenges are compiled and presented to serve as a resource for researchers interested in aerial manipulation of SRURSs. The problem, trends, and challenges are described from three aspects. Conclusions of the paper are presented, and the future of SRURSs is discussed to enable further research interests

Working and Limitations of Cable Stiffening in Flexible Link Manipulators

Rigid link manipulators (RLMs) are used in industry to move and manipulate objects in their workspaces. Flexible link manipulators (FLMs), which are much lighter and hence highly flexible compared to RLMs, have been proposed in the past as means to reduce energy consumption and increase the speed of operation. Unlike RLM, an FLM has infinite degrees of freedom actuated by finite number of actuators. Due to high flexibility affecting the precision of operation, special control algorithms are required to make them usable. Recently, a method to stiffen FLMs using cables, without adding significant inertia or adversely affecting the advantages of FLMs, has been proposed as a possible solution in a preliminary work by the authors. An FLM stiffened using cables can use existing control algorithms designed for RLMs. In this paper we discuss in detail the working principle and limitations of cable stiffening for flexible link manipulators through simulations and experiments. A systematic way of deciding the location of cable attachments to the FLM is also presented. The main result of this paper is to show the advantage of adding a second pair of cables in reducing overall link deflections