Control speculation in multithreaded processors through dynamic loop detection

This paper presents a mechanism to dynamically detect the loops that are executed in a program. This technique detects the beginning and the termination of the iterations and executions of the loops without compiler/user intervention. We propose to apply this dynamic loop detection to the speculation of multiple threads of control dynamically obtained from a sequential program. Based an the highly predictable behavior of the loops, the history of the past executed loops is used to speculate the future instruction sequence. The overall objective is to dynamically obtain coarse grain parallelism (at the thread level) that can be exploited by a multithreaded architecture. We show that for a 4-context multithreaded processor the speculation mechanism provides around 2.6 concurrent threads in average.Peer ReviewedPostprint (published version

Architectural support for probabilistic branches

A plethora of research efforts have focused on fine-tuning branch predictors to increasingly higher levels of accuracy. However, several important optimization, financial, and statistical data analysis algorithms rely on probabilistic computation. These applications draw random values from a distribution and steer control flow based on those values. Such probabilistic branches are challenging to predict because of their inherent probabilistic nature. As a result, probabilistic codes significantly suffer from branch mispredictions. This paper proposes Probabilistic Branch Support (PBS), a hardware/software cooperative technique that leverages the observation that the outcome of probabilistic branches needs to be correct only in a statistical sense. PBS stores the outcome and the probabilistic values that lead to the outcome of the current execution to direct the next execution of the probabilistic branch, thereby completely removing the penalty for mispredicted probabilistic branches. PBS relies on marking probabilistic branches in software for hardware to exploit. Our evaluation shows that PBS improves MPKI by 45% on average (and up to 99%) and IPC by 6.7% (up to 17%) over the TAGE-SC-L predictor. PBS requires 193 bytes of hardware overhead and introduces statistically negligible algorithmic inaccuracy

Dynamic Task Prediction for an SpMT Architecture Based on Control Independence

Exploiting better performance from computer programs translates to finding more instructions to execute in parallel. Since most general purpose programs are written in an imperatively sequential manner, closely lying instructions are always data dependent, making the designer look far ahead into the program for parallelism. This necessitates wider superscalar processors with larger instruction windows. But superscalars suffer from three key limitations, their inability to scale, sequential fetch bottleneck and high branch misprediction penalty. Recent studies indicate that current superscalars have reached the end of the road and designers will have to look for newer ideas to build computer processors. Speculative Multithreading (SpMT) is one of the most recent techniques to exploit parallelism from applications. Most SpMT architectures partition a sequential program into multiple threads (or tasks) that can be concurrently executed on multiple processing units. It is desirable that these tasks are sufficiently distant from each other so as to facilitate parallelism. It is also desirable that these tasks are control independent of each other so that execution of a future task is guaranteed in case of local control flow misspeculations. Some task prediction mechanisms rely on the compiler requiring recompilation of programs. Current dynamic mechanisms either rely on program constructs like loop iterations and function and loop boundaries, resulting in unbalanced loads, or predict tasks which are too short to be of use in an SpMT architecture. This thesis is the first proposal of a predictor that dynamically predicts control independent tasks that are consistently wide apart, and executes them on a novel SpMT architecture

Control speculation in multithreaded processors through dynamic loop detection

This paper presents a mechanism to dynamically detect the loops that are executed in a program. This technique detects the beginning and the termination of the iterations and executions of the loops without compiler/user intervention. We propose to apply this dynamic loop detection to the speculation of multiple threads of control dynamically obtained from a sequential program. Based on the highly predictable behavior of the loops, the history of the past executed loops is used to speculate the future instruction sequence. The overall objective is to dynamically obtain coarse grain parallelism (at the thread level) that can be exploited by a multithreaded architecture. We show that for a 4-context multithreaded processor, the speculation mechanism provides around 2.6 concurrent threads in average. 1

Control speculation in multithreaded processors through dynamic loop detection

This paper presents a mechanism to dynamically detect the loops that are executed in a program. This technique detects the beginning and the termination of the iterations and executions of the loops without compiler/user intervention. We propose to apply this dynamic loop detection to the speculation of multiple threads of control dynamically obtained from a sequential program. Based an the highly predictable behavior of the loops, the history of the past executed loops is used to speculate the future instruction sequence. The overall objective is to dynamically obtain coarse grain parallelism (at the thread level) that can be exploited by a multithreaded architecture. We show that for a 4-context multithreaded processor the speculation mechanism provides around 2.6 concurrent threads in average.Peer Reviewe

Control Speculation in Multithreaded Processors through Dynamic Loop Detection

This paper presents a mechanism to dynamically detect the loops that are executed in a program. This technique detects the beginning and the termination of the iterations and executions of the loops without compiler/user intervention. We propose to apply this dynamic loop detection to the speculation of multiple threads of control dynamically obtained from a sequential program. Based on the highly predictable behavior of the loops, the history of the past executed loops is used to speculate the future dynamic instruction sequence. The overall objective is to dynamically obtain coarse grain parallelism (at the thread level) that can be exploited by a multithreaded architecture. We show that for a 4-context multithreaded processor, the speculation mechanism provides around 3 concurrent threads in average. Keywords: control speculation, multithreaded architectures, dynamic loop detection, instruction level parallelism. 1 INTRODUCTION Control speculation increases the potential paralleli..

Runahead threads

Los temas de investigación sobre multithreading han ganado mucho interés en la arquitectura de computadores con la aparición de procesadores multihilo y multinucleo. Los procesadores SMT (Simultaneous Multithreading) son uno de estos nuevos paradigmas, combinando la capacidad de emisión de múltiples instrucciones de los procesadores superscalares con la habilidad de explotar el paralelismo a nivel de hilos (TLP). Así, la principal característica de los procesadores SMT es ejecutar varios hilos al mismo tiempo para incrementar la utilización de las etapas del procesador mediante la compartición de recursos.Los recursos compartidos son el factor clave de los procesadores SMT, ya que esta característica conlleva tratar con importantes cuestiones pues los hilos también compiten por estos recursos en el núcleo del procesador. Si bien distintos grupos de aplicaciones se benefician de disponer de SMT, las diferentes propiedades de los hilos ejecutados pueden desbalancear la asignación de recursos entre los mismos, disminuyendo los beneficios de la ejecución multihilo. Por otro lado, el problema con la memoria está aún presente en los procesadores SMT. Estos procesadores alivian algunos de los problemas de latencia provocados por la lentitud de la memoria con respecto a la CPU. Sin embargo, hilos con grandes cargas de trabajo y con altas tasas de fallos en las caches son unas de las mayores dificultades de los procesadores SMT. Estos hilos intensivos en memoria tienden a crear importantes problemas por la contención de recursos. Por ejemplo, pueden llegar a bloquear recursos críticos debido a operaciones de larga latencia impidiendo no solo su ejecución, sino el progreso de la ejecución de los otros hilos y, por tanto, degradando el rendimiento general del sistema.El principal objetivo de esta tesis es aportar soluciones novedosas a estos problemas y que mejoren el rendimiento de los procesadores SMT. Para conseguirlo, proponemos los Runahead Threads (RaT) aplicando una ejecución especulativa basada en runahead. RaT es un mecanismo alternativo a las políticas previas de gestión de recursos las cuales usualmente restringían a los hilos intensivos en memoria para conseguir más productividad.La idea clave de RaT es transformar un hilo intensivo en memoria en un hilo ligero en el uso de recursos que progrese especulativamente. Así, cuando un hilo sufre de un acceso de larga latencia, RaT transforma dicho hilo en un hilo de runahead mientras dicho fallo está pendiente. Los principales beneficios de esta simple acción son varios. Mientras un hilo está en runahead, éste usa los diferentes recursos compartidos sin monopolizarlos o limitarlos con respecto a los otros hilos. Al mismo tiempo, esta ejecución especulativa realiza prebúsquedas a memoria que se solapan con el fallo principal, por tanto explotando el paralelismo a nivel de memoria y mejorando el rendimiento.RaT añade muy poco hardware extra y complejidad en los procesadores SMT con respecto a su implementación. A través de un mecanismo de checkpoint y lógica de control adicional, podemos dotar a los contextos hardware con la capacidad de ejecución en runahead. Por medio de RaT, contribuímos a aliviar simultaneamente dos problemas en el contexto de los procesadores SMT. Primero, RaT reduce el problema de los accesos de larga latencia en los SMT mediante el paralelismo a nivel de memoria (MLP). Un hilo prebusca datos en paralelo en vez de estar parado debido a un fallo de L2 mejorando su rendimiento individual. Segundo, RaT evita que los hilos bloqueen recursos bajo fallos de larga latencia. RaT asegura que el hilo intensivo en memoria recicle más rápido los recursos compartidos que usa debido a la naturaleza de la ejecución especulativa.La principal limitación de RaT es que los hilos especulativos pueden ejecutar instrucciones extras cuando no realizan prebúsqueda e innecesariamente consumir recursos de ejecución en el procesador SMT. Este inconveniente resulta en hilos de runahead ineficientes pues no contribuyen a la ganancia de rendimiento e incrementan el consumo de energía debido al número extra de instrucciones especulativas. Por consiguiente, en esta tesis también estudiamos diferentes soluciones dirigidas a solventar esta desventaja del mecanismo RaT. El resultado es un conjunto de soluciones complementarias para mejorar la eficiencia de RaT en términos de consumo de potencia y gasto energético.Por un lado, mejoramos la eficiencia de RaT aplicando ciertas técnicas basadas en el análisis semántico del código ejecutado por los hilos en runahead. Proponemos diferentes técnicas que analizan y controlan la utilidad de ciertos patrones de código durante la ejecución en runahead. Por medio de un análisis dinámico, los hilos en runahead supervisan la utilidad de ejecutar los bucles y subrutinas dependiendo de las oportunidades de prebúsqueda. Así, RaT decide cual de estas estructuras de programa ejecutar dependiendo de la información de utilidad obtenida, decidiendo entre parar o saltar el bucle o la subrutina para reducir el número de las instrucciones no útiles. Entre las técnicas propuestas, conseguimos reducir las instrucciones especulativas y la energía gastada mientras obtenemos rendimientos similares a la técnica RaT original.Por otro lado, también proponemos lo que denominamos hilos de runahead eficientes. Esta propuesta se basa en una técnica más fina que cubre todo el rango de ejecución en runahead, independientemente de las características del programa ejecutado. La idea principal es averiguar "cuando" y "durante cuanto" un hilo en runahead debe ser ejecutado prediciendo lo que denominamos distancia útil de runahead. Los resultados muestran que la mejor de estas propuestas basadas en la predicción de la distancia de runahead reducen significativamente el número de instrucciones extras así como también el consumo de potencia. Asimismo, conseguimos mantener los beneficios de rendimiento de los hilos en runahead, mejorando de esta forma la eficiencia energética de los procesadores SMT usando el mecanismo RaT.La evolución de RaT desarrollada durante toda esta investigación nos proporciona no sólo una propuesta orientada a un mayor rendimiento sino también una forma eficiente de usar los recursos compartidos en los procesadores SMT en presencia de operaciones de memoria de larga latencia.Dado que los diseños SMT en el futuro estarán orientados a optimizar una combinación de rendimiento individual en las aplicaciones, la productividad y el consumo de energía, los mecanismos basados en RaT aquí propuestos son interesantes opciones que proporcionan un mejor balance de rendimiento y energía que las propuestas previas en esta área.Research on multithreading topics has gained a lot of interest in the computer architecture community due to new commercial multithreaded and multicore processors. Simultaneous Multithreading (SMT) is one of these relatively new paradigms, which combines the multiple instruction issue features of superscalar processors with the ability of multithreaded architectures to exploit thread level parallelism (TLP). The main feature of SMT processors is to execute multiple threads that increase the utilization of the pipeline by sharing many more resources than in other types of processors.Shared resources are the key of simultaneous multithreading, what makes the technique worthwhile.This feature also entails important challenges to deal with because threads also compete for resources in the processor core. On the one hand, although certain types and mixes of applications truly benefit from SMT, the different features of threads can unbalance the resource allocation among threads, diminishing the benefit of multithreaded execution. On the other hand, the memory wall problem is still present in these processors. SMT processors alleviate some of the latency problems arisen by main memory's slowness relative to the CPUs. Nevertheless, threads with high cache miss rates that use large working sets are one of the major pitfalls of SMT processors. These memory intensive threads tend to use processor and memory resources poorly creating the highest resource contention problems. Memory intensive threads can clog up shared resources due to long latency memory operations without making progress on a SMT processor, thereby hindering overall system performance.The main goal of this thesis is to alleviate these shortcomings on SMT scenarios. To accomplish this, the key contribution of this thesis is the application of the paradigm of Runahead execution in the design of multithreaded processors by Runahead Threads (RaT). RaT shows to be a promising alternative to prior SMT resource management mechanisms which usually restrict memory bound threads in order to get higher throughputs.The idea of RaT is to transform a memory intensive thread into a light-consumer resource thread by allowing that thread to progress speculatively. Therefore, as soon as a thread undergoes a long latency load, RaT transforms the thread to a runahead thread while it has that long latency miss outstanding. The main benefits of this simple action performed by RaT are twofold. While being a runahead thread, this thread uses the different shared resources without monopolizing or limiting the available resources for other threads. At the same time, this fast speculative thread issues prefetches that overlap other memory accesses with the main miss, thereby exploiting the memory level parallelism.Regarding implementation issues, RaT adds very little extra hardware cost and complexity to an existing SMT processor. Through a simple checkpoint mechanism and little additional control logic, we can equip the hardware contexts with the runahead thread capability. Therefore, by means of runahead threads, we contribute to alleviate simultaneously the two shortcomings in the context of SMT processor improving the performance. First, RaT alleviates the long latency load problem on SMT processors by exposing memory level parallelism (MLP). A thread prefetches data in parallel (if MLP is available) improving its individual performance rather than be stalled on an L2 miss. Second, RaT prevents threads from clogging resources on long latency loads. RaT ensures that the L2-missing thread recycles faster the shared resources it uses by the nature of runahead speculative execution. This avoids memory intensive threads clogging the important processor resources up.The main limitation of RaT though is that runahead threads can execute useless instructions and unnecessarily consume execution resources on the SMT processor when there is no prefetching to be exploited. This drawback results in inefficient runahead threads which do not contribute to the performance gain and increase dynamic energy consumption due to the number of extra speculatively executed instructions. Therefore, we also propose different solutions aimed at this major disadvantage of the Runahead Threads mechanism. The result of the research on this line is a set of complementary solutions to enhance RaT in terms of power consumption and energy efficiency.On the one hand, code semantic-aware Runahead threads improve the efficiency of RaT using coarse-grain code semantic analysis at runtime. We provide different techniques that analyze the usefulness of certain code patterns during runahead thread execution. The code patterns selected to perform that analysis are loops and subroutines. By means of the proposed coarse grain analysis, runahead threads oversee the usefulness of loops or subroutines depending on the prefetches opportunities during their executions. Thus, runahead threads decide which of these particular program structures execute depending on the obtained usefulness information, deciding either stall or skip the loop or subroutine executions to reduce the number of useless runahead instructions. Some of the proposed techniques reduce the speculative instruction and wasted energy while achieving similar performance to RaT.On the other hand, the efficient Runahead thread proposal is another contribution focused on improving RaT efficiency. This approach is based on a generic technique which covers all runahead thread executions, independently of the executed program characteristics as code semantic-aware runahead threads are. The key idea behind this new scheme is to find out --when' and --how long' a thread should be executed in runahead mode by predicting the useful runahead distance. The results show that the best of these approaches based on the runahead distance prediction significantly reduces the number of extra speculative instructions executed in runahead threads, as well as the power consumption. Likewise, it maintains the performance benefits of the runahead threads, thereby improving the energy-efficiency of SMT processors using the RaT mechanism.The evolution of Runahead Threads developed in this research provides not only a high performance but also an efficient way of using shared resources in SMT processors in the presence of long latency memory operations. As designers of future SMT systems will be increasingly required to optimize for a combination of single thread performance, total throughput, and energy consumption, RaT-based mechanisms are promising options that provide better performance and energy balance than previous proposals in the field