Advanced interface modelling for 2D shell & 3D continuum problems

This work is motivated by the need for an efficient yet accurate approach for static and dynamic contact analysis of large-scale structures which can a) capture the optimum con- tact position with a moderate number of contact elements, and b) enable across-partition adaptive contact analysis within a parallel processing environment. In addressing these two issues, a novel adaptive node-to-surface contact approach is proposed to discretise the contact boundaries and to trace the evolution of contact locations. Contact search is a demanding process that can become quite complicated for certain types of problem. In this work, an efficient and robust contact search method is proposed, which can a) locally track the master facet of a given slave node despite the appearance of highly non-smooth contact surface, including surfaces with concave/convex regions or with distinct boundaries as well as reversible normals, and b) globally reallocate the master-slave contact pairs based on the penetration state without an expensive global search, providing an effective adaptive contact approach. A dual-interface-based domain decomposition method emphasising across-partition con- tact coupling is proposed. A pair of fully decomposed node-to-surface contact element are proposed to discretise the across-partition contact boundaries. The assumption of small incremental displacements is adopted, which a) avoids the excessive coupling between the decomposed master and slave, b) reduces significantly the communication overhead, and c) facilitates a flexible across-partition adaptive analysis. This strategy is found to provide good results for a sufficiently small time- or load-step, and it also facilitates mix-dimensional contact simulation. Another interest in current thesis is the inaccuracy in non-smooth plates modelled us- ing 2D displacement-based shell elements. In this work the dominant factor causing the inaccuracy is recognised as the incompatible tangential rotations on the two sides of the in- tersection. A 3-noded coupling element is introduced to impose a continuous constraint to couple the incompatible rotations. The significance of the discontinuity in the shell-based folded structure and the effectiveness of the coupling element is demonstrated through numerical studies comparing shell-based models to high fidelity solid-based models.Open Acces

Performance of the Horizontal Wells in a Naturally Fractured Carbonate Reservoir

About 60 percent of the world\u27s proven oil reserves and 40 percent of gas reserves are trapped in carbonate reservoirs. Recovery rates are relatively low in carbonate reservoirs, and it is extremely challenging to predict due to the heterogeneous nature of these reservoirs. The majority of carbonate reservoirs contain fractures which may vary in size from millimeters to kilometers. A typical example of this type of reservoirs is oil and gas fields in the northern Iraq. These fields are almost all developed by vertical wells. This study will investigate the use of horizontal wells to enhance the productivity in one of these reservoirs.;CMG software is used to simulate the Upper Qamchuqa reservoir of the Khabbaz oil field northeastern of Iraq. The Upper Qamchuqa reservoir is a subsurface anticline with a major normal fault on the eastern flank. Moreover, it mainly consists of dolomite, dolomitic limestone, limestone and marly limestone. The simulation model was validated by the history matching the production rates. Subsequently, horizontal wells were added to the model, and the optimum placement and lateral length investigated. Furthermore, the reservoir parameters that have a significant influence on the history matching and the predicted horizontal wells\u27 performance were identified for future development of the field. The results of this study can provide a guideline for reducing the operating costs and increasing the productivity of similar naturally fractured reservoirs in the area

Optimal control of the heave motion of marine cable subsea-unit systems

One of the key problems associated with subsea operations involving tethered subsea units is the motions of support vessels on the ocean surface which can be transmitted to the subsea unit through the cable and increase the tension. In this paper, a theoretical approach for heave compensation is developed. After proper modelling of each element of the system, which includes the cable/subsea-unit, the onboard winch, control theory is applied to design an optimal control law. Numerical simulations are carried out, and it is found that the proposed active control scheme appears to be a promising solution to the problem of heave compensation

From 3D Models to 3D Prints: an Overview of the Processing Pipeline

Due to the wide diffusion of 3D printing technologies, geometric algorithms for Additive Manufacturing are being invented at an impressive speed. Each single step, in particular along the Process Planning pipeline, can now count on dozens of methods that prepare the 3D model for fabrication, while analysing and optimizing geometry and machine instructions for various objectives. This report provides a classification of this huge state of the art, and elicits the relation between each single algorithm and a list of desirable objectives during Process Planning. The objectives themselves are listed and discussed, along with possible needs for tradeoffs. Additive Manufacturing technologies are broadly categorized to explicitly relate classes of devices and supported features. Finally, this report offers an analysis of the state of the art while discussing open and challenging problems from both an academic and an industrial perspective.Comment: European Union (EU); Horizon 2020; H2020-FoF-2015; RIA - Research and Innovation action; Grant agreement N. 68044

New Technologies in the Oil and Gas Industry

Oil and gas are the most important non-renewable sources of energy. Exploring, producing and managing these resources in compliance with HSE standards are challenging tasks. New technologies, workflows and procedures have to be implemented.This book deals with some of these themes and describes some of the advanced technologies related to the oil and gas industry from HSE to field management issues. Some new technologies for geo-modeling, transient well testing and digital rock physics are also introduced. There are many more technical topics to be addressed in future books. This book is aimed at researchers, petroleum engineers, geoscientists and people working within the petroleum industry

The Application of Downhole Vibration Factor in Drilling Tool Reliability Big Data Analytics - A Review

In the challenging downhole environment, drilling tools are normally subject to high temperature, severe vibration, and other harsh operation conditions. The drilling activities generate massive field data, namely field reliability big data (FRBD), which includes downhole operation, environment, failure, degradation, and dynamic data. Field reliability big data has large size, high variety, and extreme complexity. FRBD presents abundant opportunities and great challenges for drilling tool reliability analytics. Consequently, as one of the key factors to affect drilling tool reliability, the downhole vibration factor plays an essential role in the reliability analytics based on FRBD. This paper reviews the important parameters of downhole drilling operations, examines the mode, physical and reliability impact of downhole vibration, and presents the features of reliability big data analytics. Specifically, this paper explores the application of vibration factor in reliability big data analytics covering tool lifetime/failure prediction, prognostics/diagnostics, condition monitoring (CM), and maintenance planning and optimization. Furthermore, the authors highlight the future research about how to better apply the downhole vibration factor in reliability big data analytics to further improve tool reliability and optimize maintenance planning

Experimental and numerical investigations of bone drilling for the indication of bone quality during orthopaedic surgery

Bone drilling is an essential part of many orthopaedic surgical procedures, including those for internal fixation and for attaching prosthetics. Drilling into bone is a fundamental skill that can be both very simple, such as drilling through long bones, or very difficult, such as drilling through the vertebral pedicles where incorrectly drilled holes can result in nerve damage, vascular damage or fractured pedicles. Also large forces experienced during bone drilling may promote crack formation and can result in drill overrun, causing considerable damage to surrounding tissues. Therefore, it is important to understand the effect of bone material quality on the bone drilling forces to select favourable drilling conditions, and improve orthopaedic procedures. [Continues.

Reliability Analysis of On-Demand High-Speed Machining

Current trends in high-speed machining aim to increase manufacturing efficiency by maximizing material removal rates and minimizing part cycle times. This project explores three related technologies and presents a system design for rapid production of custom machined parts. First a reliability analysis in high-speed machining of thin wall features is put forth with experimental results. Second an implementation of on-demand manufacturing is presented with emphasis on flexibility and automation. Finally innovative manufacturing cell design is used to drive costs down by optimizing material and information flow. The resulting high-speed on-demand machining cell design employs effective techniques to reduce production time, meet changing customer needs, and drive down costs