Intelligent systems in manufacturing: current developments and future prospects

Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS

Effects of spent garnet on the compressive and flexural strengths of concrete

Sand is the non-renewable resource which has been over-exploited from rivers in sync with the rapid development of construction industries to produce concrete. This affected the morphology of rivers and interrupted the functionality of riverine ecosystems by pollution. Meanwhile, the unrecyclable spent garnets were disposed of on a large scale and led to waste pollution. Therefore, this study aimed to determine the compressive and flexural strengths of concrete consisting of spent garnet as sand replacement. The specimens were prepared with consisting of spent garnet as sand replacement by weight in 0%, 10%, 20%, 30% and 40%. They were tested under compressive strength test at the age of 7 and 28 days while flexural strength test was conducted on the 28days. The findings revealed that the workability of fresh concrete was enhanced by an incremental amount of spent garnet. However, the compressive and flexural strengths of concrete consisting of spent garnet were discerned to be lower than control samples at all levels of replacement. Overall, the replacement with 20% spent garnet showed the optimum compressive and flexural strengths. It is concluded that the usage of spent garnet is considered as a promising resource for reducing consumption of sand and thus, improving the environmental problems

Resource selection and route generation in discrete manufacturing environment

When put to various sources, the question of which sequence of operations and machines is best for producing a particular component will often receive a wide range of answers. When the factors of optimum cutting conditions, minimum time, minimum cost, and uniform equipment utilisation are added to the equation, the range of answers becomes even more extensive. Many of these answers will be 'correct', however only one can be the best or optimum solution. When a process planner chooses a route and the accompanying machining conditions for a job, he will often rely on his experience to make the choice. Clearly, a manual generation of routes does not take all the important considerations into account. The planner may not be aware of all the factors and routes available to him. A large workshop might have hundreds of possible routes, even if he did know it all', he will never be able to go through all the routes and calculate accurately which is the most suitable for each process - to do this, something faster is required. This thesis describes the design and implementation of an Intelligent Route Generator. The aim is to provide the planner with accurate calculations of all possible production routes m a factory. This will lead up to the selection of an optimum solution according to minimum cost and time. The ultimate goal will be the generation of fast decisions based on expert information. Background knowledge of machining processes and machine tools was initially required, followed by an identification of the role of the knowledge base and the database within the system. An expert system builder. Crystal, and a database software package, DBase III Plus, were chosen for the project. Recommendations for possible expansion of and improvements to the expert system have been suggested for future development

The investigation of the effect of scheduling rules on FMS performance

The application of Flexible Manufacturing Systems (FMSs) has an effect in competitiveness, not only of individual companies but of those countries whose manufactured exports play a significant part in their economy (Hartley, 1984). However, the increasing use of FM Ss to effectively provide customers with diversified products has created a significant set of operational challenges for managers (Mahmoodi et al., 1999). In more recent years therefore, there has been a concentration of effort on FMS scheduling without which the benefits of an FMS cannot be realized. The objective of the reported research is to investigate and extend the contribution which can be made to the FMS scheduling problem through the implementation of computer-based experiments that consider real-time situations. [Continues.

Variant-oriented Planning Models for Parts/Products Grouping, Sequencing and Operations

This research aims at developing novel methods for utilizing the commonality between part/product variants to make modern manufacturing systems more flexible, adaptable, and agile for dealing with less volume per variant and minimizing total changes in the setup between variants. Four models are developed for use in four important domains of manufacturing systems: production sequencing, product family formation, production flow, and products operations sequences retrieval. In all these domains, capitalizing on commonality between the part/product variants has a pivotal role. For production sequencing; a new policy based on setup similarity between product variants is proposed and its results are compared with a developed mathematical model in a permutation flow shop. The results show the proposed algorithm is capable of finding solutions in less than 0.02 seconds with an average error of 1.2%. For product family formation; a novel operation flow based similarity coefficient is developed for variants having networked structures and integrated with two other similarity coefficients, operation and volume similarity, to provide a more comprehensive similarity coefficient. Grouping variants based on the proposed integrated similarity coefficient improves changeover time and utilization of the system. A sequencing method, as a secondary application of this approach, is also developed. For production flow; a new mixed integer programing (MIP) model is developed to assign operations of a family of product variants to candidate machines and also to select the best place for each machine among the candidate locations. The final sequence of performing operations for each variant having networked structures is also determined. The objective is to minimize the total backtracking distance leading to an improvement in total throughput of the system (7.79% in the case study of three engine blocks). For operations sequences retrieval; two mathematical models and an algorithm are developed to construct a master operation sequence from the information of the existing variants belonging to a family of parts/products. This master operation sequence is used to develop the operation sequences for new variants which are sufficiently similar to existing variants. Using the proposed algorithm decreases time of developing the operations sequences of new variants to the seconds

A review of discrete-time optimization models for tactical production planning

This is an Accepted Manuscript of an article published in International Journal of Production Research on 27 Mar 2014, available online: http://doi.org/10.1080/00207543.2014.899721[EN] This study presents a review of optimization models for tactical production planning. The objective of this research is to identify streams and future research directions in this field based on the different classification criteria proposed. The major findings indicate that: (1) the most popular production-planning area is master production scheduling with a big-bucket time-type period; (2) most of the considered limited resources correspond to productive resources and, to a lesser extent, to inventory capacities; (3) the consideration of backlogs, set-up times, parallel machines, overtime capacities and network-type multisite configuration stand out in terms of extensions; (4) the most widely used modelling approach is linear/integer/mixed integer linear programming solved with exact algorithms, such as branch-and-bound, in commercial MIP solvers; (5) CPLEX, C and its variants and Lindo/Lingo are the most popular development tools among solvers, programming languages and modelling languages, respectively; (6) most works perform numerical experiments with random created instances, while a small number of works were validated by real-world data from industrial firms, of which the most popular are sawmills, wood and furniture, automobile and semiconductors and electronic devices.This study has been funded by the Universitat Politècnica de València projects: ‘Material Requirement Planning Fourth Generation (MRPIV)’ (Ref. PAID-05-12) and ‘Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics’ (PAID-06-12).Díaz-Madroñero Boluda, FM.; Mula, J.; Peidro Payá, D. (2014). A review of discrete-time optimization models for tactical production planning. International Journal of Production Research. 52(17):5171-5205. doi:10.1080/00207543.2014.899721S51715205521

Modelling flexible manufacturing systems through discrete event simulation

As customisation and product diversification are becoming standard, industry is looking for strategies to become more adaptable in responding to customer’s needs. Flexible manufacturing systems (FMS) provide a unique capability where there is a need to provide efficiency through production flexibility. Full potential of FMS development is difficult to achieve due to the variability of components within this complex manufacturing system. It has been recognised that there is a requirement for decision support tools to address different aspects of FMS development. Discrete event simulation (DES) is the most common tool used in manufacturing sector for solving complex problems. Through systematic literature review, the need for a conceptual framework for decision support in FMS using DES has been identified. Within this thesis, the conceptual framework (CF) for decision support for FMS using DES has been proposed. The CF is designed based on decision-making areas identified for FMS development in literature and through industry stakeholder feedback: set-up, flexibility and schedule configuration. The CF has been validated through four industrial simulation case studies developed as a part of implementation of a new FMS plant in automotive sector. The research focuses on: (1) a method for primary data collection for simulation validated through a case study of material handling robot behaviour in FMS; (2) an approach for evaluation of optimal production set-up for industrial FMS with DES; (3) a DES based approach for testing FMS flexibility levels; (4) an approach for testing scheduling in FMS with the use of DES. The study has supported the development of systematic approach for decision making in FMS development using DES. The approach provided tools for evidence based decision making in FMS