Doctor of Philosophy

dissertationWhile boundary representations, such as nonuniform rational B-spline (NURBS) surfaces, have traditionally well served the needs of the modeling community, they have not seen widespread adoption among the wider engineering discipline. There is a common perception that NURBS are slow to evaluate and complex to implement. Whereas computer-aided design commonly deals with surfaces, the engineering community must deal with materials that have thickness. Traditional visualization techniques have avoided NURBS, and there has been little cross-talk between the rich spline approximation community and the larger engineering field. Recently there has been a strong desire to marry the modeling and analysis phases of the iterative design cycle, be it in car design, turbulent flow simulation around an airfoil, or lighting design. Research has demonstrated that employing a single representation throughout the cycle has key advantages. Furthermore, novel manufacturing techniques employing heterogeneous materials require the introduction of volumetric modeling representations. There is little question that fields such as scientific visualization and mechanical engineering could benefit from the powerful approximation properties of splines. In this dissertation, we remove several hurdles to the application of NURBS to problems in engineering and demonstrate how their unique properties can be leveraged to solve problems of interest

Computerized Analysis of Magnetic Resonance Images to Study Cerebral Anatomy in Developing Neonates

The study of cerebral anatomy in developing neonates is of great importance for the understanding of brain development during the early period of life. This dissertation therefore focuses on three challenges in the modelling of cerebral anatomy in neonates during brain development. The methods that have been developed all use Magnetic Resonance Images (MRI) as source data. To facilitate study of vascular development in the neonatal period, a set of image analysis algorithms are developed to automatically extract and model cerebral vessel trees. The whole process consists of cerebral vessel tracking from automatically placed seed points, vessel tree generation, and vasculature registration and matching. These algorithms have been tested on clinical Time-of- Flight (TOF) MR angiographic datasets. To facilitate study of the neonatal cortex a complete cerebral cortex segmentation and reconstruction pipeline has been developed. Segmentation of the neonatal cortex is not effectively done by existing algorithms designed for the adult brain because the contrast between grey and white matter is reversed. This causes pixels containing tissue mixtures to be incorrectly labelled by conventional methods. The neonatal cortical segmentation method that has been developed is based on a novel expectation-maximization (EM) method with explicit correction for mislabelled partial volume voxels. Based on the resulting cortical segmentation, an implicit surface evolution technique is adopted for the reconstruction of the cortex in neonates. The performance of the method is investigated by performing a detailed landmark study. To facilitate study of cortical development, a cortical surface registration algorithm for aligning the cortical surface is developed. The method first inflates extracted cortical surfaces and then performs a non-rigid surface registration using free-form deformations (FFDs) to remove residual alignment. Validation experiments using data labelled by an expert observer demonstrate that the method can capture local changes and follow the growth of specific sulcus

Similarity reasoning for local surface analysis and recognition

This thesis addresses the similarity assessment of digital shapes, contributing to the analysis of surface characteristics that are independent of the global shape but are crucial to identify a model as belonging to the same manufacture, the same origin/culture or the same typology (color, common decorations, common feature elements, compatible style elements, etc.). To face this problem, the interpretation of the local surface properties is crucial. We go beyond the retrieval of models or surface patches in a collection of models, facing the recognition of geometric patterns across digital models with different overall shape. To address this challenging problem, the use of both engineered and learning-based descriptions are investigated, building one of the first contributions towards the localization and identification of geometric patterns on digital surfaces. Finally, the recognition of patterns adds a further perspective in the exploration of (large) 3D data collections, especially in the cultural heritage domain. Our work contributes to the definition of methods able to locally characterize the geometric and colorimetric surface decorations. Moreover, we showcase our benchmarking activity carried out in recent years on the identification of geometric features and the retrieval of digital models completely characterized by geometric or colorimetric patterns

From 3D Models to 3D Prints: an Overview of the Processing Pipeline

Due to the wide diffusion of 3D printing technologies, geometric algorithms for Additive Manufacturing are being invented at an impressive speed. Each single step, in particular along the Process Planning pipeline, can now count on dozens of methods that prepare the 3D model for fabrication, while analysing and optimizing geometry and machine instructions for various objectives. This report provides a classification of this huge state of the art, and elicits the relation between each single algorithm and a list of desirable objectives during Process Planning. The objectives themselves are listed and discussed, along with possible needs for tradeoffs. Additive Manufacturing technologies are broadly categorized to explicitly relate classes of devices and supported features. Finally, this report offers an analysis of the state of the art while discussing open and challenging problems from both an academic and an industrial perspective.Comment: European Union (EU); Horizon 2020; H2020-FoF-2015; RIA - Research and Innovation action; Grant agreement N. 68044

Optics of polyhedra: from invisibility cloaks to curved spaces

Transformation optics is a new and highly active field of research, which employs the mathematics of differential geometry to design optical materials and devices with unusual properties.Probably the most exciting device proposed by transformation optics is the invisibility cloak. However, transformation optics can be employed in many other cases, for example when designing a setup mimicking a curved space-time phenomena in a lab. The purpose of this thesis is to establish a new concept of transformation optics: instead of designing complicated materials, we will design our devices using standard optical elements such as lenses or optical wedges. We will stretch the possibilities of geometrical optics by providing a novel description of imaging due to combinations of tilted lenses and the theory of invisibility with ideal thin lenses. This theory will be then applied to design novel transformation optics devices, namely the omnidirectional lens and a number of ideal lens invisibility cloaks. We also present a new approach of building optical systems that simulate light-field propagation in both 2D and 3D curved spaces. Instead of building the actual curved space, the light field is regarded to travel in the respective unfolded net, whose edges are optically identified, using the so-called space-cancelling wedges. By deriving a full analytical solution of the Schrodinger equation, we will also investigate a quantum motion in a number of two dimensional compact surfaces including the Klein bottle, Mobius strip and projective plane. We will show that the wavefunction exhibits perfect revivals on these surfaces and that quantum mechanics on many seemingly unphysical surfaces can be realised as simple diffraction experiments. Our work therefore offers a new concept of optical simulation of curved spaces, and potentially represents a new avenue for research of physics in curved spaces and simulating otherwise inaccessible phenomena in non-Euclidean geometries. We conclude with a summary of potential future projects which lead naturally from the results of this thesis

3D object retrieval and segmentation: various approaches including 2D poisson histograms and 3D electrical charge distributions.

Nowadays 3D models play an important role in many applications: viz. games, cultural heritage, medical imaging etc. Due to the fast growth in the number of available 3D models, understanding, searching and retrieving such models have become interesting fields within computer vision. In order to search and retrieve 3D models, we present two different approaches: one is based on solving the Poisson Equation over 2D silhouettes of the models. This method uses 60 different silhouettes, which are automatically extracted from different viewangles. Solving the Poisson equation for each silhouette assigns a number to each pixel as its signature. Accumulating these signatures generates a final histogram-based descriptor for each silhouette, which we call a SilPH (Silhouette Poisson Histogram). For the second approach, we propose two new robust shape descriptors based on the distribution of charge density on the surface of a 3D model. The Finite Element Method is used to calculate the charge density on each triangular face of each model as a local feature. Then we utilize the Bag-of-Features and concentric sphere frameworks to perform global matching using these local features. In addition to examining the retrieval accuracy of the descriptors in comparison to the state-of-the-art approaches, the retrieval speeds as well as robustness to noise and deformation on different datasets are investigated. On the other hand, to understand new complex models, we have also utilized distribution of electrical charge for proposing a system to decompose models into meaningful parts. Our robust, efficient and fully-automatic segmentation approach is able to specify the segments attached to the main part of a model as well as locating the boundary parts of the segments. The segmentation ability of the proposed system is examined on the standard datasets and its timing and accuracy are compared with the existing state-of-the-art approaches

Mathematical techniques for shape modelling in computer graphics: A distance-based approach.

This research is concerned with shape modelling in computer graphics. The dissertation provides a review of the main research topics and developments in shape modelling and discusses current visualisation techniques required for the display of the models produced. In computer graphics surfaces are normally defined using analytic functions. Geometry however, supplies many shapes without providing their analytic descriptions. These are defined implicitly through fundamental relationships between primitive geometrical objects. Transferring this approach in computer graphics, opens new directions in shape modelling by enabling the definition of new objects or supplying a rigorous alternative to analytical definitions of objects with complex analytical descriptions. We review, in this dissertation, relevant works in the area of implicit modelling. Based on our observations on the shortcomings of these works, we develop an implicit modelling approach which draws on a seminal technique in this area: the distance based object definition. We investigate the principles, potential and applications of this technique both in conceptual terms (modelling aspects) and on technical merit (visualisation issues). This is the context of this PhD research. The conceptual and technological frameworks developed are presented in terms of a comprehensive investigation of an object's constituent primitives and modelling constraints on the one hand, and software visualisation platforms on the other. Finally, we adopt a critical perspective of our work to discuss possible directions for further improvements and exploitation for the modelling approach we have developed

General Dynamic Surface Reconstruction: Application to the 3D Segmentation of the Left Ventricle

Aquesta tesi descriu la nostra contribució a la reconstrucció tridimensional de les superfícies interna i externa del ventricle esquerre humà. La reconstrucció és un primer procés dins d'una aplicació global de Realitat Virtual dissenyada com una important eina de diagnòstic per a hospitals. L'aplicació parteix de la reconstrucció de les superfícies i proveeix a l'expert de manipulació interactiva del model en temps real, a més de càlculs de volums i de altres paràmetres d'interès. El procés de recuperació de les superfícies es caracteritza per la seva velocitat de convergència, la suavitat a les malles finals i la precisió respecte de les dades recuperades. Donat que el diagnòstic de patologies cardíaques requereix d'experiència, temps i molt coneixement professional, la simulació és un procés clau que millora la eficiència.Els nostres algorismes i implementacions han estat aplicats a dades sintètiques i reals amb diferències relatives a la quantitat de dades inexistents, casuístiques presents a casos patològics i anormals. Els conjunts de dades inclouen adquisicions d'instants concrets i de cicles cardíacs complets. La bondat del sistema de reconstrucció ha estat avaluada mitjançant paràmetres mèdics per a poder comparar els nostres resultats finals amb aquells derivats a partir de programari típic utilitzat pels professionals de la medicina.A més de l'aplicació directa al diagnòstic mèdic, la nostra metodologia permet reconstruccions de tipus genèric en el camp dels Gràfics 3D per ordinador. Les nostres reconstruccions permeten generar models tridimensionals amb un baix cost en quant a la interacció manual necessària i a la càrrega computacional associada. Altrament, el nostre mètode pot entendre's com un robust algorisme de triangularització que construeix superfícies partint de núvols de punts que poden obtenir-se d'escàners làser o sensors magnètics, per exemple.Esta tesis describe nuestra contribución a la reconstrucción tridimensional de las superficies interna y externa del ventrículo izquierdo humano. La reconstrucción es un primer proceso que forma parte de una aplicación global de Realidad Virtual diseñada como una importante herramienta de diagnóstico para hospitales. La aplicación parte de la reconstrucción de las superficies y provee al experto de manipulación interactiva del modelo en tiempo real, además de cálculos de volúmenes y de otros parámetros de interés. El proceso de recuperación de las superficies se caracteriza por su velocidad de convergencia, la suavidad en las mallas finales y la precisión respecto de los datos recuperados. Dado que el diagnóstico de patologías cardíacas requiere experiencia, tiempo y mucho conocimiento profesional, la simulación es un proceso clave que mejora la eficiencia.Nuestros algoritmos e implementaciones han sido aplicados a datos sintéticos y reales con diferencias en cuanto a la cantidad de datos inexistentes, casuística presente en casos patológicos y anormales. Los conjuntos de datos incluyen adquisiciones de instantes concretos y de ciclos cardíacos completos. La bondad del sistema de reconstrucción ha sido evaluada mediante parámetros médicos para poder comparar nuestros resultados finales con aquellos derivados a partir de programario típico utilizado por los profesionales de la medicina.Además de la aplicación directa al diagnóstico médico, nuestra metodología permite reconstrucciones de tipo genérico en el campo de los Gráficos 3D por ordenador. Nuestras reconstrucciones permiten generar modelos tridimensionales con un bajo coste en cuanto a la interacción manual necesaria y a la carga computacional asociada. Por otra parte, nuestro método puede entenderse como un robusto algoritmo de triangularización que construye superficies a partir de nubes de puntos que pueden obtenerse a partir de escáneres láser o sensores magnéticos, por ejemplo.This thesis describes a contribution to the three-dimensional reconstruction of the internal and external surfaces of the human's left ventricle. The reconstruction is a first process fitting in a complete VR application that will serve as an important diagnosis tool for hospitals. Beginning with the surfaces reconstruction, the application will provide volume and interactive real-time manipulation to the model. We focus on speed, precision and smoothness for the final surfaces. As long as heart diseases diagnosis requires experience, time and professional knowledge, simulation is a key-process that enlarges efficiency.The algorithms and implementations have been applied to both synthetic and real datasets with differences regarding missing data, present in cases where pathologies and abnormalities arise. The datasets include single acquisitions and complete cardiac cycles. The goodness of the reconstructions has been evaluated with medical parameters in order to compare our results with those retrieved by typical software used by physicians.Besides the direct application to medicine diagnosis, our methodology is suitable for generic reconstructions in the field of computer graphics. Our reconstructions can serve for getting 3D models at low cost, in terms of manual interaction and CPU computation overhead. Furthermore, our method is a robust tessellation algorithm that builds surfaces from clouds of points that can be retrieved from laser scanners or magnetic sensors, among other available hardware