Decentralised State Feedback Tracking Control for Large-Scale Interconnected Systems Using Sliding Mode Techniques

A class of large-scale interconnected systems with matched and unmatched uncertainties is studied in this thesis, with the objective of proposing a controller based on diffeomorphisms and some techniques to deal with the tracking problem of the system. The main research developed in this thesis includes: 1. Large-scale interconnected system is a complex system consisting of several semi-independent subsystems, which are typically located in distinct geographic or logical locations. In this situation, decentralised control which only collects the local information is the practical method to deal with large-scale interconnected systems. The decentralised methodology is utilised throughout this thesis, guaranteeing that systems exhibit essential robustness against uncertainty. 2. Sliding mode technique is involved in the process of controller design. By introducing a nonsingular local diffeomorphism, the large-scale system can be transformed into a system with a specific regular form, where the matched uncertainty is completely absent from the subspace spanned by the sliding mode dynamics. The sliding mode based controller is proposed in this thesis to successfully achieve high robustness of the closed-loop interconnected systems with some particular uncertainties. 3. The considered large-scale interconnected systems can always track the smooth desired signals in a finite time. Each subsystem can track its own ideal signal or all subsystems can track the same ideal signal. Both situations are discussed in this thesis and the results are mathematically proven by introducing the Lyapunov theory, even when operating under the presence of disturbances. At the end of each chapter, some simulation examples, like a coupled inverted pendulums system, a river pollution system and a high-speed train system, are presented to verify the correctness of the proposed theory. At the conclusion of this thesis, a brief summary of the research findings has been provided, along with a mention of potential future research directions in tracking control of large-scale systems, like more general boundedness of interconnections, possibilities of distributed control, collaboration with intelligent control and so on. Some mathematical theories involved and simulation code are included in the appendix section

Leveraging Connected Highway Vehicle Platooning Technology to Improve the Efficiency and Effectiveness of Train Fleeting Under Moving Blocks

Future advanced Positive Train Control systems may allow North American railroads to introduce moving blocks with shorter train headways. This research examines how closely following trains respond to different throttle and brake inputs. Using insights from connected automobile and truck platooning technology, six different following train control algorithms were developed, analyzed for stability, and evaluated with simulated fleets of freight trains. While moving blocks require additional train spacing beyond minimum safe braking distance to account for train control actions, certain following train algorithms can help minimize this distance and balance fuel efficiency and train headway by changing control parameters

Flexible Carbon-Based Electronics and Sensorized Neuroprosthesis

In the United States alone, there are more than 2 million people living with limb loss and prosthetic devices have long been the solution to recover their activities of daily living. However, many of the prosthetic users reported their dissatisfaction with current prostheses and some even abandoned theirs due to poor comfort and limited performance. To improve prosthetic control, advancements in surgical interfaces and sensorized neuroprosthesis are two major focus and have seen great potential. Both perspectives are presented in this work. Several reinnervated muscle surgeries have been invented to enable a better communication with muscle and nerves and a stable interface is essential to record robust muscle signals which are utilized to control a neuroprosthesis. Each muscle target may have slightly different anatomy and the current state-of-the-art implantable electrodes are complex and not easily reproducible and customizable. To address this problem, I present a simple, rapid electrode fabrication method to record muscle signals and easy-to-use electrode materials using carbon black/polydimethylsiloxane (PDMS) composite. Acute in vivo testing shows that the electrodes are highly functional and have the potential to enable large-scale muscle signal recordings with extensive data to improve the neuroprosthetic control. In addition to novel neural interfaces, sensory perception is also critical to improve the manipulation of objects with a prosthesis and enhances prosthetic performance and embodiment with feedback to the user. With recent advances in tactile sensing technology and neuromorphic stimulation interface, efficient real-time communication and functioning between them are still missing. In this work, I build and test a closed-loop system that integrates tactile sensing and neuromorphic electrical stimulation. The system functions in real time and the parameters of the sensory stimulation through transcutaneous electrical nerve stimulation (TENS) convey temporal information and dynamically change responding to real-time tactile data

Transportation Systems Analysis and Assessment

The transportation system is the backbone of any social and economic system, and is also a very complex system in which users, transport means, technologies, services, and infrastructures have to cooperate with each other to achieve common and unique goals.The aim of this book is to present a general overview on some of the main challenges that transportation planners and decision makers are faced with. The book addresses different topics that range from user's behavior to travel demand simulation, from supply chain to the railway infrastructure capacity, from traffic safety issues to Life Cycle Assessment, and to strategies to make the transportation system more sustainable

The design of digital-adaptive controllers for VTOL aircraft

Design procedures for VTOL automatic control systems have been developed and are presented. Using linear-optimal estimation and control techniques as a starting point, digital-adaptive control laws have been designed for the VALT Research Aircraft, a tandem-rotor helicopter which is equipped for fully automatic flight in terminal area operations. These control laws are designed to interface with velocity-command and attitude-command guidance logic, which could be used in short-haul VTOL operations. Developments reported here include new algorithms for designing non-zero-set-point digital regulators, design procedures for rate-limited systems, and algorithms for dynamic control trim setting

Human-robot interaction using a behavioural control strategy

PhD ThesisA topical and important aspect of robotics research is in the area of human-robot interaction (HRI), which addresses the issue of cooperation between a human and a robot to allow tasks to be shared in a safe and reliable manner. This thesis focuses on the design and development of an appropriate set of behaviour strategies for human-robot interactive control by first understanding how an equivalent human-human interaction (HHI) can be used to establish a framework for a robotic behaviour-based approach. To achieve the above goal, two preliminary HHI experimental investigations were initiated in this study. The first of which was designed to evaluate the human dynamic response using a one degree-of-freedom (DOF) HHI rectilinear test where the handler passes a compliant object to the receiver along a constrained horizontal path. The human dynamic response while executing the HHI rectilinear task has been investigated using a Box-Behnken design of experiments [Box and Hunter, 1957] and was based on the McRuer crossover model [McRuer et al. 1995]. To mimic a real-world human-human object handover task where the handler is able to pass an object to the receiver in a 3D workspace, a second more substantive one DOF HHI baton handover task has been developed. The HHI object handover tests were designed to understand the dynamic behavioural characteristics of the human participants, in which the handler was required to dexterously pass an object to the receiver in a timely and natural manner. The profiles of interactive forces between the handler and receiver were measured as a function of time, and how they are modulated whilst performing the tasks, was evaluated. Three key parameters were used to identify the physical characteristics of the human participants, including: peak interactive force (fmax), transfer time (Ttrf), and work done (W). These variables were subsequently used to design and develop an appropriate set of force and velocity control strategies for a six DOF Stäubli robot manipulator arm (TX60) working in a human-robot interactive environment. The optimal design of the software and hardware controller implementation for the robot system has been successfully established in keeping with a behaviour-based approach. External force control based on proportional plus integral (PI) and fuzzy logic control (FLC) algorithms were adopted to control the robot end effector velocity and interactive force in real-time. ii The results of interactive experiments with human-to-robot and robot-to-human handover tasks allowed a comparison of the PI and FLC control strategies. It can be concluded that the quantitative measurement of the performance of robot velocity and force control can be considered acceptable for human-robot interaction. These can provide effective performance during the robot-human object handover tasks, where the robot was able to successfully pass the object from/to the human in a safe, reliable and timely manner. However, after careful analysis with regard to human-robot handover test results, the FLC scheme was shown to be superior to PI control by actively compensating for the dynamics in the non-linear system and demonstrated better overall performance and stability. The FLC also shows superior performance in terms of improved sensitivity to small error changes compared to PI control, which is an advantage in establishing effective robot force control. The results of survey responses from the participants were in agreement with the parallel test outcomes, demonstrating significant satisfaction with the overall performance of the human-robot interactive system, as measured by an average rating of 4.06 on a five point scale. In brief, this research has contributed the foundations for long-term research, particularly in the development of an interactive real-time robot-force control system, which enables the robot manipulator arm to cooperate with a human to facilitate the dextrous transfer of objects in a safe and speedy manner.Thai government and Prince of Songkla University (PSU

Advances in Reinforcement Learning

Reinforcement Learning (RL) is a very dynamic area in terms of theory and application. This book brings together many different aspects of the current research on several fields associated to RL which has been growing rapidly, producing a wide variety of learning algorithms for different applications. Based on 24 Chapters, it covers a very broad variety of topics in RL and their application in autonomous systems. A set of chapters in this book provide a general overview of RL while other chapters focus mostly on the applications of RL paradigms: Game Theory, Multi-Agent Theory, Robotic, Networking Technologies, Vehicular Navigation, Medicine and Industrial Logistic