DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

The use of lasers for hydrographic studies

The utilization of remote laser sensors in water pollution detection and identification, coastal environmental monitoring, and bathymetric depth sounding, is discussed. q

Choose-Your-Own Adventure: A Lightweight, High-Performance Approach To Defect And Variation Mitigation In Reconfigurable Logic

For field-programmable gate arrays (FPGAs), fine-grained pre-computed alternative configurations, combined with simple test-based selection, produce limited per-chip specialization to counter yield loss, increased delay, and increased energy costs that come from fabrication defects and variation. This lightweight approach achieves much of the benefit of knowledge-based full specialization while reducing to practical, palatable levels the computational, testing, and load-time costs that obstruct the application of the knowledge-based approach. In practice this may more than double the power-limited computational capabilities of dies fabricated with 22nm technologies. Contributions of this work: • Choose-Your-own-Adventure (CYA), a novel, lightweight, scalable methodology to achieve defect and variation mitigation • Implementation of CYA, including preparatory components (generation of diverse alternative paths) and FPGA load-time components • Detailed performance characterization of CYA – Comparison to conventional loading and dynamic frequency and voltage scaling (DFVS) – Limit studies to characterize the quality of the CYA implementation and identify potential areas for further optimizatio

Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

vPROBE: Variation aware post-silicon power/performance binning using embedded 3T1D cells

In this paper, we present an on-die post-silicon binning methodology that takes into account the effect of static and dynamic variations and categorizes every processor based on power/performance.The proposed scheme is composed of a discretization hardware that exploits the delay/leakage dependence on variability sources characteristic for categorizationPreprin

Study and simulation results for video landmark acquisition and tracking technology (Vilat-2)

The results of several investigations and hardware developments which supported new technology for Earth feature recognition and classification are described. Data analysis techniques and procedures were developed for processing the Feature Identification and Location Experiment (FILE) data. This experiment was flown in November 1981, on the second Shuttle flight and a second instrument, designed for aircraft flights, was flown over the United States in 1981. Ground tests were performed to provide the basis for designing a more advanced version (four spectral bands) of the FILE which would be capable of classifying clouds and snow (and possibly ice) as distinct features, in addition to the features classified in the Shuttle experiment (two spectral bands). The Shuttle instrument classifies water, bare land, vegetation, and clouds/snow/ice (grouped)

Exploiting heterogeneity in Chip-Multiprocessor Design

In the past decade, semiconductor manufacturers are persistent in building faster and smaller transistors in order to boost the processor performance as projected by Moore’s Law. Recently, as we enter the deep submicron regime, continuing the same processor development pace becomes an increasingly difficult issue due to constraints on power, temperature, and the scalability of transistors. To overcome these challenges, researchers propose several innovations at both architecture and device levels that are able to partially solve the problems. These diversities in processor architecture and manufacturing materials provide solutions to continuing Moore’s Law by effectively exploiting the heterogeneity, however, they also introduce a set of unprecedented challenges that have been rarely addressed in prior works. In this dissertation, we present a series of in-depth studies to comprehensively investigate the design and optimization of future multi-core and many-core platforms through exploiting heteroge-neities. First, we explore a large design space of heterogeneous chip multiprocessors by exploiting the architectural- and device-level heterogeneities, aiming to identify the optimal design patterns leading to attractive energy- and cost-efficiencies in the pre-silicon stage. After this high-level study, we pay specific attention to the architectural asymmetry, aiming at developing a heterogeneity-aware task scheduler to optimize the energy-efficiency on a given single-ISA heterogeneous multi-processor. An advanced statistical tool is employed to facilitate the algorithm development. In the third study, we shift our concentration to the device-level heterogeneity and propose to effectively leverage the advantages provided by different materials to solve the increasingly important reliability issue for future processors