The Factory of the Future

A brief history of aircraft production techniques is given. A flexible machining cell is then described. It is a computer controlled system capable of performing 4-axis machining part cleaning, dimensional inspection and materials handling functions in an unmanned environment. The cell was designed to: allow processing of similar and dissimilar parts in random order without disrupting production; allow serial (one-shipset-at-a-time) manufacturing; reduce work-in-process inventory; maximize machine utilization through remote set-up; maximize throughput and minimize labor

GTTC Future of Ground Testing Meta-Analysis of 20 Documents

National research, development, test, and evaluation ground testing capabilities in the United States are at risk. There is a lack of vision and consensus on what is and will be needed, contributing to a significant threat that ground test capabilities may not be able to meet the national security and industrial needs of the future. To support future decisions, the AIAA Ground Testing Technical Committees (GTTC) Future of Ground Test (FoGT) Working Group selected and reviewed 20 seminal documents related to the application and direction of ground testing. Each document was reviewed, with the content main points collected and organized into sections in the form of a gap analysis current state, future state, major challenges/gaps, and recommendations. This paper includes key findings and selected commentary by an editing team

Digitalized manufacturing logistics in engineer-to-order operations

This is a post-peer-review, pre-copyedit version of an article published in Advances in Production Management Systems. Production Management for the Factory of the Future. APMS 2019. IFIP Advances in Information and Communication Technology, vol. 566. The final authenticated version is available online at: https://doi.org/10.1007/978-3-030-30000-5_71. The high complexity in Engineer-To-Order (ETO) operations causes major challenges for manufacturing logistics, especially in complex ETO, i.e. one-of-a-kind production. Increased digitalization of manufacturing logistics processes and activities can facilitate more efficient coordination of the material and information flows for manufacturing operations in general. However, it is not clear how to do this in the ETO environment, where products are highly customized and production is non-repetitive. This paper aims to investigate the challenges related to manufacturing logistics in ETO and how digital technologies can be applied to address them. Through a case study of a Norwegian shipyard, four main challenges related to manufacturing logistics are identified. Further, by reviewing recent literature on ETO and digitalization, the paper identifies specific applications of digital technologies in ETO manufacturing. Finally, by linking manufacturing logistics challenges to digitalization, the paper suggests four main features of digitalized manufacturing logistics in ETO: (i) seamless, digitalized information flow, (ii) identification and interconnectivity, (iii) digitalized operator support, and (iv) automated and autonomous material flow. Thus, the paper provides valuable insights into how ETO companies can move towards digitalized manufacturing logistics

Advances in Production Management Systems: Issues, Trends, and Vision Towards 2030

Since its inception in 1978, the IFIP Working Group (WG) 5.7 on Advances in Production Management Systems (APMS) has played an active role in the fields of production and production management. The Working Group has focused on the conception, development, strategies, frameworks, architectures, processes, methods, and tools needed for the advancement of both fields. The associated standards created by the IFIP WG5.7 have always been impacted by the latest developments of scientific rigour, academic research, and industrial practices. The most recent of those developments involves the Fourth Industrial Revolution, which is having remarkable (r)evolutionary and disruptive changes in both the fields and the standards. These changes are triggered by the fusion of advanced operational and informational technologies, innovative operating and business models, as well as social and environmental pressures for more sustainable production systems. This chapter reviews past, current, and future issues and trends to establish a coherent vision and research agenda for the IFIP WG5.7 and its international community. The chapter covers a wide range of production aspects and resources required to design, engineer, and manage the next generation of sustainable and smart production systems.acceptedVersio

Orbital operation for large automated satellites

Orbital operations concepts for the shuttle launched Large Automated Satellites (LAS) are discussed. It includes the orbital operations elements and the major options for accomplishing each element. This study is based on the preliminary payload information available in Level I and II documents and on orbital operations methods used on past programs, both manned and unmanned. It includes a definition of detailed trade studies which need to be performed as satellite design details and organization responsibilities are defined. The major objectives of this study were to define operational methods and requirements for the long duration LAS missions which are effective and primarily economical to implement

A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

Reducing risk in pre-production investigations through undergraduate engineering projects.

This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level. The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor. The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits. The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process

Radio Frequency Identification: Supply Chain Impact and Implementation Challenges

Radio Frequency Identification (RFID) technology has received considerable attention from practitioners, driven by mandates from major retailers and the United States Department of Defense. RFID technology promises numerous benefits in the supply chain, such as increased visibility, security and efficiency. Despite such attentions and the anticipated benefits, RFID is not well-understood and many problems exist in the adoption and implementation of RFID. The purpose of this paper is to introduce RFID technology to practitioners and academicians by systematically reviewing the relevant literature, discussing how RFID systems work, their advantages, supply chain impacts, and the implementation challenges and the corresponding strategies, in the hope of providing guidance for practitioners in the implementation of RFID technology and offering a springboard for academicians to conduct future research in this area