Modeling DVFS and Power-Gating Actuators for Cycle-Accurate NoC-Based Simulators

Networks-on-chip (NoCs) are a widely recognized viable interconnection paradigm to support the multi-core revolution. One of the major design issues of multicore architectures is still the power, which can no longer be considered mainly due to the cores, since the NoC contribution to the overall energy budget is relevant. To face both static and dynamic power while balancing NoC performance, different actuators have been exploited in literature, mainly dynamic voltage frequency scaling (DVFS) and power gating. Typically, simulation-based tools are employed to explore the huge design space by adopting simplified models of the components. As a consequence, the majority of state-of-the-art on NoC power-performance optimization do not accurately consider timing and power overheads of actuators, or (even worse) do not consider them at all, with the risk of overestimating the benefits of the proposed methodologies. This article presents a simulation framework for power-performance analysis of multicore architectures with specific focus on the NoC. It integrates accurate power gating and DVFS models encompassing also their timing and power overheads. The value added of our proposal is manyfold: (i) DVFS and power gating actuators are modeled starting from SPICE-level simulations; (ii) such models have been integrated in the simulation environment; (iii) policy analysis support is plugged into the framework to enable assessment of different policies; (iv) a flexible GALS (globally asynchronous locally synchronous) support is provided, covering both handshake and FIFO re-synchronization schemas. To demonstrate both the flexibility and extensibility of our proposal, two simple policies exploiting the modeled actuators are discussed in the article

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.Siirretty Doriast

Techniques to Improve Energy Efficiency on Heterogeneous Multiprocessors under Timing and Quality Constraints

Traditionally, applications are executed without the notion of a computational deadline and often use all available system resources, which leads to higher\ua0energy consumption. User specification of Quality of Service (QoS) constraints,\ua0in terms of completion time and solution quality, opens up for allocation of\ua0just enough resources to an application to finish just in time and thereby save\ua0energy. Modern heterogeneous multiprocessor (HMP) platforms provide a\ua0set of configurable resources, including a frequency range of dynamic voltage\ua0frequency scaling (DVFS), one among a set processor types, and one or a\ua0plurality of processors of each type. They can be configured at run-time to\ua0open up new opportunities for resource management.This thesis presents techniques to reduce energy consumption under QoS\ua0constraints by allocating resources at run-time on heterogeneous multiprocessor platforms targeting sequential and parallel iterative and task-parallel\ua0applications. The proposed techniques rely on a progress-tracking framework\ua0that monitors and predicts how much time is left until the application finishes.\ua0Furthermore, the proposed framework enables the prediction of computation\ua0demand and performance requirements for future iterations or tasks.\ua0The first contribution of this thesis is a resource management technique,\ua0called SLOOP, targeting single-threaded applications. SLOOP allocates resources, i.e., processor type and DVFS, for each iteration to meet deadlines\ua0while using the prediction of computational demand and execution time.The second contribution of this thesis is a resource-management scheme, called SaC, for multi-threaded applications executing on HMPs, where resources\ua0also include the number of processors besides DVFS and processor type. SaC\ua0first chooses the most energy-efficient configuration that meets the deadline.\ua0The proposed technique collects execution-time slack over subsequent iterations\ua0to select a configuration that can save energy.The third contribution of this thesis is a resource manager, called Task-RM, for task-parallel applications executing on HMPs under QoS constraints. Task-RM exploits the variance in task execution times and imbalance between\ua0sibling tasks to allocate just enough resources in terms of DVFS and processor type. It uses an innovative off-line analysis to avoid redoing scheduling analysis\ua0at run-time.Finally, the fourth contribution is a scheme, called Approx-RM, that can exploit accuracy-energy trade-offs in approximate iterative applications. Approx-RM allocates an appropriate amount of resources while guaranteeing timing\ua0and solution quality specifications. Approx-RM first predicts the iteration count required to meet the quality target and then allocates enough resources\ua0on an HMP in terms of DVFS, processor type, and processor count to save\ua0energy while meeting a performance target

Adaptive Knobs for Resource Efficient Computing

Performance demands of emerging domains such as artificial intelligence, machine learning and vision, Internet-of-things etc., continue to grow. Meeting such requirements on modern multi/many core systems with higher power densities, fixed power and energy budgets, and thermal constraints exacerbates the run-time management challenge. This leaves an open problem on extracting the required performance within the power and energy limits, while also ensuring thermal safety. Existing architectural solutions including asymmetric and heterogeneous cores and custom acceleration improve performance-per-watt in specific design time and static scenarios. However, satisfying applications’ performance requirements under dynamic and unknown workload scenarios subject to varying system dynamics of power, temperature and energy requires intelligent run-time management. Adaptive strategies are necessary for maximizing resource efficiency, considering i) diverse requirements and characteristics of concurrent applications, ii) dynamic workload variation, iii) core-level heterogeneity and iv) power, thermal and energy constraints. This dissertation proposes such adaptive techniques for efficient run-time resource management to maximize performance within fixed budgets under unknown and dynamic workload scenarios. Resource management strategies proposed in this dissertation comprehensively consider application and workload characteristics and variable effect of power actuation on performance for pro-active and appropriate allocation decisions. Specific contributions include i) run-time mapping approach to improve power budgets for higher throughput, ii) thermal aware performance boosting for efficient utilization of power budget and higher performance, iii) approximation as a run-time knob exploiting accuracy performance trade-offs for maximizing performance under power caps at minimal loss of accuracy and iv) co-ordinated approximation for heterogeneous systems through joint actuation of dynamic approximation and power knobs for performance guarantees with minimal power consumption. The approaches presented in this dissertation focus on adapting existing mapping techniques, performance boosting strategies, software and dynamic approximations to meet the performance requirements, simultaneously considering system constraints. The proposed strategies are compared against relevant state-of-the-art run-time management frameworks to qualitatively evaluate their efficacy

Energy-Efficient and Reliable Computing in Dark Silicon Era

Dark silicon denotes the phenomenon that, due to thermal and power constraints, the fraction of transistors that can operate at full frequency is decreasing in each technology generation. Moore’s law and Dennard scaling had been backed and coupled appropriately for five decades to bring commensurate exponential performance via single core and later muti-core design. However, recalculating Dennard scaling for recent small technology sizes shows that current ongoing multi-core growth is demanding exponential thermal design power to achieve linear performance increase. This process hits a power wall where raises the amount of dark or dim silicon on future multi/many-core chips more and more. Furthermore, from another perspective, by increasing the number of transistors on the area of a single chip and susceptibility to internal defects alongside aging phenomena, which also is exacerbated by high chip thermal density, monitoring and managing the chip reliability before and after its activation is becoming a necessity. The proposed approaches and experimental investigations in this thesis focus on two main tracks: 1) power awareness and 2) reliability awareness in dark silicon era, where later these two tracks will combine together. In the first track, the main goal is to increase the level of returns in terms of main important features in chip design, such as performance and throughput, while maximum power limit is honored. In fact, we show that by managing the power while having dark silicon, all the traditional benefits that could be achieved by proceeding in Moore’s law can be also achieved in the dark silicon era, however, with a lower amount. Via the track of reliability awareness in dark silicon era, we show that dark silicon can be considered as an opportunity to be exploited for different instances of benefits, namely life-time increase and online testing. We discuss how dark silicon can be exploited to guarantee the system lifetime to be above a certain target value and, furthermore, how dark silicon can be exploited to apply low cost non-intrusive online testing on the cores. After the demonstration of power and reliability awareness while having dark silicon, two approaches will be discussed as the case study where the power and reliability awareness are combined together. The first approach demonstrates how chip reliability can be used as a supplementary metric for power-reliability management. While the second approach provides a trade-off between workload performance and system reliability by simultaneously honoring the given power budget and target reliability

Performance and power optimizations in chip multiprocessors for throughput-aware computation

The so-called "power (or power density) wall" has caused core frequency (and single-thread performance) to slow down, giving rise to the era of multi-core/multi-thread processors. For example, the IBM POWER4 processor, released in 2001, incorporated two single-thread cores into the same chip. In 2010, IBM released the POWER7 processor with eight 4-thread cores in the same chip, for a total capacity of 32 execution contexts. The ever increasing number of cores and threads gives rise to new opportunities and challenges for software and hardware architects. At software level, applications can benefit from the abundant number of execution contexts to boost throughput. But this challenges programmers to create highly-parallel applications and operating systems capable of scheduling them correctly. At hardware level, the increasing core and thread count puts pressure on the memory interface, because memory bandwidth grows at a slower pace ---phenomenon known as the "bandwidth (or memory) wall". In addition to memory bandwidth issues, chip power consumption rises due to manufacturers' difficulty to lower operating voltages sufficiently every processor generation. This thesis presents innovations to improve bandwidth and power consumption in chip multiprocessors (CMPs) for throughput-aware computation: a bandwidth-optimized last-level cache (LLC), a bandwidth-optimized vector register file, and a power/performance-aware thread placement heuristic. In contrast to state-of-the-art LLC designs, our organization avoids data replication and, hence, does not require keeping data coherent. Instead, the address space is statically distributed all over the LLC (in a fine-grained interleaving fashion). The absence of data replication increases the cache effective capacity, which results in better hit rates and higher bandwidth compared to a coherent LLC. We use double buffering to hide the extra access latency due to the lack of data replication. The proposed vector register file is composed of thousands of registers and organized as an aggregation of banks. We leverage such organization to attach small special-function "local computation elements" (LCEs) to each bank. This approach ---referred to as the "processor-in-regfile" (PIR) strategy--- overcomes the limited number of register file ports. Because each LCE is a SIMD computation element and all of them can proceed concurrently, the PIR strategy constitutes a highly-parallel super-wide-SIMD device (ideal for throughput-aware computation). Finally, we present a heuristic to reduce chip power consumption by dynamically placing software (application) threads across hardware (physical) threads. The heuristic gathers chip-level power and performance information at runtime to infer characteristics of the applications being executed. For example, if an application's threads share data, the heuristic may decide to place them in fewer cores to favor inter-thread data sharing and communication. In such case, the number of active cores decreases, which is a good opportunity to switch off the unused cores to save power. It is increasingly harder to find bulletproof (micro-)architectural solutions for the bandwidth and power scalability limitations in CMPs. Consequently, we think that architects should attack those problems from different flanks simultaneously, with complementary innovations. This thesis contributes with a battery of solutions to alleviate those problems in the context of throughput-aware computation: 1) proposing a bandwidth-optimized LLC; 2) proposing a bandwidth-optimized register file organization; and 3) proposing a simple technique to improve power-performance efficiency.El excesivo consumo de potencia de los procesadores actuales ha desacelerado el incremento en la frecuencia operativa de los mismos para dar lugar a la era de los procesadores con múltiples núcleos y múltiples hilos de ejecución. Por ejemplo, el procesador POWER7 de IBM, lanzado al mercado en 2010, incorpora ocho núcleos en el mismo chip, con cuatro hilos de ejecución por núcleo. Esto da lugar a nuevas oportunidades y desafíos para los arquitectos de software y hardware. A nivel de software, las aplicaciones pueden beneficiarse del abundante número de núcleos e hilos de ejecución para aumentar el rendimiento. Pero esto obliga a los programadores a crear aplicaciones altamente paralelas y sistemas operativos capaces de planificar correctamente la ejecución de las mismas. A nivel de hardware, el creciente número de núcleos e hilos de ejecución ejerce presión sobre la interfaz de memoria, ya que el ancho de banda de memoria crece a un ritmo más lento. Además de los problemas de ancho de banda de memoria, el consumo de energía del chip se eleva debido a la dificultad de los fabricantes para reducir suficientemente los voltajes de operación entre generaciones de procesadores. Esta tesis presenta innovaciones para mejorar el ancho de banda y consumo de energía en procesadores multinúcleo en el ámbito de la computación orientada a rendimiento ("throughput-aware computation"): una memoria caché de último nivel ("last-level cache" o LLC) optimizada para ancho de banda, un banco de registros vectorial optimizado para ancho de banda, y una heurística para planificar la ejecución de aplicaciones paralelas orientada a mejorar la eficiencia del consumo de potencia y desempeño. En contraste con los diseños de LLC de última generación, nuestra organización evita la duplicación de datos y, por tanto, no requiere de técnicas de coherencia. El espacio de direcciones de memoria se distribuye estáticamente en la LLC con un entrelazado de grano fino. La ausencia de replicación de datos aumenta la capacidad efectiva de la memoria caché, lo que se traduce en mejores tasas de acierto y mayor ancho de banda en comparación con una LLC coherente. Utilizamos la técnica de "doble buffering" para ocultar la latencia adicional necesaria para acceder a datos remotos. El banco de registros vectorial propuesto se compone de miles de registros y se organiza como una agregación de bancos. Incorporamos a cada banco una pequeña unidad de cómputo de propósito especial ("local computation element" o LCE). Este enfoque ---que llamamos "computación en banco de registros"--- permite superar el número limitado de puertos en el banco de registros. Debido a que cada LCE es una unidad de cómputo con soporte SIMD ("single instruction, multiple data") y todas ellas pueden proceder de forma concurrente, la estrategia de "computación en banco de registros" constituye un dispositivo SIMD altamente paralelo. Por último, presentamos una heurística para planificar la ejecución de aplicaciones paralelas orientada a reducir el consumo de energía del chip, colocando dinámicamente los hilos de ejecución a nivel de software entre los hilos de ejecución a nivel de hardware. La heurística obtiene, en tiempo de ejecución, información de consumo de potencia y desempeño del chip para inferir las características de las aplicaciones. Por ejemplo, si los hilos de ejecución a nivel de software comparten datos significativamente, la heurística puede decidir colocarlos en un menor número de núcleos para favorecer el intercambio de datos entre ellos. En tal caso, los núcleos no utilizados se pueden apagar para ahorrar energía. Cada vez es más difícil encontrar soluciones de arquitectura "a prueba de balas" para resolver las limitaciones de escalabilidad de los procesadores actuales. En consecuencia, creemos que los arquitectos deben atacar dichos problemas desde diferentes flancos simultáneamente, con innovaciones complementarias

Multiprocessor System-on-Chips based Wireless Sensor Network Energy Optimization

Wireless Sensor Network (WSN) is an integrated part of the Internet-of-Things (IoT) used to monitor the physical or environmental conditions without human intervention. In WSN one of the major challenges is energy consumption reduction both at the sensor nodes and network levels. High energy consumption not only causes an increased carbon footprint but also limits the lifetime (LT) of the network. Network-on-Chip (NoC) based Multiprocessor System-on-Chips (MPSoCs) are becoming the de-facto computing platform for computationally extensive real-time applications in IoT due to their high performance and exceptional quality-of-service. In this thesis a task scheduling problem is investigated using MPSoCs architecture for tasks with precedence and deadline constraints in order to minimize the processing energy consumption while guaranteeing the timing constraints. Moreover, energy-aware nodes clustering is also performed to reduce the transmission energy consumption of the sensor nodes. Three distinct problems for energy optimization are investigated given as follows: First, a contention-aware energy-efficient static scheduling using NoC based heterogeneous MPSoC is performed for real-time tasks with an individual deadline and precedence constraints. An offline meta-heuristic based contention-aware energy-efficient task scheduling is developed that performs task ordering, mapping, and voltage assignment in an integrated manner. Compared to state-of-the-art scheduling our proposed algorithm significantly improves the energy-efficiency. Second, an energy-aware scheduling is investigated for a set of tasks with precedence constraints deploying Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs. A novel population based algorithm called ARSH-FATI is developed that can dynamically switch between explorative and exploitative search modes at run-time. ARSH-FATI performance is superior to the existing task schedulers developed for homogeneous VFI-NoC-MPSoCs. Third, the transmission energy consumption of the sensor nodes in WSN is reduced by developing ARSH-FATI based Cluster Head Selection (ARSH-FATI-CHS) algorithm integrated with a heuristic called Novel Ranked Based Clustering (NRC). In cluster formation parameters such as residual energy, distance parameters, and workload on CHs are considered to improve LT of the network. The results prove that ARSH-FATI-CHS outperforms other state-of-the-art clustering algorithms in terms of LT.University of Derby, Derby, U

Energy Concerns with HPC Systems and Applications

For various reasons including those related to climate changes, {\em energy} has become a critical concern in all relevant activities and technical designs. For the specific case of computer activities, the problem is exacerbated with the emergence and pervasiveness of the so called {\em intelligent devices}. From the application side, we point out the special topic of {\em Artificial Intelligence}, who clearly needs an efficient computing support in order to succeed in its purpose of being a {\em ubiquitous assistant}. There are mainly two contexts where {\em energy} is one of the top priority concerns: {\em embedded computing} and {\em supercomputing}. For the former, power consumption is critical because the amount of energy that is available for the devices is limited. For the latter, the heat dissipated is a serious source of failure and the financial cost related to energy is likely to be a significant part of the maintenance budget. On a single computer, the problem is commonly considered through the electrical power consumption. This paper, written in the form of a survey, we depict the landscape of energy concerns in computer activities, both from the hardware and the software standpoints.Comment: 20 page

Application-Directed DVFS using Multiple Clock Domains on Graphics Hardware

As handheld devices have become increasingly popular, powerful programmable graphics hardware for mobile and handheld devices has been deployed. While many resources on mobile devices are limited, the predominant problem for mobile devices is their limited battery power. Several techniques have been proposed to increase the energy efficiency of mobile applications and improve battery life. In this thesis, we propose a new dynamic voltage and frequency scaling (DVFS) on Graphics Processing Units (GPU). In most cases, cues within the graphics appli- cation can be used to predict portions of a GPU that will be used or unused when the application is run. We partition the GPU into six clock domains that can be clocked at different rates. Specifically, each domain it has its own voltage and frequency set- ting based on its predicted workload to save energy without reducing applications frame rates. In addition, we propose an signature-based algorithm for predicting the workload offered to our six clock domains by a given application to decide voltage and frequency settings. We conduct experiments and compare the results of our new signature based workload prediction algorithm with some other traditional interval based workload prediction algorithms. Our results show that our signature-based prediction can save 30-50% energy without afecting application frame rates

Towards Optimal Application Mapping for Energy-Efficient Many-Core Platforms

Siirretty Doriast