17,918 research outputs found
A novel haptic model and environment for maxillofacial surgical operation planning and manipulation
This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone
An empirical learning-based validation procedure for simulation workflow
Simulation workflow is a top-level model for the design and control of
simulation process. It connects multiple simulation components with time and
interaction restrictions to form a complete simulation system. Before the
construction and evaluation of the component models, the validation of
upper-layer simulation workflow is of the most importance in a simulation
system. However, the methods especially for validating simulation workflow is
very limit. Many of the existing validation techniques are domain-dependent
with cumbersome questionnaire design and expert scoring. Therefore, this paper
present an empirical learning-based validation procedure to implement a
semi-automated evaluation for simulation workflow. First, representative
features of general simulation workflow and their relations with validation
indices are proposed. The calculation process of workflow credibility based on
Analytic Hierarchy Process (AHP) is then introduced. In order to make full use
of the historical data and implement more efficient validation, four learning
algorithms, including back propagation neural network (BPNN), extreme learning
machine (ELM), evolving new-neuron (eNFN) and fast incremental gaussian mixture
model (FIGMN), are introduced for constructing the empirical relation between
the workflow credibility and its features. A case study on a landing-process
simulation workflow is established to test the feasibility of the proposed
procedure. The experimental results also provide some useful overview of the
state-of-the-art learning algorithms on the credibility evaluation of
simulation models
Reciprocity Calibration for Massive MIMO: Proposal, Modeling and Validation
This paper presents a mutual coupling based calibration method for
time-division-duplex massive MIMO systems, which enables downlink precoding
based on uplink channel estimates. The entire calibration procedure is carried
out solely at the base station (BS) side by sounding all BS antenna pairs. An
Expectation-Maximization (EM) algorithm is derived, which processes the
measured channels in order to estimate calibration coefficients. The EM
algorithm outperforms current state-of-the-art narrow-band calibration schemes
in a mean squared error (MSE) and sum-rate capacity sense. Like its
predecessors, the EM algorithm is general in the sense that it is not only
suitable to calibrate a co-located massive MIMO BS, but also very suitable for
calibrating multiple BSs in distributed MIMO systems.
The proposed method is validated with experimental evidence obtained from a
massive MIMO testbed. In addition, we address the estimated narrow-band
calibration coefficients as a stochastic process across frequency, and study
the subspace of this process based on measurement data. With the insights of
this study, we propose an estimator which exploits the structure of the process
in order to reduce the calibration error across frequency. A model for the
calibration error is also proposed based on the asymptotic properties of the
estimator, and is validated with measurement results.Comment: Submitted to IEEE Transactions on Wireless Communications,
21/Feb/201
Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model
This paper presents a new modelling methodology for compensation of the thermal errors on a gantry-type 5-axis CNC machine tool. The method uses a “Grey Neural Network Model with Convolution Integral” (GNNMCI(1, N)), which makes full use of the similarities and complementarity between Grey system models and artificial neural networks (ANNs) to overcome the disadvantage of applying either model in isolation. A Particle Swarm Optimisation (PSO) algorithm is also employed to optimise the proposed Grey neural network. The size of the data pairs is crucial when the generation of data is a costly affair, since the machine downtime necessary to acquire the data is often considered prohibitive. Under such circumstances, optimisation of the number of data pairs used for training is of prime concern for calibrating a physical model or training a black-box model. A Grey Accumulated Generating Operation (AGO), which is a basis of the Grey system theory, is used to transform the original data to a monotonic series of data, which has less randomness than the original series of data. The choice of inputs to the thermal model is a non-trivial decision which is ultimately a compromise between the ability to obtain data that sufficiently correlates with the thermal distortion and the cost of implementation of the necessary feedback sensors. In this study, temperature measurement at key locations was supplemented by direct distortion measurement at accessible locations. This form of data fusion simplifies the modelling process, enhances the accuracy of the system and reduces the overall number of inputs to the model, since otherwise a much larger number of thermal sensors would be required to cover the entire structure. The Z-axis heating test, C-axis heating test, and the combined (helical) movement are considered in this work. The compensation values, calculated by the GNNMCI(1, N) model were sent to the controller for live error compensation. Test results show that a 85% reduction in thermal errors was achieved after compensation
Selected Papers from IEEE ICASI 2019
The 5th IEEE International Conference on Applied System Innovation 2019 (IEEE ICASI 2019, https://2019.icasi-conf.net/), which was held in Fukuoka, Japan, on 11–15 April, 2019, provided a unified communication platform for a wide range of topics. This Special Issue entitled “Selected Papers from IEEE ICASI 2019” collected nine excellent papers presented on the applied sciences topic during the conference. Mechanical engineering and design innovations are academic and practical engineering fields that involve systematic technological materialization through scientific principles and engineering designs. Technological innovation by mechanical engineering includes information technology (IT)-based intelligent mechanical systems, mechanics and design innovations, and applied materials in nanoscience and nanotechnology. These new technologies that implant intelligence in machine systems represent an interdisciplinary area that combines conventional mechanical technology and new IT. The main goal of this Special Issue is to provide new scientific knowledge relevant to IT-based intelligent mechanical systems, mechanics and design innovations, and applied materials in nanoscience and nanotechnology
Numerical Computation, Data Analysis and Software in Mathematics and Engineering
The present book contains 14 articles that were accepted for publication in the Special Issue “Numerical Computation, Data Analysis and Software in Mathematics and Engineering” of the MDPI journal Mathematics. The topics of these articles include the aspects of the meshless method, numerical simulation, mathematical models, deep learning and data analysis. Meshless methods, such as the improved element-free Galerkin method, the dimension-splitting, interpolating, moving, least-squares method, the dimension-splitting, generalized, interpolating, element-free Galerkin method and the improved interpolating, complex variable, element-free Galerkin method, are presented. Some complicated problems, such as tge cold roll-forming process, ceramsite compound insulation block, crack propagation and heavy-haul railway tunnel with defects, are numerically analyzed. Mathematical models, such as the lattice hydrodynamic model, extended car-following model and smart helmet-based PLS-BPNN error compensation model, are proposed. The use of the deep learning approach to predict the mechanical properties of single-network hydrogel is presented, and data analysis for land leasing is discussed. This book will be interesting and useful for those working in the meshless method, numerical simulation, mathematical model, deep learning and data analysis fields
Evaluation of a semi-active gravity gradient system. Volume II - Appendices
Evaluation of semi-active gravity gradient system - appendixe
- …