On Control System Design for the Conventional Mode of Operation of Vibrational Gyroscopes

This paper presents a novel control circuitry design for both vibrating axes (drive and sense) of vibrational gyroscopes, and a new sensing method for time-varying rotation rates. The control design is motivated to address the challenges posed by manufacturing imperfection and environment vibrations that are particularly pronounced in microelectromechanical systems (MEMS) gyroscopes. The method of choice is active disturbance rejection control that, unlike most existing control design methods, does not depend on an accurate model of the plant. The task of control design is simplified when the internal dynamics, such as mechanical cross coupling between the drive and sense axes, and external vibrating forces are estimated and cancelled in real time. In both simulation and hardware tests on a vibrational piezoelectric beam gyroscope, the proposed controller proves to be robust against structural uncertainties; it also facilitates accurate sensing of time-varying rotation rates. The results demonstrate a simple, economic, control solution for compensating the manufacturing imperfections and improving sensing performance of the MEMS gyroscopes

Drive-Mode Control for Vibrational MEMS Gyroscopes

This paper presents a novel design methodology and hardware implementation for the drive-mode control of vibrational micro-electro-mechanical systems gyroscopes. Assuming that the sense mode (axis) of the gyroscope is operating under open loop, the drive-mode controller compensates an undesirable mechanical spring-coupling term between the two vibrating modes, attenuates the effect of mechanical-thermal noise, and most importantly, forces the output of the drive mode to oscillate along a desired trajectory. The stability and robustness of the control system are successfully justified through frequency-domain analysis. The tracking error between the real output and the reference signal for the drive mode is proved to be converging with the increase of the bandwidth of the controller. The controller is first simulated and then implemented using field-programmable analog array circuits on a vibrational piezoelectric beam gyroscope. The simulation and experimental results verified the effectiveness of the controller

On Control System Design for the Conventional Mode of Operation of Vibrational Gyroscopes

This paper presents a novel control circuitry design for both vibrating axes (drive and sense) of vibrational gyroscopes, and a new sensing method for time-varying rotation rates. The control design is motivated to address the challenges posed by manufacturing imperfection and environment vibrations that are particularly pronounced in microelectromechanical systems (MEMS) gyroscopes. The method of choice is active disturbance rejection control that, unlike most existing control design methods, does not depend on an accurate model of the plant. The task of control design is simplified when the internal dynamics, such as mechanical cross coupling between the drive and sense axes, and external vibrating forces are estimated and cancelled in real time. In both simulation and hardware tests on a vibrational piezoelectric beam gyroscope, the proposed controller proves to be robust against structural uncertainties; it also facilitates accurate sensing of time-varying rotation rates. The results demonstrate a simple, economic, control solution for compensating the manufacturing imperfections and improving sensing performance of the MEMS gyroscopes

Generalized extended state observer based control for systems with mismatched uncertainties

The standard extended state observer based control (ESOBC) method is only applicable for a class of single-input-single-output essential-integral-chain systems with matched uncertainties. It is noticed that systems with nonintegral-chain form and mismatched uncertainties are more general and widely exist in practical engineering systems, where the standard ESOBC method is no longer available. To this end, it is imperative to explore new ESOBC approach for these systems to extend its applicability. By appropriately choosing a disturbance compensation gain, a generalized ESOBC (GESOBC) method is proposed for nonintegral-chain systems subject to mismatched uncertainties without any coordinate transformations. The proposed method is able to extend to multi-input-multi-output systems with almost no modification. Both numerical and application design examples demonstrate the feasibility and efficacy of the proposed method

Generalized Extended State Observer Based Control for Systems With Mismatched Uncertainties

This article was published in the journal IEEE Transactions on Industrial Electronics [© IEEE]. The definitive version is available at: http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6117083. © 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.The standard extended state observer based control (ESOBC) method is only applicable for a class of single-input-single-output essential-integral-chain systems with matched uncertainties. It is noticed that systems with nonintegral-chain form and mismatched uncertainties are more general and widely exist in practical engineering systems, where the standard ESOBC method is no longer available. To this end, it is imperative to explore new ESOBC approach for these systems to extend its applicability. By appropriately choosing a disturbance compensation gain, a generalized ESOBC (GESOBC) method is proposed for nonintegral-chain systems subject to mismatched uncertainties without any coordinate transformations. The proposed method is able to extend to multi-input-multi-output systems with almost no modification. Both numerical and application design examples demonstrate the feasibility and efficacy of the proposed method

An ADRC-based control strategy for FRT improvement of wind power generation with a doubly-fed induction generator

This paper proposes a second-order active disturbance rejection control (ADRC)-based control strategy with an integrated design of the flux damping method, for the fault ride-through (FRT) improvement in wind power generation systems with a doubly-fed induction generator (DFIG). First, a first principles model of the rotor and grid side converter of DFIG is developed, which is then used to theoretically analyze the system characteristics and show the damage caused to the DFIG system by a grid voltage fault. Then, the flux damping method is used to suppress the rotor current during a fault ride-through. In order to enhance the robustness and effectiveness of the flux damping method under complex working conditions, an ADRC approach is proposed for disturbance attenuation of the DFIG systems. Finally, a comparison of the proposed method with three other control approaches on a 1.5-MV DFIG system benchmark is performed. It is shown that the proposed method can adaptively and effectively improve the system performance during an FRT

Analyse und Entwurf von Beobachtern mit unbekannten Signalen und Parametern

Die Arbeit sondiert Erweiterungsmöglichkeiten von Beobachterverfahren und zeigt Lösungen für die Fälle auf, in denen die üblichen Voraussetzungen wie Beobachtbarkeit, bekannte Parameter und vollständige Messbarkeit von Ein- und Ausgangssignalen verletzt sind