Active learning based laboratory towards engineering education 4.0

Universities have a relevant and essential key role to ensure knowledge and development of competencies in the current fourth industrial revolution called Industry 4.0. The Industry 4.0 promotes a set of digital technologies to allow the convergence between the information technology and the operation technology towards smarter factories. Under such new framework, multiple initiatives are being carried out worldwide as response of such evolution, particularly, from the engineering education point of view. In this regard, this paper introduces the initiative that is being carried out at the Technical University of Catalonia, Spain, called Industry 4.0 Technologies Laboratory, I4Tech Lab. The I4Tech laboratory represents a technological environment for the academic, research and industrial promotion of related technologies. First, in this work, some of the main aspects considered in the definition of the so called engineering education 4.0 are discussed. Next, the proposed laboratory architecture, objectives as well as considered technologies are explained. Finally, the basis of the proposed academic method supported by an active learning approach is presented.Postprint (published version

The robot programming network

The Robot Programming Network (RPN) is an initiative for creating a network of robotics education laboratories with remote programming capabilities. It consists of both online open course materials and online servers that are ready to execute and test the programs written by remote students. Online materials include introductory course modules on robot programming, mobile robotics and humanoids, aimed to learn from basic concepts in science, technology, engineering, and mathematics (STEM) to more advanced programming skills. The students have access to the online server hosts, where they submit and run their programming code on the fly. The hosts run a variety of robot simulation environments, and access to real robots can also be granted, upon successful achievement of the course modules. The learning materials provide step-by-step guidance for solving problems with increasing level of dif- ficulty. Skill tests and challenges are given for checking the success, and online competitions are scheduled for additional motivation and fun. Use of standard robotics middleware (ROS) allows the system to be extended to a large number of robot platforms, and connected to other existing tele-laboratories for building a large social network for online teaching of robotics.Support of IEEE RAS through the CEMRA program (Creation of Educational Material for Robotics and Automation) is gratefully acknowledged. This paper describes research done at the Robotic Intelligence Laboratory. Support for this laboratory is provided in part by Ministerio de Economia y Competitividad (DPI2011-27846), by Generalitat Valenciana (PROMETEOII/2014/028) and by Universitat Jaume I (P1-1B2011-54)

The impact of blended learning in improving the reaction, achievement and return on investment of industrial automation training

There has been a significant increase in the level of remote or distance learning using the Internet, often referred to as e-learning or online education. E-learning is often combined with classroom instruction and on-the-job training and this is referred to as blended learning. The purpose of this research is to investigate the impact blended learning has in improving engineering training in the engineering field of industrial automation. This is especially in improving the reaction, achievement and return on investment of learners compared to that of only the traditional classroom or e-learning approaches. One of the gaps in current research is the examination of the impact of blended learning in improving engineering training. The research revealed significant growth in the use of e-learning for engineers and technicians. There would however appear to be a large number of engineers and technicians who were disappointed with their experiences of e-learning. Significant concerns were also identified in the efficacy of e-learning and the lack of hands-on experience in this form of training for engineers and technicians. Suggestions are made as a result of the research into addressing these issues

SARSCEST (human factors)

People interact with the processes and products of contemporary technology. Individuals are affected by these in various ways and individuals shape them. Such interactions come under the label 'human factors'. To expand the understanding of those to whom the term is relatively unfamiliar, its domain includes both an applied science and applications of knowledge. It means both research and development, with implications of research both for basic science and for development. It encompasses not only design and testing but also training and personnel requirements, even though some unwisely try to split these apart both by name and institutionally. The territory includes more than performance at work, though concentration on that aspect, epitomized in the derivation of the term ergonomics, has overshadowed human factors interest in interactions between technology and the home, health, safety, consumers, children and later life, the handicapped, sports and recreation education, and travel. Two aspects of technology considered most significant for work performance, systems and automation, and several approaches to these, are discussed

Remote laboratories: new technology and standard based architecture

E-Laboratories are important components of e- learning environments, especially in scientific and technical disciplines. First widespread E-Labs consisted in proposing simulations of real systems (virtual labs), as building remote labs (remote control of real systems) was difficult by lack of industrial standards and common protocols. Nowadays, robotics and automation technologies make easier the interfacing of systems with computers. In this frame, many researchers (such as those mentioned in [1]) focus on how to set up such a remote control. But, only a few of them deal with the educational point of view of the problem. This paper outlines our current research and reflection about remote laboratory modelling

Load flow studies on stand alone microgrid system in Ranau, Sabah

This paper presents the power flow or load flow analysis of Ranau microgrid, a standalone microgrid in the district of Ranau,West Coast Division of Sabah. Power flow for IEEE 9 bus also performed and analyzed. Power flow is define as an important tool involving numerical analysis applied to power system. Power flow uses simplified notation such as one line diagram and per-unit system focusing on voltages, voltage angles, real power and reactive power. To achieved that purpose, this research is done by analyzing the power flow analysis and calculation of all the elements in the microgrid such as generators, buses, loads, transformers, transmission lines using the Power Factory DIGSilent 14 software to calculate the power flow. After the analysis and calculations, the results were analysed and compared

Analysis of a thermal system through remote laboratories

This paper describes the experiences using remote laboratories for thorough analysis of a thermal system, including disturbances. Remote laboratories for education in subjects of control, is a common resorted method, used by universities. This method is applied to offer a flexible service in schedules so as to obtain greater and better results of available resources. Remote laboratories have been used for controlling physical devices remotely. Furthermore, remote labs have been used for transfer function identification of real equipment. Nevertheless, remote analyses of disturbances have not been done. The aim of this contribution is thereby to apply the experience of remote laboratories in the study of disturbances. Some experiments are carried out to demonstrate the effectiveness in using remote laboratories for complete analysis of a thermal system. Considering the remote access to thermal system, “Sistema de Laboratorios a Distancia” (SLD) was used

NASA space station automation: AI-based technology review

Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures

Computer- and robot-assisted Medical Intervention

Medical robotics includes assistive devices used by the physician in order to make his/her diagnostic or therapeutic practices easier and more efficient. This chapter focuses on such systems. It introduces the general field of Computer-Assisted Medical Interventions, its aims, its different components and describes the place of robots in that context. The evolutions in terms of general design and control paradigms in the development of medical robots are presented and issues specific to that application domain are discussed. A view of existing systems, on-going developments and future trends is given. A case-study is detailed. Other types of robotic help in the medical environment (such as for assisting a handicapped person, for rehabilitation of a patient or for replacement of some damaged/suppressed limbs or organs) are out of the scope of this chapter.Comment: Handbook of Automation, Shimon Nof (Ed.) (2009) 000-00

Enabling peer-to-peer remote experimentation in distributed online remote laboratories

Remote Access Laboratories (RALs) are online platforms that allow human user interaction with physical instruments over the Internet. Usually RALs follow a client-server paradigm. Dedicated providers create and maintain experiments and corresponding educational content. In contrast, this dissertation focuses on a Peer-to-Peer (P2P) service model for RALs where users are encouraged to host experiments at their location. This approach can be seen as an example of an Internet of Things (IoT) system. A set of smart devices work together providing a cyber-physical interface for users to run experiments remotely via the Internet. The majority of traditional RAL learning activities focus on undergraduate education where hands-on experience such as building experiments, is not a major focus. In contrast this work is motivated by the need to improve Science, Technology, Engineering and Mathematics (STEM) education for school-aged children. Here physically constructing experiments forms a substantial part of the learning experience. In the proposed approach, experiments can be designed with relatively simple components such as LEGO Mindstorms or Arduinos. The user interface can be programed using SNAP!, a graphical programming tool. While the motivation for the work is educational in nature, this thesis focuses on the technical details of experiment control in an opportunistic distributed environment. P2P RAL aims to enable any two random participants in the system - one in the role of maker creating and hosting an experiment and one in the role of learner using the experiment - to establish a communication session during which the learner runs the remote experiment through the Internet without requiring a centralized experiment or service provider. The makers need to have support to create the experiment according to a common web based programing interface. Thus, the P2P approach of RALs requires an architecture that provides a set of heterogeneous tools which can be used by makers to create a wide variety of experiments. The core contribution of this dissertation is an automaton-based model (twin finite state automata) of the controller units and the controller interface of an experiment. This enables the creation of experiments based on a common platform, both in terms of software and hardware. This architecture enables further development of algorithms for evaluating and supporting the performance of users which is demonstrated through a number of algorithms. It can also ensure the safety of instruments with intelligent tools. The proposed network architecture for P2P RALs is designed to minimise latency to improve user satisfaction and learning experience. As experiment availability is limited for this approach of RALs, novel scheduling strategies are proposed. Each of these contributions has been validated through either simulations, e.g. in case of network architecture and scheduling, or test-bed implementations, in case of the intelligent tools. Three example experiments are discussed along with users' feedback on their experience of creating an experiment and using others’ experimental setup. The focus of the thesis is mainly on the design and hosting of experiments and ensuring user accessibility to them. The main contributions of this thesis are in regards to machine learning and data mining techniques applied to IoT systems in order to realize the P2P RALs system. This research has shown that a P2P architecture of RALs can provide a wide variety of experimental setups in a modular environment with high scalability. It can potentially enhance the user-learning experience while aiding the makers of experiments. It presents new aspects of learning analytics mechanisms to monitor and support users while running experiments, thus lending itself to further research. The proposed mathematical models are also applicable to other Internet of Things applications