Texture and Colour in Image Analysis

Research in colour and texture has experienced major changes in the last few years. This book presents some recent advances in the field, specifically in the theory and applications of colour texture analysis. This volume also features benchmarks, comparative evaluations and reviews

UAVs for the Environmental Sciences

This book gives an overview of the usage of UAVs in environmental sciences covering technical basics, data acquisition with different sensors, data processing schemes and illustrating various examples of application

Modélisation tridimensionnelle précise de l'environnement à l’aide des systèmes de photogrammétrie embarqués sur drones

Abstract : Images acquired from unmanned aerial vehicles (UAVs) can provide data with unprecedented spatial and temporal resolution for three-dimensional (3D) modeling. Solutions developed for this purpose are mainly operating based on photogrammetry concepts, namely UAV-Photogrammetry Systems (UAV-PS). Such systems are used in applications where both geospatial and visual information of the environment is required. These applications include, but are not limited to, natural resource management such as precision agriculture, military and police-related services such as traffic-law enforcement, precision engineering such as infrastructure inspection, and health services such as epidemic emergency management. UAV-photogrammetry systems can be differentiated based on their spatial characteristics in terms of accuracy and resolution. That is some applications, such as precision engineering, require high-resolution and high-accuracy information of the environment (e.g. 3D modeling with less than one centimeter accuracy and resolution). In other applications, lower levels of accuracy might be sufficient, (e.g. wildlife management needing few decimeters of resolution). However, even in those applications, the specific characteristics of UAV-PSs should be well considered in the steps of both system development and application in order to yield satisfying results. In this regard, this thesis presents a comprehensive review of the applications of unmanned aerial imagery, where the objective was to determine the challenges that remote-sensing applications of UAV systems currently face. This review also allowed recognizing the specific characteristics and requirements of UAV-PSs, which are mostly ignored or not thoroughly assessed in recent studies. Accordingly, the focus of the first part of this thesis is on exploring the methodological and experimental aspects of implementing a UAV-PS. The developed system was extensively evaluated for precise modeling of an open-pit gravel mine and performing volumetric-change measurements. This application was selected for two main reasons. Firstly, this case study provided a challenging environment for 3D modeling, in terms of scale changes, terrain relief variations as well as structure and texture diversities. Secondly, open-pit-mine monitoring demands high levels of accuracy, which justifies our efforts to improve the developed UAV-PS to its maximum capacities. The hardware of the system consisted of an electric-powered helicopter, a high-resolution digital camera, and an inertial navigation system. The software of the system included the in-house programs specifically designed for camera calibration, platform calibration, system integration, onboard data acquisition, flight planning and ground control point (GCP) detection. The detailed features of the system are discussed in the thesis, and solutions are proposed in order to enhance the system and its photogrammetric outputs. The accuracy of the results was evaluated under various mapping conditions, including direct georeferencing and indirect georeferencing with different numbers, distributions and types of ground control points. Additionally, the effects of imaging configuration and network stability on modeling accuracy were assessed. The second part of this thesis concentrates on improving the techniques of sparse and dense reconstruction. The proposed solutions are alternatives to traditional aerial photogrammetry techniques, properly adapted to specific characteristics of unmanned, low-altitude imagery. Firstly, a method was developed for robust sparse matching and epipolar-geometry estimation. The main achievement of this method was its capacity to handle a very high percentage of outliers (errors among corresponding points) with remarkable computational efficiency (compared to the state-of-the-art techniques). Secondly, a block bundle adjustment (BBA) strategy was proposed based on the integration of intrinsic camera calibration parameters as pseudo-observations to Gauss-Helmert model. The principal advantage of this strategy was controlling the adverse effect of unstable imaging networks and noisy image observations on the accuracy of self-calibration. The sparse implementation of this strategy was also performed, which allowed its application to data sets containing a lot of tie points. Finally, the concepts of intrinsic curves were revisited for dense stereo matching. The proposed technique could achieve a high level of accuracy and efficiency by searching only through a small fraction of the whole disparity search space as well as internally handling occlusions and matching ambiguities. These photogrammetric solutions were extensively tested using synthetic data, close-range images and the images acquired from the gravel-pit mine. Achieving absolute 3D mapping accuracy of 11±7 mm illustrated the success of this system for high-precision modeling of the environment.Résumé : Les images acquises à l’aide d’aéronefs sans pilote (ASP) permettent de produire des données de résolutions spatiales et temporelles uniques pour la modélisation tridimensionnelle (3D). Les solutions développées pour ce secteur d’activité sont principalement basées sur des concepts de photogrammétrie et peuvent être identifiées comme des systèmes photogrammétriques embarqués sur aéronefs sans pilote (SP-ASP). Ils sont utilisés dans plusieurs applications environnementales où l’information géospatiale et visuelle est essentielle. Ces applications incluent notamment la gestion des ressources naturelles (ex. : agriculture de précision), la sécurité publique et militaire (ex. : gestion du trafic), les services d’ingénierie (ex. : inspection de bâtiments) et les services de santé publique (ex. : épidémiologie et gestion des risques). Les SP-ASP peuvent être subdivisés en catégories selon les besoins en termes de précision et de résolution. En effet, dans certains cas, tel qu’en ingénierie, l’information sur l’environnement doit être de haute précision et de haute résolution (ex. : modélisation 3D avec une précision et une résolution inférieure à un centimètre). Pour d’autres applications, tel qu’en gestion de la faune sauvage, des niveaux de précision et de résolution moindres peut être suffisants (ex. : résolution de l’ordre de quelques décimètres). Cependant, même dans ce type d’applications les caractéristiques des SP-ASP devraient être prises en considération dans le développement des systèmes et dans leur utilisation, et ce, pour atteindre les résultats visés. À cet égard, cette thèse présente une revue exhaustive des applications de l’imagerie aérienne acquise par ASP et de déterminer les challenges les plus courants. Cette étude a également permis d’établir les caractéristiques et exigences spécifiques des SP-ASP qui sont généralement ignorées ou partiellement discutées dans les études récentes. En conséquence, la première partie de cette thèse traite des aspects méthodologiques et d’expérimentation de la mise en place d’un SP-ASP. Le système développé a été évalué pour la modélisation précise d’une gravière et utilisé pour réaliser des mesures de changement volumétrique. Cette application a été retenue pour deux raisons principales. Premièrement, ce type de milieu fournit un environnement difficile pour la modélisation, et ce, en termes de changement d’échelle, de changement de relief du terrain ainsi que la grande diversité de structures et de textures. Deuxièment, le suivi de mines à ciel ouvert exige un niveau de précision élevé, ce qui justifie les efforts déployés pour mettre au point un SP-ASP de haute précision. Les composantes matérielles du système consistent en un ASP à propulsion électrique de type hélicoptère, d’une caméra numérique à haute résolution ainsi qu’une station inertielle. La composante logicielle est composée de plusieurs programmes développés particulièrement pour calibrer la caméra et la plateforme, intégrer les systèmes, enregistrer les données, planifier les paramètres de vol et détecter automatiquement les points de contrôle au sol. Les détails complets du système sont abordés dans la thèse et des solutions sont proposées afin d’améliorer le système et la qualité des données photogrammétriques produites. La précision des résultats a été évaluée sous diverses conditions de cartographie, incluant le géoréférencement direct et indirect avec un nombre, une répartition et des types de points de contrôle variés. De plus, les effets de la configuration des images et la stabilité du réseau sur la précision de la modélisation ont été évalués. La deuxième partie de la thèse porte sur l’amélioration des techniques de reconstruction éparse et dense. Les solutions proposées sont des alternatives aux techniques de photogrammétrie aérienne traditionnelle et adaptée aux caractéristiques particulières de l’imagerie acquise à basse altitude par ASP. Tout d’abord, une méthode robuste de correspondance éparse et d’estimation de la géométrie épipolaire a été développée. L’élément clé de cette méthode est sa capacité à gérer le pourcentage très élevé des valeurs aberrantes (erreurs entre les points correspondants) avec une efficacité de calcul remarquable en comparaison avec les techniques usuelles. Ensuite, une stratégie d’ajustement de bloc basée sur l’intégration de pseudoobservations du modèle Gauss-Helmert a été proposée. Le principal avantage de cette stratégie consistait à contrôler les effets négatifs du réseau d’images instable et des images bruitées sur la précision de l’autocalibration. Une implémentation éparse de cette stratégie a aussi été réalisée, ce qui a permis de traiter des jeux de données contenant des millions de points de liaison. Finalement, les concepts de courbes intrinsèques ont été revisités pour l’appariement stéréo dense. La technique proposée pourrait atteindre un haut niveau de précision et d’efficacité en recherchant uniquement dans une petite portion de l’espace de recherche des disparités ainsi qu’en traitant les occlusions et les ambigüités d’appariement. Ces solutions photogrammétriques ont été largement testées à l’aide de données synthétiques, d’images à courte portée ainsi que celles acquises sur le site de la gravière. Le système a démontré sa capacité a modélisation dense de l’environnement avec une très haute exactitude en atteignant une précision 3D absolue de l’ordre de 11±7 mm

Spatial Analysis for Landscape Changes

Recent increasing trends of the occurrence of natural and anthropic processes have a strong impact on landscape modification, and there is a growing need for the implementation of effective instruments, tools, and approaches to understand and manage landscape changes. A great improvement in the availability of high-resolution DEMs, GIS tools, and algorithms of automatic extraction of landform features and change detections has favored an increase in the analysis of landscape changes, which became an essential instrument for the quantitative evaluation of landscape changes in many research fields. One of the most effective ways of investigating natural landscape changes is the geomorphological one, which benefits from recent advances in the development of digital elevation model (DEM) comparison software and algorithms, image change detection, and landscape evolution models. This Special Issue collects six papers concerning the application of traditional and innovative multidisciplinary methods in several application fields, such as geomorphology, urban and territorial systems, vegetation restoration, and soil science. The papers include multidisciplinary studies that highlight the usefulness of quantitative analyses of satellite images and UAV-based DEMs, the application of Landscape Evolution Models (LEMs) and automatic landform classification algorithms to solve multidisciplinary issues of landscape changes. A review article is also presented, dealing with the bibliometric analysis of the research topic

An Evolutionary Approach to Adaptive Image Analysis for Retrieving and Long-term Monitoring Historical Land Use from Spatiotemporally Heterogeneous Map Sources

Land use changes have become a major contributor to the anthropogenic global change. The ongoing dispersion and concentration of the human species, being at their orders unprecedented, have indisputably altered Earth’s surface and atmosphere. The effects are so salient and irreversible that a new geological epoch, following the interglacial Holocene, has been announced: the Anthropocene. While its onset is by some scholars dated back to the Neolithic revolution, it is commonly referred to the late 18th century. The rapid development since the industrial revolution and its implications gave rise to an increasing awareness of the extensive anthropogenic land change and led to an urgent need for sustainable strategies for land use and land management. By preserving of landscape and settlement patterns at discrete points in time, archival geospatial data sources such as remote sensing imagery and historical geotopographic maps, in particular, could give evidence of the dynamic land use change during this crucial period. In this context, this thesis set out to explore the potentials of retrospective geoinformation for monitoring, communicating, modeling and eventually understanding the complex and gradually evolving processes of land cover and land use change. Currently, large amounts of geospatial data sources such as archival maps are being worldwide made online accessible by libraries and national mapping agencies. Despite their abundance and relevance, the usage of historical land use and land cover information in research is still often hindered by the laborious visual interpretation, limiting the temporal and spatial coverage of studies. Thus, the core of the thesis is dedicated to the computational acquisition of geoinformation from archival map sources by means of digital image analysis. Based on a comprehensive review of literature as well as the data and proposed algorithms, two major challenges for long-term retrospective information acquisition and change detection were identified: first, the diversity of geographical entity representations over space and time, and second, the uncertainty inherent to both the data source itself and its utilization for land change detection. To address the former challenge, image segmentation is considered a global non-linear optimization problem. The segmentation methods and parameters are adjusted using a metaheuristic, evolutionary approach. For preserving adaptability in high level image analysis, a hybrid model- and data-driven strategy, combining a knowledge-based and a neural net classifier, is recommended. To address the second challenge, a probabilistic object- and field-based change detection approach for modeling the positional, thematic, and temporal uncertainty adherent to both data and processing, is developed. Experimental results indicate the suitability of the methodology in support of land change monitoring. In conclusion, potentials of application and directions for further research are given

Autonomisten metsäkoneiden koneaistijärjestelmät

A prerequisite for increasing the autonomy of forest machinery is to provide robots with digital situational awareness, including a representation of the surrounding environment and the robot's own state in it. Therefore, this article-based dissertation proposes perception systems for autonomous or semi-autonomous forest machinery as a summary of seven publications. The work consists of several perception methods using machine vision, lidar, inertial sensors, and positioning sensors. The sensors are used together by means of probabilistic sensor fusion. Semi-autonomy is interpreted as a useful intermediary step, situated between current mechanized solutions and full autonomy, to assist the operator. In this work, the perception of the robot's self is achieved through estimation of its orientation and position in the world, the posture of its crane, and the pose of the attached tool. The view around the forest machine is produced with a rotating lidar, which provides approximately equal-density 3D measurements in all directions. Furthermore, a machine vision camera is used for detecting young trees among other vegetation, and sensor fusion of an actuated lidar and machine vision camera is utilized for detection and classification of tree species. In addition, in an operator-controlled semi-autonomous system, the operator requires a functional view of the data around the robot. To achieve this, the thesis proposes the use of an augmented reality interface, which requires measuring the pose of the operator's head-mounted display in the forest machine cabin. Here, this work adopts a sensor fusion solution for a head-mounted camera and inertial sensors. In order to increase the level of automation and productivity of forest machines, the work focuses on scientifically novel solutions that are also adaptable for industrial use in forest machinery. Therefore, all the proposed perception methods seek to address a real existing problem within current forest machinery. All the proposed solutions are implemented in a prototype forest machine and field tested in a forest. The proposed methods include posture measurement of a forestry crane, positioning of a freely hanging forestry crane attachment, attitude estimation of an all-terrain vehicle, positioning a head mounted camera in a forest machine cabin, detection of young trees for point cleaning, classification of tree species, and measurement of surrounding tree stems and the ground surface underneath.Metsäkoneiden autonomia-asteen kasvattaminen edellyttää, että robotilla on digitaalinen tilannetieto sekä ympäristöstä että robotin omasta toiminnasta. Tämän saavuttamiseksi työssä on kehitetty autonomisen tai puoliautonomisen metsäkoneen koneaistijärjestelmiä, jotka hyödyntävät konenäkö-, laserkeilaus- ja inertia-antureita sekä paikannusantureita. Työ liittää yhteen seitsemässä artikkelissa toteutetut havainnointimenetelmät, joissa useiden anturien mittauksia yhdistetään sensorifuusiomenetelmillä. Työssä puoliautonomialla tarkoitetaan hyödyllisiä kuljettajaa avustavia välivaiheita nykyisten mekanisoitujen ratkaisujen ja täyden autonomian välillä. Työssä esitettävissä autonomisen metsäkoneen koneaistijärjestelmissä koneen omaa toimintaa havainnoidaan estimoimalla koneen asentoa ja sijaintia, nosturin asentoa sekä siihen liitetyn työkalun asentoa suhteessa ympäristöön. Yleisnäkymä metsäkoneen ympärille toteutetaan pyörivällä laserkeilaimella, joka tuottaa lähes vakiotiheyksisiä 3D-mittauksia jokasuuntaisesti koneen ympäristöstä. Nuoret puut tunnistetaan muun kasvillisuuden joukosta käyttäen konenäkökameraa. Lisäksi puiden tunnistamisessa ja puulajien luokittelussa käytetään konenäkökameraa ja laserkeilainta yhdessä sensorifuusioratkaisun avulla. Lisäksi kuljettajan ohjaamassa puoliautonomisessa järjestelmässä kuljettaja tarvitsee toimivan tavan ymmärtää koneen tuottaman mallin ympäristöstä. Työssä tämä ehdotetaan toteutettavaksi lisätyn todellisuuden käyttöliittymän avulla, joka edellyttää metsäkoneen ohjaamossa istuvan kuljettajan lisätyn todellisuuden lasien paikan ja asennon mittaamista. Työssä se toteutetaan kypärään asennetun kameran ja inertia-anturien sensorifuusiona. Jotta metsäkoneiden automatisaatiotasoa ja tuottavuutta voidaan lisätä, työssä keskitytään uusiin tieteellisiin ratkaisuihin, jotka soveltuvat teolliseen käyttöön metsäkoneissa. Kaikki esitetyt koneaistijärjestelmät pyrkivät vastaamaan todelliseen olemassa olevaan tarpeeseen nykyisten metsäkoneiden käytössä. Siksi kaikki menetelmät on implementoitu prototyyppimetsäkoneisiin ja tulokset on testattu metsäympäristössä. Työssä esitetyt menetelmät mahdollistavat metsäkoneen nosturin, vapaasti riippuvan työkalun ja ajoneuvon asennon estimoinnin, lisätyn todellisuuden lasien asennon mittaamisen metsäkoneen ohjaamossa, nuorten puiden havaitsemisen reikäperkauksessa, ympäröivien puiden puulajien tunnistuksen, sekä puun runkojen ja maanpinnan mittauksen

Very High Resolution (VHR) Satellite Imagery: Processing and Applications

Recently, growing interest in the use of remote sensing imagery has appeared to provide synoptic maps of water quality parameters in coastal and inner water ecosystems;, monitoring of complex land ecosystems for biodiversity conservation; precision agriculture for the management of soils, crops, and pests; urban planning; disaster monitoring, etc. However, for these maps to achieve their full potential, it is important to engage in periodic monitoring and analysis of multi-temporal changes. In this context, very high resolution (VHR) satellite-based optical, infrared, and radar imaging instruments provide reliable information to implement spatially-based conservation actions. Moreover, they enable observations of parameters of our environment at greater broader spatial and finer temporal scales than those allowed through field observation alone. In this sense, recent very high resolution satellite technologies and image processing algorithms present the opportunity to develop quantitative techniques that have the potential to improve upon traditional techniques in terms of cost, mapping fidelity, and objectivity. Typical applications include multi-temporal classification, recognition and tracking of specific patterns, multisensor data fusion, analysis of land/marine ecosystem processes and environment monitoring, etc. This book aims to collect new developments, methodologies, and applications of very high resolution satellite data for remote sensing. The works selected provide to the research community the most recent advances on all aspects of VHR satellite remote sensing

Synthetic Aperture Radar (SAR) Meets Deep Learning

This reprint focuses on the application of the combination of synthetic aperture radars and depth learning technology. It aims to further promote the development of SAR image intelligent interpretation technology. A synthetic aperture radar (SAR) is an important active microwave imaging sensor, whose all-day and all-weather working capacity give it an important place in the remote sensing community. Since the United States launched the first SAR satellite, SAR has received much attention in the remote sensing community, e.g., in geological exploration, topographic mapping, disaster forecast, and traffic monitoring. It is valuable and meaningful, therefore, to study SAR-based remote sensing applications. In recent years, deep learning represented by convolution neural networks has promoted significant progress in the computer vision community, e.g., in face recognition, the driverless field and Internet of things (IoT). Deep learning can enable computational models with multiple processing layers to learn data representations with multiple-level abstractions. This can greatly improve the performance of various applications. This reprint provides a platform for researchers to handle the above significant challenges and present their innovative and cutting-edge research results when applying deep learning to SAR in various manuscript types, e.g., articles, letters, reviews and technical reports