1,473 research outputs found
Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors
This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs
Extending and Implementing the Self-adaptive Virtual Processor for Distributed Memory Architectures
Many-core architectures of the future are likely to have distributed memory
organizations and need fine grained concurrency management to be used
effectively. The Self-adaptive Virtual Processor (SVP) is an abstract
concurrent programming model which can provide this, but the model and its
current implementations assume a single address space shared memory. We
investigate and extend SVP to handle distributed environments, and discuss a
prototype SVP implementation which transparently supports execution on
heterogeneous distributed memory clusters over TCP/IP connections, while
retaining the original SVP programming model
Hybrid static/dynamic scheduling for already optimized dense matrix factorization
We present the use of a hybrid static/dynamic scheduling strategy of the task
dependency graph for direct methods used in dense numerical linear algebra.
This strategy provides a balance of data locality, load balance, and low
dequeue overhead. We show that the usage of this scheduling in communication
avoiding dense factorization leads to significant performance gains. On a 48
core AMD Opteron NUMA machine, our experiments show that we can achieve up to
64% improvement over a version of CALU that uses fully dynamic scheduling, and
up to 30% improvement over the version of CALU that uses fully static
scheduling. On a 16-core Intel Xeon machine, our hybrid static/dynamic
scheduling approach is up to 8% faster than the version of CALU that uses a
fully static scheduling or fully dynamic scheduling. Our algorithm leads to
speedups over the corresponding routines for computing LU factorization in well
known libraries. On the 48 core AMD NUMA machine, our best implementation is up
to 110% faster than MKL, while on the 16 core Intel Xeon machine, it is up to
82% faster than MKL. Our approach also shows significant speedups compared with
PLASMA on both of these systems
MGSim - Simulation tools for multi-core processor architectures
MGSim is an open source discrete event simulator for on-chip hardware
components, developed at the University of Amsterdam. It is intended to be a
research and teaching vehicle to study the fine-grained hardware/software
interactions on many-core and hardware multithreaded processors. It includes
support for core models with different instruction sets, a configurable
multi-core interconnect, multiple configurable cache and memory models, a
dedicated I/O subsystem, and comprehensive monitoring and interaction
facilities. The default model configuration shipped with MGSim implements
Microgrids, a many-core architecture with hardware concurrency management.
MGSim is furthermore written mostly in C++ and uses object classes to represent
chip components. It is optimized for architecture models that can be described
as process networks.Comment: 33 pages, 22 figures, 4 listings, 2 table
EM2: A Scalable Shared-Memory Multicore Architecture
We introduce the Execution Migration Machine (EM2), a novel, scalable shared-memory architecture for large-scale multicores constrained by off-chip memory bandwidth. EM2 reduces cache miss rates, and consequently off-chip memory usage, by permitting only one copy of data to be stored anywhere in the system: when a thread wishes to access an address not locally cached on the core it is executing on, it migrates to the appropriate core and continues execution. Using detailed simulations of a range of 256-core configurations on the SPLASH-2 benchmark suite, we show that EM2 improves application completion times by 18% on the average while remaining competitive with traditional architectures in silicon area
Operating System Support for Redundant Multithreading
Failing hardware is a fact and trends in microprocessor design indicate that the fraction of hardware suffering from permanent and transient faults will continue to increase in future chip generations. Researchers proposed various solutions to this issue with different downsides: Specialized hardware components make hardware more expensive in production and consume additional energy at runtime. Fault-tolerant algorithms and libraries enforce specific programming models on the developer. Compiler-based fault tolerance requires the source code for all applications to be available for recompilation. In this thesis I present ASTEROID, an operating system architecture that integrates applications with different reliability needs.
ASTEROID is built on top of the L4/Fiasco.OC microkernel and extends the system with Romain, an operating system service that transparently replicates user applications. Romain supports single- and multi-threaded applications without requiring access to the application's source code. Romain replicates applications and their resources completely and thereby does not rely on hardware extensions, such as ECC-protected memory. In my thesis I describe how to efficiently implement replication as a form of redundant multithreading in software. I develop mechanisms to manage replica resources and to make multi-threaded programs behave deterministically for replication.
I furthermore present an approach to handle applications that use shared-memory channels with other programs. My evaluation shows that Romain provides 100% error detection and more than 99.6% error correction for single-bit flips in memory and general-purpose registers. At the same time, Romain's execution time overhead is below 14% for single-threaded applications running in triple-modular redundant mode. The last part of my thesis acknowledges that software-implemented fault tolerance methods often rely on the correct functioning of a certain set of hardware and software components, the Reliable Computing Base (RCB).
I introduce the concept of the RCB and discuss what constitutes the RCB of the ASTEROID system and other fault tolerance mechanisms. Thereafter I show three case studies that evaluate approaches to protecting RCB components and thereby aim to achieve a software stack that is fully protected against hardware errors
Out-of-Order Retirement of Instructions in Superscalar, Multithreaded, and Multicore Processors
Los procesadores superescalares actuales utilizan un reorder buffer (ROB) para contabilizar las instrucciones en vuelo. El ROB se implementa como una cola FIFO first in first out en la que las instrucciones se insertan en orden de programa después de ser decodificadas, y de la que se extraen también en orden de programa en la etapa commit. El uso de esta estructura proporciona un soporte simple para la especulación, las excepciones precisas y la reclamación de registros. Sin embargo, el hecho de retirar instrucciones en orden puede degradar las prestaciones si una operación de alta latencia está bloqueando la cabecera del ROB. Varias propuestas se han publicado atacando este problema. La mayorÃa utiliza retirada de instrucciones fuera de orden de forma especulativa, requiriendo almacenar puntos de recuperación (checkpoints) para restaurar un estado válido del procesador ante un fallo de especulación. Normalmente, los checkpoints necesitan implementarse con estructuras hardware costosas, y además requieren un crecimiento de otras estructuras del procesador, lo cual a su vez puede impactar en el tiempo de ciclo de reloj. Este problema afecta a muchos tipos de procesadores actuales, independientemente del número de hilos hardware (threads) y del número de núcleos de cómputo (cores) que incluyan. Esta tesis abarca el estudio de la retirada no especulativa de instrucciones fuera de orden en procesadores superescalares, multithread y multicore.Ubal Tena, R. (2010). Out-of-Order Retirement of Instructions in Superscalar, Multithreaded, and Multicore Processors [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8535Palanci
- …