High Efficiency Cross-Coupled Charge Pump Circuit with Four-Clock Signals

© Allerton Press, Inc. 2018A fully integrated cross-coupled charge pump circuit for boosting dc-to-dc converter applications with four-clock signals has been proposed. With the new clock scheme, this charge pump eliminates all of the reversion power loss and reduces the ripple voltage. In addition, the largest voltage differences between the terminals of all transistors do not exceed the power supply voltage for solving the gate-oxide overstress problem in the conventional charge pump circuits and enhancing the reliability. This proposed charge pump circuit does not require any extra level shifter; therefore, the power efficiency is increased. The proposed charge pump circuit has been simulated using Spectre in the TSMC 0.18 μm CMOS process. The simulation results show that the maximum voltage conversion efficiency of the new 3-stage cross-coupled circuit with an input voltage of 1.5Vis 99.8%. According to the comparison results of the conventional pump and the enhanced charge pump proposed, the output ripple voltage has been significantly reduced.Peer reviewe

A robust high-efficiency cross-coupled charge pump circuit without blocking transistors

This document is the Accepted Manuscript version of the following article: Minglin Ma, Xinglong Cai, Yichuang Sun, and Nike George, ‘A robust high-efficiency cross-coupled charge pump circuit without blocking transistors’, Analog Integrated Circuits and Signal Processing, Vol. 95 (3): 395-401, June 2018. Under embargo until 16 March 2019. The final publication is available at Springer via: https://doi.org/10.1007/s10470-018-1149-xA fully integrated cross-coupled charge pump circuit with a new clock scheme has been presented in this paper. The new clock scheme ensures that all NMOS pre-charge transistors are turned off when the voltages of main clock signals are high. Notably, all PMOS transfer transistors will be turned off when the voltages of the main clock signals are low. As a result, the charge pump eliminates all of the reversion power loss and reduces the ripple voltage. The proposed charge pump has a better performance even in scenarios where the main clock signals are mismatched. The proposed charge pump circuit was simulated using spectre in the TSMC 0.18 µm CMOS process. The simulation results show that the proposed charge pump circuit has a high voltage conversion efficiency and low ripple voltage.Peer reviewe

A high-efficiency and compact charge pump with charge recycling scheme and finger boost capacitor

A 16-phase 8-branch charge pump with finger boost capacitor is proposed to increase the power efficiency. Compared with the standard capacitor, the finger capacitor can significantly reduce the parasitic capacitance. The proposed four-stage charge pump with finger capacitor can achieve 14.2 V output voltage from a 3 V power supply. The finger capacitor can increase the power efficiency of the charge pump to 60.5% and save chip area as well

A High Efficiency and Low Ripple Cross-Coupled Charge Pump Circuit

A fully integrated cross-coupled charge pump circuit with four-clock signals and a new method of body bias have been proposed. The new clock scheme eliminates all of the reversion power loss and reduces the ripple voltage. In addition, the largest voltage differences between the terminals of all transistors do not exceed the supply voltage. We have also solved the gate-oxide overstress problem in the conventional charge pump circuits and enhanced the reliability. The proposed charge pump circuit has been simulated using Spectre and in the TSMC 0.18um CMOS process. The simulation results show that the maximum voltage conversion efficiency of the new 3-stage cross-coupled circuit with an input voltage of 1.5V is 99.8%. Moreover, the output ripple voltage has been significantly reduced.Peer reviewe

Statistics of an adiabatic charge pump

We investigate the effect of time-dependent cyclic-adiabatic driving on the charge transport in quantum junction. We propose a nonequilibrium Greens function formalism to study statistics of the charge pumped (at zero bias) through the junction. The formulation is used to demonstrate charge pumping in a single electronic level coupled to two (electronic) reservoirs with time dependent couplings. Analytical expression for the average pumped current for a general cyclic driving is derived. It is found that for zero bias, for a certain class of driving, the Berry phase contributes only to the odd cumulants. To contrast, a quantum master equation formulation does not show Berry-phase effect at all

An Evaluation of 2-phase Charge Pump Topologies with Charge Transfer Switches for Green Mobile Technology

The development of charge pumps has been motivated by the power supply requirements of portable electronic devices. Charge pumps are inductorless DC-DC converters that are small size and high integration. The quality of the charge pump greatly depends on the effectiveness of switches to turn on and off at the designated clock phases. However, to date, no analysis has been carried out on the overall performance of charge pumps based on switch components in practice. This work demonstrates the characteristics of transistors as charge transfer switches and their effects on the performance of a charge pump. Three most common charge pump topologies are evaluated in terms of voltage drop due to on-resistance and charge loss per switch. Simulations are performed in 0.35μm Austriamicrosystems (AMS) technology for Dickson, Voltage Doubler and Makowski charge pump topologies in steady and dynamic states. In addition, the effect of switch parameters for different charge pump topologies are compared and analysed. We demonstrate that the Makowski charge pump is the topology for future green mobile technology

Geometric Landau-Zener interferometry in a superconducting charge pump

We propose a new type of interferometry, based on geometric phases accumulated by a periodically driven two-level system undergoing multiple Landau-Zener transitions. As a specific example, we study its implementation in a superconducting charge pump. We find that interference patterns appear as a function of the pumping frequency and the phase bias, and clearly manifest themselves in the pumped charge. We also show that the effects described should persist in the presence of realistic decoherence.Comment: 5 pages, 3 figure