A Non-Isotropic Model for Mobile-to-Mobile Fading Channel Simulations

Accurate modeling of the mobile-to-mobile fading channel is critical not only to physical layer transceiver design but also to the design and performance of link and network layers. A two-dimensional nonisotropic scattering model is developed in this paper, which adopts the von Mises probability density function for the angle of departure surrounding the transmitter and the angle of arrival surrounding the receiver. This model includes the isotropic scattering channel and the base-to-mobile channel as special cases. An efficient computer simulation model is also developed to generate the non-isotropic scattering channel impulse responses. Statistical properties of the non-isotropic mobile-to-mobile channels are analyzed in comparison to the isotropic channels and the base-to-mobile channels

Stochastic Signal Processing and Power Control for Wireless Communication Systems

This dissertation is concerned with dynamical modeling, estimation and identification of wireless channels from received signal measurements. Optimal power control algorithms, mobile location and velocity estimation methods are developed based on the proposed models. The ultimate performance limits of any communication system are determined by the channel it operates in. In this dissertation, we propose new stochastic wireless channel models which capture both the space and time variations of wireless systems. The proposed channel models are based on stochastic differential equations (SDEs) driven by Brownian motions. These models are more realistic than the time invariant models encountered in the literature which do not capture and track the time varying characteristics of the propagation environment. The statistics of the proposed models are shown to be time varying, and converge in steady state to their static counterparts. Cellular and ad hoc wireless channel models are developed. In urban propagation environment, the parameters of the channel models can be determined from approximating the band-limited Doppler power spectral density (DPSD) by rational transfer functions. However, since the DPSD is not available on-line, a filterbased expectation maximization algorithm and Kalman filter to estimate the channel parameters and states, respectively, are proposed. The algorithm is recursive allowing the inphase and quadrature components and parameters to be estimated on-line from received signal measurements. The algorithms are tested using experimental data, and the results demonstrate the method’s viability for both cellular and ad hoc networks. Power control increases system capacity and quality of communications, and reduces battery power consumption. A stochastic power control algorithm is developed using the so-called predictable power control strategies. An iterative distributed algorithm is then deduced using stochastic approximations. The latter only requires each mobile to know its received signal to interference ratio at the receiver

Measurement, Modeling, and OFDM Synchronization for the Wideband Mobile-to-Mobile Channel

Wideband measurements of the mobile-to-mobile channel, especially of the harshest channels, are necessary for proper design and certification testing of mobile-to-mobile communications systems. A complete measurement implies that the Doppler and delay characteristics are measured jointly. However, such measurements have not previously been published. The main objective of the proposed research is to develop channel models for specific scenarios from data obtained in a wideband mobile-to-mobile measurement campaign in the 5.9 GHz frequency band. For this purpose we developed a channel sounding system including a novel combined waveform. In order to quantify and qualify either the recorded channel or the proposed generated channel, we developed a simulation test-bed that includes all the characteristics of the proposed digital short range communications (DSRC) standard. The resulting channel models needed to comply with the specifications required by hardware channel emulators or software channel simulators. From the obtained models, we selected one to be included in the IEEE 802.11p standard certification test. To further aid in the development of software radio based receivers, we also developed an orthogonal frequency division multiplexing (OFDM) synchronization algorithm to analyze and compensate synchronization errors produced by inaccessible system clocks.Ph.D.Committee Chair: Ingram, Mary Ann; Committee Member: Lanterman, Aaron; Committee Member: Li, Ye; Committee Member: Pratt, Thomas G.; Committee Member: Rogers, Peter H

MIMO channel modelling and simulation for cellular and mobile-to-mobile

Recently, mobile-to-mobile (M2M) communications have received much attention due to several emerging applications, such as wireless mobile ad hoc networks, relay-based cellular networks, and dedicated short range communications (DSRC) for intelligent transportation systems (e.g., IEEE 802.11p standard). Different from conventional fixed-to-mobile (F2M) cellular systems, in M2M systems both the transmitter (Tx) and receiver (Rx) are in motion and often equipped with low elevation antennas. Multiple-input-multiple-output (MIMO) technologies, employing multiple antennas at both the Tx and Rx, have widely been adopted for the third generation (3G) and beyond-3G (B3G) F2M cellular systems due to their potential benefits of improving coverage, link reliability, and overall system capacity. More recently, MIMO has been receiving more and more attention for M2M systems as well. Reliable knowledge of the propagation channel obtained from channel measurements and corresponding channel models serve as the enabling foundation for the design and analysis of MIMO F2M and M2M systems. Furthermore, the development of accurate MIMO F2M and M2M channel simulation models plays a major role in the practical simulation and performance evaluation of these systems. These form the primary motivation behind our research on MIMO channel modelling and simulation for F2M cellular and M2M communication systems. In this thesis, we first propose a new wideband theoretical multiple-ring based MIMO regular-shaped geometry-based stochastic model (RS-GBSM) for non-isotropic scattering F2M macro-cell scenarios and then derive a generic space-time-frequency (STF) correlation function (CF). The proposed theoretical reference wideband model can be reduced to a narrowband one-ring model, a new closed-form STF CF of which is derived as well. Narrowband and wideband sum-of-sinusoids (SoS) simulation models are then developed, demonstrating a good agreement with the corresponding reference models in terms of correlation functions. Secondly, based on a well-known narrowband two-ring single-input single-output (SISO) M2M channel reference model, we propose new deterministic and stochastic SoS simulation models for non-isotropic scattering environments. The proposed deterministic simulator is the first SISO M2M deterministic simulator with good performance, while the proposed stochastic simulator outperforms the existing one in terms of fitting the desired statistical properties of the corresponding reference model. Thirdly, a new adaptive narrowband MIMO M2M RS-GBSM is proposed for nonisotropic scattering environments. To the best of our knowledge, the proposed M2M model is the first RS-GBSM that has the ability to study the impact of the vehicular traffic density on channel statistics. From the proposed theoretical reference model, we comprehensively investigate some important M2M channel statistics including the STF CF, space-Doppler-frequency power spectral density, envelope level crossing rate, and average fade duration. A close agreement between some channel statistics obtained from the proposed reference model and measurement data is observed, confirming the utility of our model. Finally, we extend the above narrowband model to a new wideband MIMO M2M RSGBSM with respect to the frequency-selectivity. The proposed wideband reference model is validated by observing a good match between some statistical properties of the theoretical model and available measurement data. From the wideband reference model, we further design new wideband deterministic and stochastic SoS simulation models. The proposed wideband simulators can be easily reduced to narrowband ones. The utilities of the newly derived narrowband and wideband simulation models are validated by comparing their statistical properties with those of the corresponding reference models. The proposed channel reference models and simulators are expected to be useful for the design, testing, and performance evaluation of future MIMO cellular and M2M communication systems.Scottish Funding Counci

Mobile Networks

The growth in the use of mobile networks has come mainly with the third generation systems and voice traffic. With the current third generation and the arrival of the 4G, the number of mobile users in the world will exceed the number of landlines users. Audio and video streaming have had a significant increase, parallel to the requirements of bandwidth and quality of service demanded by those applications. Mobile networks require that the applications and protocols that have worked successfully in fixed networks can be used with the same level of quality in mobile scenarios. Until the third generation of mobile networks, the need to ensure reliable handovers was still an important issue. On the eve of a new generation of access networks (4G) and increased connectivity between networks of different characteristics commonly called hybrid (satellite, ad-hoc, sensors, wired, WIMAX, LAN, etc.), it is necessary to transfer mechanisms of mobility to future generations of networks. In order to achieve this, it is essential to carry out a comprehensive evaluation of the performance of current protocols and the diverse topologies to suit the new mobility conditions

Resource allocation methods for quality-of-service provisioning in heterogeneous wireless networks

The increased use of mobile wireless devices that we have recently been witnessing, such as smartphones, tablets, e-readers, and WiFi enabled devices in general, is driving an unprecedented increase in the amount of data traffic. This fast market adoption of the wireless technology along with the tremendous success of multimedia applications brought about higher capacity, connectivity, and Quality of Service (QoS) requirements that can no longer be met with traditional networking paradigms. As a result, heterogeneous wireless networks have recently emerged as a potential solution for meeting such new requirements. Hybrid wireless mesh networks and femtocell/macrocell networks are examples of these newly emerging heterogeneous networks. While mesh networks are viewed as the backbone/core network, femtocell and cellular networks are viewed as the access networks linking end-users with the backbone networks. In this dissertation, we address the problem of resource allocation in heterogeneous networks. We investigate both types of networks/architectures: next-generation wireless backbone networks or simply wireless mesh networks (WMNs) and next-generation wireless access networks or simply femtocell (FC) networks. WMNs were first introduced to foster the availability of Internet services anywhere and at anytime. However, capacity limitation has been a fundamental challenge to WMNs, mainly due to the interference arising from the wireless nature of the environment as well as to the scarcity of the radio/channel resources. To overcome this problem, we propose in this dissertation an efficient scheduling scheme that reduces interference among active links via wise time and frequency assignments to the wireless mesh routers. The developed scheme is traffic aware in that it maximizes the capacity of wireless links but while accounting for their traffic loads, thus meeting the end-to-end bandwidth requirements as much as possible. In the second part of this thesis, we focus on developing power allocation techniques for FC networks. FCs have recently emerged as a key networking solution that has great potential for improving the capacity and coverage of traditional macrocell (MC) networks through high-speed indoor coverage. Their deployment, however, has given rise to new interference challenges which are mainly due to the FCs' autonomous nature and to the unreliability of the wireless medium. Driven by this fact, in the second part of this thesis, we first design a fully-distributed estimation-based power allocation scheme that aims at fairly maximizing the capacity of FC networks. Second, we propose a novel distributed stochastic power control scheme that aims at maintaining the users' minimum= required QoS. Finally, we provide cross-layer performance analysis of two-tier FC networks, in which we characterize the uplink interference and study its impact on the data-link layer QoS performance in FC networks