Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols

In this paper, we describe direct-sequence code-division multiple-access (DS-CDMA) systems with quadriphase-shift keying in which channel estimation, coherent demodulation, and decoding are iteratively performed without the use of any training or pilot symbols. An expectation-maximization channel-estimation algorithm for the fading amplitude, phase, and the interference power spectral density (PSD) due to the combined interference and thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate codes. After initial estimates of the fading amplitude, phase, and interference PSD are obtained from the received symbols, subsequent values of these parameters are iteratively updated by using the soft feedback from the channel decoder. The updated estimates are combined with the received symbols and iteratively passed to the decoder. The elimination of pilot symbols simplifies the system design and allows either an enhanced information throughput, an improved bit error rate, or greater spectral efficiency. The interference-PSD estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication

A comparison of digital transmission techniques under multichannel conditions at 2.4 GHz in the ISM BAND

In order to meet the observation quality criteria of micro-UAVs, and particularly in the context of the « Trophée Micro-Drones », ISAE/SUPAERO is studying technical solutions to transmit a high data rate from a video payload onboard a micro-UAV. The laboratory has to consider the impact of multipath and shadowing effects on the emitted signal. Therefore fading resistant transmission techniques are considered. This techniques paper have to reveal an optimum trade-off between three parameters, namely: the characteristics of the video stream, the complexity of the modulation and coding scheme, and the efficiency of the transmission, in term of BER

Estimation and detection techniques for doubly-selective channels in wireless communications

A fundamental problem in communications is the estimation of the channel. The signal transmitted through a communications channel undergoes distortions so that it is often received in an unrecognizable form at the receiver. The receiver must expend significant signal processing effort in order to be able to decode the transmit signal from this received signal. This signal processing requires knowledge of how the channel distorts the transmit signal, i.e. channel knowledge. To maintain a reliable link, the channel must be estimated and tracked by the receiver. The estimation of the channel at the receiver often proceeds by transmission of a signal called the 'pilot' which is known a priori to the receiver. The receiver forms its estimate of the transmitted signal based on how this known signal is distorted by the channel, i.e. it estimates the channel from the received signal and the pilot. This design of the pilot is a function of the modulation, the type of training and the channel. [Continues.

Estimation of bit error rate in 2×2 and 4×4 multi-input multi-output-orthogonal frequency division multiplexing systems

Multiple-input, multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems with multiple input antennas and multiple output antennas in dynamic environments face the challenge of channel estimation. To overcome this challenge and to improve the performance and signal-to-noise ratio, in this paper we used the Kalman filter for the correct estimation of the signal in dynamic environments. To obtain the original signal at the receiver end bit error rate factor plays a major role. If the signal to noise ratio is high and the bit error rate is low then signal strength is high, the signal received at the receiver end is almost similar to the ith transmitted signal. The dynamic tracking characteristic of Kalman filter is used to establish a dynamic space-time codeword and a collection of orthogonal pilot sequences to prevent interference among transmissions in this paper. Using the simulation, the Kalman filter method can be compared to the other channel estimation method presented in this paper that can track time-varying channels rapidly

Channel Estimation in Coded Modulation Systems

With the outstanding performance of coded modulation techniques in fading channels, much research efforts have been carried out on the design of communication systems able to operate at low signal-to-noise ratios (SNRs). From this perspective, the so-called iterative decoding principle has been applied to many signal processing tasks at the receiver: demodulation, detection, decoding, synchronization and channel estimation. Nevertheless, at low SNRs, conventional channel estimators do not perform satisfactorily. This thesis is mainly concerned with channel estimation issues in coded modulation systems where different diversity techniques are exploited to combat fading in single or multiple antenna systems. First, for single antenna systems in fast time-varying fading channels, the thesis focuses on designing a training sequence by exploiting signal space diversity (SSD). Motivated by the power/bandwidth efficiency of the SSD technique, the proposed training sequence inserts pilot bits into the coded bits prior to constellation mapping and signal rotation. This scheme spreads the training sequence during a transmitted codeword and helps the estimator to track fast variation of the channel gains. A comprehensive comparison between the proposed training scheme and the conventional training scheme is then carried out, which reveals several interesting conclusions with respect to both error performance of the system and mean square error of the channel estimator. For multiple antenna systems, different schemes are examined in this thesis for the estimation of block-fading channels. For typical coded modulation systems with multiple antennas, the first scheme makes a distinction between the iteration in the channel estimation and the iteration in the decoding. Then, the estimator begins iteration when the soft output of the decoder at the decoding iteration meets some specified reliability conditions. This scheme guarantees the convergence of the iterative receiver with iterative channel estimator. To accelerate the convergence process and decrease the complexity of successive iterations, in the second scheme, the channel estimator estimates channel state information (CSI) at each iteration with a combination of the training sequence and soft information. For coded modulation systems with precoding technique, in which a precoder is used after the modulator, the training sequence and data symbols are combined using a linear precoder to decrease the required training overhead. The power allocation and the placement of the training sequence to be precoded are obtained based on a lower bound on the mean square error of the channel estimation. It is demonstrated that considerable performance improvement is possible when the training symbols are embedded within data symbols with an equi-spaced pattern. In the last scheme, a joint precoder and training sequence is developed to maximize the achievable coding gain and diversity order under imperfect CSI. In particular, both the asymptotic performance behavior of the system with the precoded training scheme under imperfect CSI and the mean square error of the channel estimation are derived to obtain achievable diversity order and coding gain. Simulation results demonstrate that the joint optimized scheme outperforms the existing training schemes for systems with given precoders in terms of error rate and the amount of training overhead

Channel Estimation in Multicarrier Communication Systems

The data rate and spectrum efficiency of wireless mobile communications have been significantly improved over the last decade or so. Recently, the advanced systems such as 3GPP LTE and terrestrial digital TV broadcasting have been sophisticatedly developed using OFDM and CDMA technology. In general, most mobile communication systems transmit bits of information in the radio space to the receiver. The radio channels in mobile radio systems are usually multipath fading channels, which cause inter-symbol interference (ISI) in the received signal. To remove ISI from the signal, there is a need of strong equalizer which requires knowledge on the channel impulse response (CIR).This is primarily provided by a separate channel estimator. Usually the channel estimation is based on the known sequence of bits, which is unique for a certain transmitter and which is repeated in every transmission burst. Thus, the channel estimator is able to estimate CIR for each burst separately by exploiting the known transmitted bits and the corresponding received samples. In this thesis we investigate and compare various efficient channel estimation schemes for OFDM systems which can also be extended to MC DS-CDMA systems.The channel estimation can be performed by either inserting pilot tones into all subcarriers of OFDM symbols with a specific period or inserting pilot tones into each OFDM symbol. Two major types of pilot arrangement such as block type and comb type pilot have been focused employing Least Square Error (LSE) and Minimum Mean Square Error (MMSE) channel estimators. Block type pilot sub-carriers is especially suitable for slow-fading radio channels whereas comb type pilots provide better resistance to fast fading channels. Also comb type pilot arrangement is sensitive to frequency selectivity when comparing to block type arrangement. However, there is another supervised technique called Implicit Training (IT) based channel estimation which exploits the first order statistics in the received data, induced by superimposing periodic training sequences with good correlation properties, along with the information symbols. Hence, the need for additional time slots for training the equalizer is avoided. The performance of the estimators is presented in terms of the mean square estimation error (MSEE) and bit error rate (BER)

Enabling Technology and Algorithm Design for Location-Aware Communications

Location-awareness is emerging as a promising technique for future-generation wire­ less network to adaptively enhance and optimize its overall performance through location-enabled technologies such as location-assisted transceiver reconfiguration and routing. The availability of accurate location information of mobile users becomes the essential prerequisite for the design of such location-aware networks. Motivated by the low locationing accuracy of the Global Positioning System (GPS) in dense multipath environments, which is commonly used for acquiring location information in most of the existing wireless networks, wireless communication system-based po­sitioning systems have been investigated as alternatives to fill the gap of the GPS in coverage. Distance-based location techniques using time-of-arrival (TOA) mea­surements are commonly preferred by broadband wireless communications where the arrival time of the signal component of the First Arriving Path (FAP) can be con­verted to the distance between the receiver and the transmitter with known location. With at least three transmitters, the location of the receiver can be determined via trilatération method. However, identification of the FAP’s signal component in dense multipath scenarios is quite challenging due to the significantly weaker power of the FAP as compared with the Later Arriving Paths (LAPs) from scattering, reflection and refraction, and the superposition of these random arrival LAPs’ signal compo­ nents will become large interference to detect the FAP. In this thesis, a robust FAP detection scheme based on multipath interference cancellation is proposed to im­ prove the accuracy of location estimation in dense multipath environments. In the proposed algorithm, the signal components of LAPs is reconstructed based on the estimated channel and data with the assist of the communication receiver, and sub­ sequently removed from the received signal. Accurate FAP detection results are then achieved with the cross-correlation between the interference-suppressed signal and an augmented preamble which is the combination of the original preamble for com­ munications and the demodulated data sequences. Therefore, more precise distance estimation (hence location estimation) can be obtained with the proposed algorithm for further reliable network optimization strategy design. On the other hand, multiceli cooperative communication is another emerging technique to substantially improve the coverage and throughput of traditional cellular networks. Location-awareness also plays an important role in the design and imple­mentation of multiceli cooperation technique. With accurate location information of mobile users, the complexity of multiceli cooperation algorithm design can be dra­matically reduced by location-assisted applications, e.g., automatic cooperative base station (BS) determination and signal synchronization. Therefore, potential latency aroused by cooperative processing will be minimized. Furthermore, the cooperative BSs require the sharing of certain information, e.g., channel state information (CSI), user data and transmission parameters to perform coordination in their signaling strategies. The BSs need to have the capabilities to exchange available information with each other to follow up with the time-varying communication environment. As most of broadband wireless communication systems are already orthogonal frequency division multiplexing (OFDM)-based, a Multi-Layered OFDM System, which is spe­cially tailored for multiceli cooperation is investigated to provide parallel robust, efficient and flexible signaling links for BS coordination purposes. These layers are overlaid with data-carrying OFDM signals in both time and frequency domains and therefore, no dedicated radio resources are required for multiceli cooperative networks. In the final aspect of this thesis, an enhanced channel estimation through itera­ tive decision-directed method is investigated for OFDM system, which aims to provide more accurate estimation results with the aid of the demodulated OFDM data. The performance of traditional training sequence-based channel estimation is often lim­ ited by the length of the training. To achieve acceptable estimation performance, a long sequence has to be used which dramatically reduces the transmission efficiency of data communication. In this proposed method, the restriction of the training se­quence length can be removed and high channel estimation accuracy can be achieved with high transmission efficiency, and therefore it particular fits in multiceli coopera­tive networks. On the other hand, as the performance of the proposed FAP detection scheme also relies on the accuracy of channel estimation and data detection results, the proposed method can be combined with the FAP detection scheme to further optimize the accuracy of multipath interference cancellation and FAP detection

Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER