NOSTROMO - D1.2 - Final Project Results Report

The main objective of the NOSTROMO project has been to develop, demonstrate and evaluate an innovative modelling approach for the rigorous and comprehensive assessment of the performance impact of future ATM concepts and solutions at ECAC network level. This approach brings together the ability of bottom-up microscopic models to capture emergent behaviour and interdependencies between different solutions with the level of tractability and interpretability required to effectively support decision-making. This report provides a summary of NOSTROMO accomplishments and contributions to the SESAR Programme. It gathers technical lessons learned and concludes proposing further developments to facilitate the use of the NOSTROMO methodology in the future SESAR 3 Programme

Spectrum-Based Fault Localization in Model Transformations

Model transformations play a cornerstone role in Model-Driven Engineering (MDE), as they provide the essential mechanisms for manipulating and transforming models. The correctness of software built using MDE techniques greatly relies on the correctness of model transformations. However, it is challenging and error prone to debug them, and the situation gets more critical as the size and complexity of model transformations grow, where manual debugging is no longer possible. Spectrum-Based Fault Localization (SBFL) uses the results of test cases and their corresponding code coverage information to estimate the likelihood of each program component (e.g., statements) of being faulty. In this article we present an approach to apply SBFL for locating the faulty rules in model transformations. We evaluate the feasibility and accuracy of the approach by comparing the effectiveness of 18 different stateof- the-art SBFL techniques at locating faults in model transformations. Evaluation results revealed that the best techniques, namely Kulcynski2, Mountford, Ochiai, and Zoltar, lead the debugger to inspect a maximum of three rules to locate the bug in around 74% of the cases. Furthermore, we compare our approach with a static approach for fault localization in model transformations, observing a clear superiority of the proposed SBFL-based method.Comisión Interministerial de Ciencia y Tecnología TIN2015-70560-RJunta de Andalucía P12-TIC-186

Role-Modeling in Round-Trip Engineering for Megamodels

Software is becoming more and more part of our daily life and makes it easier, e.g., in the areas of communication and infrastructure. Model-driven software development forms the basis for the development of software through the use and combination of different models, which serve as central artifacts in the software development process. In this respect, model-driven software development comprises the process from requirement analysis through design to software implementation. This set of models with their relationships to each other forms a so-called megamodel. Due to the overlapping of the models, inconsistencies occur between the models, which must be removed. Therefore, round-trip engineering is a mechanism for synchronizing models and is the foundation for ensuring consistency between models. Most of the current approaches in this area, however, work with outdated batch-oriented transformation mechanisms, which no longer meet the requirements of more complex, long-living, and ever-changing software. In addition, the creation of megamodels is time-consuming and complex, and they represent unmanageable constructs for a single user. The aim of this thesis is to create a megamodel by means of easy-to-learn mechanisms and to achieve its consistency by removing redundancy on the one hand and by incrementally managing consistency relationships on the other hand. In addition, views must be created on the parts of the megamodel to extract them across internal model boundaries. To achieve these goals, the role concept of Kühn in 2014 is used in the context of model-driven software development, which was developed in the Research Training Group 'Role-based Software Infrastructures for continuous-context-sensitive Systems.' A contribution of this work is a role-based single underlying model approach, which enables the generation of views on heterogeneous models. Besides, an approach for the synchronization of different models has been developed, which enables the role-based single underlying model approach to be extended by new models. The combination of these two approaches creates a runtime-adaptive megamodel approach that can be used in model-driven software development. The resulting approaches will be evaluated based on an example from the literature, which covers all areas of the work. In addition, the model synchronization approach will be evaluated in connection with the Transformation Tool Contest Case from 2019

Towards using intelligent techniques to assist software specialists in their tasks

L’automatisation et l’intelligence constituent des préoccupations majeures dans le domaine de l’Informatique. Avec l’évolution accrue de l’Intelligence Artificielle, les chercheurs et l’industrie se sont orientés vers l’utilisation des modèles d’apprentissage automatique et d’apprentissage profond pour optimiser les tâches, automatiser les pipelines et construire des systèmes intelligents. Les grandes capacités de l’Intelligence Artificielle ont rendu possible d’imiter et même surpasser l’intelligence humaine dans certains cas aussi bien que d’automatiser les tâches manuelles tout en augmentant la précision, la qualité et l’efficacité. En fait, l’accomplissement de tâches informatiques nécessite des connaissances, une expertise et des compétences bien spécifiques au domaine. Grâce aux puissantes capacités de l’intelligence artificielle, nous pouvons déduire ces connaissances en utilisant des techniques d’apprentissage automatique et profond appliquées à des données historiques représentant des expériences antérieures. Ceci permettra, éventuellement, d’alléger le fardeau des spécialistes logiciel et de débrider toute la puissance de l’intelligence humaine. Par conséquent, libérer les spécialistes de la corvée et des tâches ordinaires leurs permettra, certainement, de consacrer plus du temps à des activités plus précieuses. En particulier, l’Ingénierie dirigée par les modèles est un sous-domaine de l’informatique qui vise à élever le niveau d’abstraction des langages, d’automatiser la production des applications et de se concentrer davantage sur les spécificités du domaine. Ceci permet de déplacer l’effort mis sur l’implémentation vers un niveau plus élevé axé sur la conception, la prise de décision. Ainsi, ceci permet d’augmenter la qualité, l’efficacité et productivité de la création des applications. La conception des métamodèles est une tâche primordiale dans l’ingénierie dirigée par les modèles. Par conséquent, il est important de maintenir une bonne qualité des métamodèles étant donné qu’ils constituent un artéfact primaire et fondamental. Les mauvais choix de conception, ainsi que les changements conceptuels répétitifs dus à l’évolution permanente des exigences, pourraient dégrader la qualité du métamodèle. En effet, l’accumulation de mauvais choix de conception et la dégradation de la qualité pourraient entraîner des résultats négatifs sur le long terme. Ainsi, la restructuration des métamodèles est une tâche importante qui vise à améliorer et à maintenir une bonne qualité des métamodèles en termes de maintenabilité, réutilisabilité et extensibilité, etc. De plus, la tâche de restructuration des métamodèles est délicate et compliquée, notamment, lorsqu’il s’agit de grands modèles. De là, automatiser ou encore assister les architectes dans cette tâche est très bénéfique et avantageux. Par conséquent, les architectes de métamodèles pourraient se concentrer sur des tâches plus précieuses qui nécessitent de la créativité, de l’intuition et de l’intelligence humaine. Dans ce mémoire, nous proposons une cartographie des tâches qui pourraient être automatisées ou bien améliorées moyennant des techniques d’intelligence artificielle. Ensuite, nous sélectionnons la tâche de métamodélisation et nous essayons d’automatiser le processus de refactoring des métamodèles. A cet égard, nous proposons deux approches différentes: une première approche qui consiste à utiliser un algorithme génétique pour optimiser des critères de qualité et recommander des solutions de refactoring, et une seconde approche qui consiste à définir une spécification d’un métamodèle en entrée, encoder les attributs de qualité et l’absence des design smells comme un ensemble de contraintes et les satisfaire en utilisant Alloy.Automation and intelligence constitute a major preoccupation in the field of software engineering. With the great evolution of Artificial Intelligence, researchers and industry were steered to the use of Machine Learning and Deep Learning models to optimize tasks, automate pipelines, and build intelligent systems. The big capabilities of Artificial Intelligence make it possible to imitate and even outperform human intelligence in some cases as well as to automate manual tasks while rising accuracy, quality, and efficiency. In fact, accomplishing software-related tasks requires specific knowledge and skills. Thanks to the powerful capabilities of Artificial Intelligence, we could infer that expertise from historical experience using machine learning techniques. This would alleviate the burden on software specialists and allow them to focus on valuable tasks. In particular, Model-Driven Engineering is an evolving field that aims to raise the abstraction level of languages and to focus more on domain specificities. This allows shifting the effort put on the implementation and low-level programming to a higher point of view focused on design, architecture, and decision making. Thereby, this will increase the efficiency and productivity of creating applications. For its part, the design of metamodels is a substantial task in Model-Driven Engineering. Accordingly, it is important to maintain a high-level quality of metamodels because they constitute a primary and fundamental artifact. However, the bad design choices as well as the repetitive design modifications, due to the evolution of requirements, could deteriorate the quality of the metamodel. The accumulation of bad design choices and quality degradation could imply negative outcomes in the long term. Thus, refactoring metamodels is a very important task. It aims to improve and maintain good quality characteristics of metamodels such as maintainability, reusability, extendibility, etc. Moreover, the refactoring task of metamodels is complex, especially, when dealing with large designs. Therefore, automating and assisting architects in this task is advantageous since they could focus on more valuable tasks that require human intuition. In this thesis, we propose a cartography of the potential tasks that we could either automate or improve using Artificial Intelligence techniques. Then, we select the metamodeling task and we tackle the problem of metamodel refactoring. We suggest two different approaches: A first approach that consists of using a genetic algorithm to optimize set quality attributes and recommend candidate metamodel refactoring solutions. A second approach based on mathematical logic that consists of defining the specification of an input metamodel, encoding the quality attributes and the absence of smells as a set of constraints and finally satisfying these constraints using Alloy

Model-Driven Engineering for Artificial Intelligence - A Systematic Literature Review

Objective: This study aims to investigate the existing body of knowledge in the field of Model-Driven Engineering MDE in support of AI (MDE4AI) to sharpen future research further and define the current state of the art. Method: We conducted a Systemic Literature Review (SLR), collecting papers from five major databases resulting in 703 candidate studies, eventually retaining 15 primary studies. Each primary study will be evaluated and discussed with respect to the adoption of (1) MDE principles and practices and (2) the phases of AI development support aligned with the stages of the CRISP-DM methodology. Results: The study's findings show that the pillar concepts of MDE (metamodel, concrete syntax and model transformation), are leveraged to define domain-specific languages (DSL) explicitly addressing AI concerns. Different MDE technologies are used, leveraging different language workbenches. The most prominent AI-related concerns are training and modeling of the AI algorithm, while minor emphasis is given to the time-consuming preparation of the data sets. Early project phases that support interdisciplinary communication of requirements, such as the CRISP-DM \textit{Business Understanding} phase, are rarely reflected. Conclusion: The study found that the use of MDE for AI is still in its early stages, and there is no single tool or method that is widely used. Additionally, current approaches tend to focus on specific stages of development rather than providing support for the entire development process. As a result, the study suggests several research directions to further improve the use of MDE for AI and to guide future research in this area

Multi-paradigm modelling for cyber–physical systems: a descriptive framework

The complexity of cyber–physical systems (CPSS) is commonly addressed through complex workflows, involving models in a plethora of different formalisms, each with their own methods, techniques, and tools. Some workflow patterns, combined with particular types of formalisms and operations on models in these formalisms, are used successfully in engineering practice. To identify and reuse them, we refer to these combinations of workflow and formalism patterns as modelling paradigms. This paper proposes a unifying (Descriptive) Framework to describe these paradigms, as well as their combinations. This work is set in the context of Multi-Paradigm Modelling (MPM), which is based on the principle to model every part and aspect of a system explicitly, at the most appropriate level(s) of abstraction, using the most appropriate modelling formalism(s) and workflows. The purpose of the Descriptive Framework presented in this paper is to serve as a basis to reason about these formalisms, workflows, and their combinations. One crucial part of the framework is the ability to capture the structural essence of a paradigm through the concept of a paradigmatic structure. This is illustrated informally by means of two example paradigms commonly used in CPS: Discrete Event Dynamic Systems and Synchronous Data Flow. The presented framework also identifies the need to establish whether a paradigm candidate follows, or qualifies as, a (given) paradigm. To illustrate the ability of the framework to support combining paradigms, the paper shows examples of both workflow and formalism combinations. The presented framework is intended as a basis for characterisation and classification of paradigms, as a starting point for a rigorous formalisation of the framework (allowing formal analyses), and as a foundation for MPM tool development

Model Transformation Languages with Modular Information Hiding

Model transformations, together with models, form the principal artifacts in model-driven software development. Industrial practitioners report that transformations on larger models quickly get sufficiently large and complex themselves. To alleviate entailed maintenance efforts, this thesis presents a modularity concept with explicit interfaces, complemented by software visualization and clustering techniques. All three approaches are tailored to the specific needs of the transformation domain

Model-driven software engineering for construction engineering: Quo vadis?

Models are an inherent part of the construction industry, which leverages from the steady advancements in information and communication technology. One of these advancements is Building Information Modeling (BIM), which denotes the move from 2D drawings to having semantically rich models of the objects subject to construction. Additionally, the way stakeholders collaborate in construction projects and their organization is revisited. This is commonly denoted as Integrated Project Delivery (IPD). Both BIM and IPD originate from the basic principles of Lean Construction, the vision to minimize waste, increase value, and continuous improvement. The application of Model-driven Software Engineering (MDSE) to BIM is a natural choice. Although several approaches utilizing MDSE for BIM have been proposed, so far no structured overview of the current state of the art has been conducted. Such an overview is vitally needed, because the existing literature is fragmented among multiple research areas. Consequently, in this paper, we present a systematic literature review on the application of MDSE to BIM, IPD and Lean Construction resulting in a systematically derived taxonomy, which we used to classify 97 papers published between 2008 and 2018. Based on the taxonomy, we provide an analysis of the classified research showing (a) where the discourse on model-driven construction engineering currently is, (b) the state of the art of model-driven techniques in construction engineering and (c) open research challenges

Model Transformation Languages with Modular Information Hiding

Model transformations, together with models, form the principal artifacts in model-driven software development. Industrial practitioners report that transformations on larger models quickly get sufficiently large and complex themselves. To alleviate entailed maintenance efforts, this thesis presents a modularity concept with explicit interfaces, complemented by software visualization and clustering techniques. All three approaches are tailored to the specific needs of the transformation domain