Investigations of Temperature and Backscatter Correlation in the Dry Snow Zone of the Greenland Ice Sheet

Due to system degradation, satellite-borne scatterometers require post-launch calibrations to maintain accuracy. The dry snow zone of the Greenland ice sheet has been used for calibration due to its relatively constant backscatter properties. However, we recently discovered that some of the variation in the dry snow zone backscatter is seasonal. This paper uses correlation analysis to investigate the relationship between temperature and backscatter in the dry snow zone. The correlation coefficient is found to be significant, especially after spatially averaging the backscatter. However, an analysis and simulation demonstrate that spatial averaging can artificially increase the correlation coefficient

Insights on the OAFlux ocean surface vector wind analysis merged from scatterometers and passive microwave radiometers (1987 onward)

Author Posting. © American Geophysical Union, 2014. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Oceans 119 (2014): 5244–5269, doi:10.1002/2013JC009648.A high-resolution global daily analysis of ocean surface vector winds (1987 onward) was developed by the Objectively Analyzed air-sea Fluxes (OAFlux) project. This study addressed the issues related to the development of the time series through objective synthesis of 12 satellite sensors (two scatterometers and 10 passive microwave radiometers) using a least-variance linear statistical estimation. The issues include the rationale that supports the multisensor synthesis, the methodology and strategy that were developed, the challenges that were encountered, and the comparison of the synthesized daily mean fields with reference to scatterometers and atmospheric reanalyses. The synthesis was established on the bases that the low and moderate winds (<15 m s−1) constitute 98% of global daily wind fields, and they are the range of winds that are retrieved with best quality and consistency by both scatterometers and radiometers. Yet, challenges are presented in situations of synoptic weather systems due mainly to three factors: (i) the lack of radiometer retrievals in rain conditions, (ii) the inability to fill in the data voids caused by eliminating rain-flagged QuikSCAT wind vector cells, and (iii) the persistent differences between QuikSCAT and ASCAT high winds. The study showed that the daily mean surface winds can be confidently constructed from merging scatterometers with radiometers over the global oceans, except for the regions influenced by synoptic weather storms. The uncertainties in present scatterometer and radiometer observations under high winds and rain conditions lead to uncertainties in the synthesized synoptic structures.The project is sponsored by the NASA Ocean Vector Wind Science Team (OVWST) activities under grant NNA10AO86G.2015-02-1

EPS/Metop-SG Scatterometer Mission Science Plan

89 pages, figures, tablesThis Science Plan describes the heritage, background, processing and control of C-band scatterometer data and its remaining exploitation challenges in view of SCA on EPS/MetOp-SGPeer reviewe

Ocean Vector Wind Measurement Potential from the Global Precipitation Measurement Mission using a Combined Active and Passive Algorithm

Ocean surface vector wind (OVW) is an essential parameter for understanding the physics and dynamics of the ocean-atmosphere system, thereby improving weather forecasting and climate studies. Satellite scatterometers, synthetic aperture radars, and polarimetric microwave radiometers have provided almost global coverage of ocean surface vector wind for the last four decades. Nonetheless, a consistent and uninterrupted long-time data record with the capability of resolving sub-diurnal variability has remained a critical challenge over the years. The Global Precipitation Measurement Mission (GPM) is a satellite mission designed to provide space-based precipitation information on a global scale with complete diurnal sampling. This dissertation presents a combined active and passive retrieval algorithm to investigate the feasibility of ocean surface vector wind measurements from the GPM core satellite by utilizing its Ku- and Ka-band Dual-frequency Precipitation Radar (DPR) and the multi-frequency GPM Microwave Imager (GMI) observations. The unique GPM active and passive geophysical model functions were empirically developed by characterizing the anisotropic nature of ocean backscatter of normalized radar cross-section (δ°) and brightness temperature (TB) at multiple bands. For passive GMF, the modified 2nd Stoke\u27s parameter (linear combination of V and H-pol TBs) was used to mitigate the atmospheric contamination and to enhance the anisotropic wind direction signal superimposed on GMI TBs. The GMFs were combined in a maximum likelihood estimation (MLE) algorithm to infer the OVW. Finally, the retrieval algorithm was validated by comparing OVW retrievals with collocated NASA Advanced Scatterometer (ASCAT) wind vectors. The wind speed and direction retrieval performance statistics are promising and comparable with those of conventional scatterometer and polarimetric radiometer data products. The algorithm demonstrates the capability of the GPM to provide a long-term OVW data record for the entire GPM-TRMM era, which may include unique monthly diurnal OVW statistics

Ocean remote sensing techniques and applications: a review (Part II)

As discussed in the first part of this review paper, Remote Sensing (RS) systems are great tools to study various oceanographic parameters. Part I of this study described different passive and active RS systems and six applications of RS in ocean studies, including Ocean Surface Wind (OSW), Ocean Surface Current (OSC), Ocean Wave Height (OWH), Sea Level (SL), Ocean Tide (OT), and Ship Detection (SD). In Part II, the remaining nine important applications of RS systems for ocean environments, including Iceberg, Sea Ice (SI), Sea Surface temperature (SST), Ocean Surface Salinity (OSS), Ocean Color (OC), Ocean Chlorophyll (OCh), Ocean Oil Spill (OOS), Underwater Ocean, and Fishery are comprehensively reviewed and discussed. For each application, the applicable RS systems, their advantages and disadvantages, various RS and Machine Learning (ML) techniques, and several case studies are discussed.Peer ReviewedPostprint (published version

レーダー・クロス・セクションを用いた円柱形状物質内の水分量推定に関する研究

早大学位記番号:新7736早稲田大

Remote sensing of sea ice properties and dynamics using SAR interferometry

Landfast ice is attached to the coastline and islands and stays immobile over most of the ice season. It is an important element of polar ecosystems and plays a vital role as a marine habitat and in life of local people and economy through offshore technology. Landfast ice is routinely used for on-ice traffic, tourism, and industry, and it protects coasts from storms in winter from erosion. However, landfast ice can break or experience deformation in order of centimeters to meters, which can be dangerous for the coastline and man-made structures, beacons, on-ice traffic, and represents a safety risk for working on the ice and local people. Therefore, landfast ice deformation and stability are important topics in coastal engineering and sea ice modeling. In the framework of this dissertation, InSAR (SAR Interferometry) technology has been applied for deriving landfast ice displacements (publication I), and mapping sea ice morphology, topography and its temporal change (publication III). Also, advantages of InSAR remote sensing in sea ice classification compared to backscatter intensity were demonstrated (publications II and IV). In publication I, for the first time, Sentinel-1 repeat-pass InSAR data acquired over the landfast ice areas were used to study the landfast ice displacements in the Gulf of Bothnia. An InSAR pair with a temporal baseline of 12 days acquired in February 2015 was used. In the study, the surface of landfast ice was stable enough to preserve coherence over the 12-day period, enabling analysis of the interferogram. The advantage of this long temporal baseline is in separating the landfast ice from drift ice and detecting long-term trends in deformation maps. The interferogram showed displacements of landfast ice on the order of 40 cm. The main factor seemed to be compression by drift ice, which was driven against the landfast ice boundary by strong winds from southwest. Landfast ice ridges can hinder ship navigation, but grounded ridges help to stabilize the ice cover. In publication III, ridge formation and displacements in the landfast ice near Utqiaġvik, Alaska were examined. The phase signatures of two single-pass bistatic X-band SAR (Synthetic Aperture Radar) image pairs acquired by TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) satellite on 13 and 24 January 2012 were analyzed. Altogether six cases were identified with ridge displacement in four and formation in two cases under onshore compression. The ridges moved approximately 0.6 and 3.7 km over the study area and ridge formation reached up to 1 meter in upward. The results well corresponded with the locations identified as convergence zones retrieved from the drift algorithm generated by a SAR-based sea ice-tracking algorithm, backscatter intensity images and coastal radar imagery. This method could potentially be used in future to evaluate sea ice stability and ridge formation. A bistatic InSAR pair acquired by the TanDEM-X mission in March 2012 over the Bothnian Bay was used in two further studies (publications II and IV). The potential of X-band InSAR imagery for automated sea ice classification was evaluated. The first results were presented in publication II and the data were further elaborated in publication IV. The backscatter intensity, coherence magnitude and InSAR-phase features, as well as their different combinations, were used as the informative features in classification experiments. In publication II, the purpose was to assess ice properties on the scale used in ice charting, with ice types based on ice concentration and sea ice morphology, while in publication IV, a detailed small-scale analysis was performed. In addition, the sampling design was different in these publications. In publication II, to achieve the best discrimination between open water and several sea-ice types, RF (Random Forests) and ML (Maximum likelihood) classifiers were employed. The best overall accuracies were achieved by combining backscatter intensity & InSAR-phase using RF approach and backscatter intensity & coherence-magnitude using ML approach. The results showed the advantage of adding InSAR features to backscatter intensity for sea ice classification. In the further study (publication IV), a set of state-of-the-art classification approaches including ML, RF and SVM (Support Vector Machine) classifiers were used to achieve the best discrimination between open water and several sea-ice types. Adding InSAR-phase and coherence magnitude to backscatter intensity improved the OA (Overall Accuracy) compared to using only backscatter intensity. The RF and SVM algorithms gave somewhat larger OA compared to ML at the expense of a somewhat longer processing time. Results of publications II and IV demonstrate InSAR features have potential to improve sea ice classification. InSAR could be used by operational ice services to improve mapping accuracy of automated sea ice charting with statistical and machine learning classification approaches.Viime vuosikymmeninä satelliittivälitteisestä SAR-tutkasta on tullut erittäin tärkeä työkalu merijään kaukokartoituksessa. Tämän tutka perustuu sähkömagneettisten aaltojen sirontaan kiinnostavasta kohteesta takaisin tutkaan, mitä seuraa signaalin voimakkuuden mittaaminen. SAR-tutkat käyttävät synteettistä antennia, joka perustuu satelliitin liikkeeseen, mikä mahdollistaa tarkkojen, korkean erotuskyvyn kuvien tuottamisen. SAR-anturit mittaavat myös signaalin vaihetta, jota käytetään interferometria tekniikassa pinnan topografian ja siirtymien laskemiseen eri sovelluksissa, kuten maan muodonmuutoksissa, tarkassa kartoituksessa, maanjäristyksen arvioinnissa ja tulivuorenpurkauksien tarkkailussa. Interferometri tekniikkaa käytettiin tässä opinnäytetyössä pienten jäänsiirtymien analysointiin kiintojäävyöhykkeellä, joka on kiinni rantaviivassa ja saarissa eikä juuri liiku tuulien tai virtausten mukana. Kiintojääalueilla on pohjaan tarttuneita jäävalleja, jotka edistävät kiintojääpeitteen vakautumista. Kiintojäällä on tärkeä rooli merellisenä elinympäristönä, maankäytön kysymyksissä sekä paikallisten ihmisten elämässä ja meritekniikassa. Kiintojää voi murtua liikahdella useita metrejä, mikä voi olla vaarallista rakenteille, majakoille ja jäällä liikkujille. Tässä väitöskirjassa Sentinel-1A ja TanDEM-X satelliitteja ja interferometri tekniikkaa on käytetty arktisilla alueilla ja Itämerellä mittaamaan kiintojään muodonmuutoksia ja siirtymiä sekä niihin liittyviä mekanismeja. Lisäksi on tutkittu automaattista merijääluokitusta interferometrian apuohjelmiston avulla, mikä laajentaa operatiivisten merijääpalvelujen tutkahavaintojen käyttöä. Sentinel-1A:n avulla voitiin tarkastella 12 päivän pituisia muutoksia Pohjanlahden kiintojäävyöhykkeellä, kun interferometria tekniikka mittasi voimakkaan tuulen aiheuttaman 40 cm:n siirtymiä. Pohjoisella jäämerellä voitiin tunnistaa jäävallien siirtymiä ja muodostumia. Vallit siirtyivät noin 0,6 ja 3,7 km matkoja ja muodostuessaan ne kasvoivat metrin korkeuteen. Interferometri tekniikan lisääminen tutkakuvauksen analyysiin osoitti potentiaalin parantaa automaattisen merijääkartoituksen kartoituksen tarkkuutta tilastollisilla ja koneoppimiseen perustuvan luokittelun menetelmillä. Tulevaisuuden työnä merijään luokituksessa ja vallitutkimuksissa olisi suositeltavaa käyttää erilaisia ja useampia tutkakuvauksen geometrioita sekä erilaisia jääolosuhteita eri sääolosuhteiden vallitessa