On chip interconnects for multiprocessor turbo decoding architectures

International audienc

Static Address Generation Easing: a Design Methodology for Parallel Interleaver Architectures

4 pagesInternational audienceFor high throughput applications, turbo-like iterative decoders are implemented with parallel architectures. However, to be efficient parallel architectures require to avoid collision accesses i.e. concurrent read/write accesses should not target the same memory block. This consideration applies to the two main classes of turbo-like codes which are Low Density Parity Check (LDPC) and Turbo-Codes. In this paper we propose a methodology which finds a collision-free mapping of the variables in the memory banks and which optimizes the resulting interleaving architecture. Finally, we show through a pedagogical example the interest of our approach compared to state-of-the-art techniques

Turbo NOC: a framework for the design of Network On Chip based turbo decoder architectures

This work proposes a general framework for the design and simulation of network on chip based turbo decoder architectures. Several parameters in the design space are investigated, namely the network topology, the parallelism degree, the rate at which messages are sent by processing nodes over the network and the routing strategy. The main results of this analysis are: i) the most suited topologies to achieve high throughput with a limited complexity overhead are generalized de-Bruijn and generalized Kautz topologies; ii) depending on the throughput requirements different parallelism degrees, message injection rates and routing algorithms can be used to minimize the network area overhead.Comment: submitted to IEEE Trans. on Circuits and Systems I (submission date 27 may 2009

Application of a design space exploration tool to enhance interleaver generation

This paper presents a methodology to efficiently explore the design space of communication adapters. In most digital signal processing (DSP) applications, the overall performance of the system is significantly affected by communication architectures, as a consequence the designers need specifically optimized adapters. By explicitly modeling these communications within an effective graph-theoretic model and analysis framework, we automatically generate an optimized architecture, named Space-Time AdapteR (STAR). Our design flow inputs a C description of Input/Output data scheduling, and user requirements (throughput, latency, parallelism...), and formalizes communication constraints through a Resource Constraints Graph (RCG). Design space exploration is then performed through associated tools, to synthesize a STAR component under time-to-market constraints. The proposed approach has been tested to design an industrial data mixing block example: an Ultra-Wideband interleaver

Design and Implementation of Benes/Clos On-Chip Interconnection Networks

Networks-on-Chip (NoCs) have emerged as the key on-chip communication architecture for multiprocessor systems-on-chip and chip multiprocessors. Single-hop non-blocking networks have the advantage of providing uniform latency and throughput, which is important for cachecoherent NoC systems. Existing work shows that Benes networks have much lower transistor count and smaller circuit area but longer delay than crossbars. To reduce the delay, we propose to design the Clos network built with larger size switches. Using less than half number of stages than the Benes network, the Clos network with 4x4 switches can significantly reduce the delay. This dissertation focuses on designing high performance Benes/Clos on-chip interconnection networks and implementing the switch setting circuits for these networks. The major contributions are summarized below: The circuit designs of both Benes and Clos networks in different sizes are conducted considering two types of implementation of the configurable switch: with NMOS transistors only and full transmission gates (TGs). The layout and simulation results under 45nm technology show that TG-based Benes networks have much better delay and power performance than their NMOS-based counterparts, though more transistor resources are needed in TG-based designs. Clos networks achieve average 60% lower delay than Benes networks with even smaller area and power consumption. The Lee’s switch setting algorithm is fully implemented in RTL and synthesized. We have refined the algorithm in data structure and initialization/updating of relation values to make it suitable for hardware implementation. The simulation and synthesis results of the switching setting circuits for 4x4 to 64x64 Benes networks under 65nm technology confirm that the trend of delay and area results of the circuit is consistent with that of the Lee’s algorithm. To the best of our knowledge, this is the first complete hardware implementation of the parallel switch setting algorithm which can handle all types of permutations including partial ones. The results in this dissertation confirm that the Benes/Clos networks are promising solution to implement on-chip interconnection network

Improving Network-on-Chip-based Turbo Decoder Architectures

In this work novel results concerning Networkon- Chip-based turbo decoder architectures are presented. Stemming from previous publications, this work concentrates first on improving the throughput by exploiting adaptive-bandwidth-reduction techniques. This technique shows in the best case an improvement of more than 60 Mb/s. Moreover, it is known that double-binary turbo decoders require higher area than binary ones. This characteristic has the negative effect of increasing the data width of the network nodes. Thus, the second contribution of this work is to reduce the network complexity to support doublebinary codes, by exploiting bit-level and pseudo-floatingpoint representation of the extrinsic information. These two techniques allow for an area reduction of up to more than the 40 % with a performance degradation of about 0.2 d

Architecture and Analysis for Next Generation Mobile Signal Processing.

Mobile devices have proliferated at a spectacular rate, with more than 3.3 billion active cell phones in the world. With sales totaling hundreds of billions every year, the mobile phone has arguably become the dominant computing platform, replacing the personal computer. Soon, improvements to today’s smart phones, such as high-bandwidth internet access, high-definition video processing, and human-centric interfaces that integrate voice recognition and video-conferencing will be commonplace. Cost effective and power efficient support for these applications will be required. Looking forward to the next generation of mobile computing, computation requirements will increase by one to three orders of magnitude due to higher data rates, increased complexity algorithms, and greater computation diversity but the power requirements will be just as stringent to ensure reasonable battery lifetimes. The design of the next generation of mobile platforms must address three critical challenges: efficiency, programmability, and adaptivity. The computational efficiency of existing solutions is inadequate and straightforward scaling by increasing the number of cores or the amount of data-level parallelism will not suffice. Programmability provides the opportunity for a single platform to support multiple applications and even multiple standards within each application domain. Programmability also provides: faster time to market as hardware and software development can proceed in parallel; the ability to fix bugs and add features after manufacturing; and, higher chip volumes as a single platform can support a family of mobile devices. Lastly, hardware adaptivity is necessary to maintain efficiency as the computational characteristics of the applications change. Current solutions are tailored specifically for wireless signal processing algorithms, but lose their efficiency when other application domains like high definition video are processed. This thesis addresses these challenges by presenting analysis of next generation mobile signal processing applications and proposing an advanced signal processing architecture to deal with the stringent requirements. An application-centric design approach is taken to design our architecture. First, a next generation wireless protocol and high definition video is analyzed and algorithmic characterizations discussed. From these characterizations, key architectural implications are presented, which form the basis for the advanced signal processor architecture, AnySP.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86344/1/mwoh_1.pd

Turbo NOC: a framework for the design of Network-on-Chip-basedturbo decoder architectures

This paper proposes a general framework for the design and simulation of network-on-chip-based turbo decoder architectures. Several parameters in the design space are investigated, namely, network topology, parallelism degree, the rate at which messages are sent by processing nodes over the network, and routing strategy. The main results of this analysis are as follows: 1) the most suited topologies to achieve high throughput with a limited complexity overhead are generalized de Bruijn and generalized Kautz topologies and 2) depending on the throughput requirements, different parallelism degrees, message injection rates, and routing algorithms can be used to minimize the network area overhead

Configuration as well asPerformance of an On-Chip IncarnationArrangement for Multiprocessor System-On-Chip

The novel on-chip coordinate in silicon indicated course of action to fortify ensured development change in multiprocessor SOC applications. A pipelined circuit-exchanging Employed in the proposed structure with FIFO strategy converged with a multistage system topology in segment way setup game plan. The runtime course strategy connected with by part way setup plan for subjective development changes adjacent the Error Correction Block (ECB). The circuit-exchanging technique offers the permuted information and its humbler overhead draws in the upside of stacking various structures in framework on chip. A CMOS test-chip with 0.13m insists the sound judgment and gainfulness of the proposed outline. The indicated exploratory result in the proposed on-chip system accomplishes 1.9x to 8.2x diminishment of silicon overhead emerged from other setup approaches