Multiuser detection in CDMA using blind techniques

Thesis (Master)--Izmir Institute of Technology, Electronics and Communication Engineering, Izmir, 2004Includes bibliographical references (leaves: 63-65)Text in English; Abstract: Turkish and Englishxiv, 69 leavesIn code division multiple access (CDMA) systems, blind multiuser detection (MUD) techniques are of great importance, especially for downlinks, since in practice, it may be unrealistic for a mobile user to know the spreading codes of other active users in the channel. Furthermore, blind methods remove the need for training sequences which leads to a gain in the channel bandwidth. Subspace concept in blind MUD is an alternative process to classical and batch blind MUD techniques based on principle component analysis, or independent component analysis (ICA) and ICA-like algorithms, such as joint approximate diagonalization of eigen-matrices (JADE), blind source separation algorithm with reference system, etc. Briefly, the desired signal is searched in the signal subspace instead of the whole space, in this type of detectors. A variation of the subspace-based MUD is reduced-rank MUD in which a smaller subspace of the signal subspace is tracked where the desired signal is contained in. This latter method leads to a performance gain compared to a standard subspace method. In this thesis, blind signal subspace and reduced-rank MUD techniques are investigated, and applied to minimum mean square error (MMSE) detectors with two different iterative subspace tracking algorithms. The performances of these detectors are compared in different scenarios for additive white Gaussian noise and for multipath fading channels as well. With simulation results the superiority of the reduced-rank detector to the signal subspace detector is shown. Additionally, as a new remark for both detectors, it is shown that, using minimum description length criterion in subspace tracking algorithm results in an increase in rank-tracking ability and correspondingly in the final performance. Finally, the performances of these two detectors are compared with MMSE, adaptive MMSE and JADE detectors

Independent component analysis applications in CDMA systems

Thesis (Master)--Izmir Institute of Technology, Electronics and Communication Engineering, Izmir, 2004Includes bibliographical references (leaves: 56)Text in English; Abstract: Turkish and Englishxi, 96 leavesBlind source separation (BSS) methods, independent component analysis (ICA) and independent factor analysis (IFA) are used for detecting the signal coming to a mobile user which is subject to multiple access interference in a CDMA downlink communication. When CDMA models are studied for different channel characteristics, it is seen that they are similar with BSS/ICA models. It is also showed that if ICA is applied to these CDMA models, desired user.s signal can be estimated successfully without channel information and other users. code sequences. ICA detector is compared with matched filter detector and other conventional detectors using simulation results and it is seen that ICA has some advantages over the other methods.The other BSS method, IFA is applied to basic CDMA downlink model. Since IFA has some convergence and speed problems when the number of sources is large, firstly basic CDMA model with ideal channel assumption is used in IFA application.With simulation of ideal CDMA channel, IFA is compared with ICA and matched filter.Furthermore, Pearson System-based ICA (PS-ICA) method is used forestimating non-Gaussian multipath fading channel coefficients. Considering some fading channel measurements showing that the fading channel coefficients may have an impulsive nature, these coefficients are modeled with an -stable distribution whose shape parameter takes values close to 2 which makes the distributions slightly impulsive. Simulation results are obtained to compare PS-ICA with classical ICA.Also IFA is applied to the single path CDMA downlink model to estimate fading channel by using the advantage of IFA which is the capability to estimate sources with wide class of distributions

Multi-user detection for multi-rate DS/CDMA systems

Wireless cellular communication is witnessing a rapid growth in market, technology and range of services. Current and future demands for wireless communication services motivate the need for handling multi-media traffic types. In a multimedia communication system, users with different and even time-varying rates and quality of services (QoS) requirements, such as voice, image and data, must be accommodated. The use of Spread Spectrum modulation with Code Division Multiple Access (CDMA) technology is an attractive approach for economical spectrally efficient and high quality cellular and personal communication services. This dissertation explores the technologies of applying different interference cancellation techniques to multi-rate CDMA systems that serve users with different QoS. Multiple Access Interference (MAI) and multipath propagation are the major issues in wireless communication systems. It is also true for multi-rate CDMA systems. Multi-user detection has been shown to be effective in combating the near-far problem and providing superior performance over conventional detection method. In this dissertation, we combine both linear minimum mean squared error (LMMSE) detector, nonlinear decision feedback detector, with other signal processing techniques, such as array processing and multipath combining, to create effective near-far resistant detectors for multi-rate CDMA systems. Firstly, we propose MMSE receivers for synchronous multi-rate CDMA system and compare the performance with the corresponding multi-rate decorrelating detectors. The multi-rate decorrelating detector is optimally near-far resistant and easy to implement. The proposed linear MMSE multi-rate receiver can be adaptively implemented only with the knowledge of the desired user. Due to the fact that MMSE detector offers best trade-off between the MAI cancellation and noise variance enhancement, it is shown that multi-rate MMSE receiver can offer better performance than the multi-rate decorrelator when the interfering users\u27 Signal to Noise Ratio (SNR) is relatively low comparing to the desired user\u27s SNR. Secondly, the asynchronous multi-rate CDMA system, we propose multi-rate multi-shoot decorrelating detectors and multi-rate multi-shot MMSE detectors. The performance of multi-shot detectors can be improved monotonically with increasing the number of stacked bits, but a great computational complexity is going to be introduced in order to get better performance. A debiasing method is introduced to multi-rate multi-shot linear detectors. Debiasing method optimizes multi-rate detectors based on the multi-rate multi-shot model. Debiasing multi-shot MMSE detector for multi-rate signals can offer performance than the corresponding debiasing multi-shot decorrelating detector. Thirdly, we propose linear space-time receivers for multi-rate CDMA systems. The minimum mean-squared error criteria is used. We perform a comparative study on the multi-rate receiver which uses either multipath (temporal) processing or array (spatial) processing, and the one which uses both array and multipath (space-time) processing. The space-time receiver for the multi-rate CDMA signals give us the potential of improving the capacity of multi-rate systems. The space-time processing combined with multiuser detection have the advantages of combating multipath fading through temporal processing, reducing MAI through MMSE method and provide antenna or diversity gain through spatial processing and increasing the capacity of the multi-rate CDMA systems. Lastly, the group-wise interference cancellation methods are proposed for multi-rate CDMA signals. The non-linear decision feedback detection (DFD) schemes are used in the proposed receivers. The proposed interference cancellation schemes benefit from the nature of the unequal received amplitudes for multi-rate CDMA signals. Users with same data rate are grouped together. Users with the highest data-rate are detected first. Interference between the groups is cancelled in a successive order. The results show that the group-wise MMSE DFD yields better performance than multi-rate linear MMSE detector and multi-rate decorrelating detector, especially for highly loaded CDMA systems

Cooperative diversity for the cellular uplink: Sharing strategies, performance analysis, and receiver design

In this thesis, we propose data sharing schemes for the cooperative diversity in a cellular uplink to exploit diversity and enhance throughput performance of the system. Particularly, we consider new two and three-or-more user decode and forward (DF) protocols using space time block codes. We discuss two-user and three-user amplify and forward (AF) protocols and evaluate the performance of the above mentioned data sharing protocols in terms of the bit error rate and the throughput in an asynchronous code division multiple access (CDMA) cellular uplink. We develop a linear receiver for joint space-time decoding and multiuser detection that provides full diversity and near maximum-likelihood performance.;We also focus on a practical situation where inter-user channel is noisy and cooperating users can not successfully estimate other user\u27s data. We further design our system model such that, users decide not to forward anything in case of symbol errors. Channel estimation plays an important role here, since cooperating users make random estimation errors and the base station can not have the knowledge of the errors or the inter-user channels. We consider a training-based approach for channel estimation. We provide an information outage probability analysis for the proposed multi-user sharing schemes. (Abstract shortened by UMI.)

BAMUD Features Demonstration by System View

Direct-sequence code-division multiple access (DS-CDMA) is a frequently used wireless technology in DS-CDMA communications. The conventional DS-CDMA detector follows a single-user detection strategy in which each user is detected separately without regard for the other users. The better strategy is multi-user detection (MUD), where information about multiple users is used to improve detection of each individual user. This paper presents an adaptive multi-user detector converging (for any initialization) to the minimum mean square error (MMSE) detector without requiring training sequences. This blind multi-user detector (BAMUD) requires no more knowledge than does the conventional single-user detector. The structure of adaptive blind detector is simulated by the system design tool SystemView. The aim focus is to verify theoretical knowledge of BAMUD structure using hardware-oriented PC-based model in SystemView

On the performance and capacity of space-time block coded multicarrier CDMA communication systems

Ph.DDOCTOR OF PHILOSOPH

Proceedings of the Fall 1995 Advanced Digital Communication Systems

Coordinated Science Laboratory was formerly known as Control Systems Laborator