Compliant actuators that mimic biological muscle performance with applications in a highly biomimetic robotic arm

This paper endeavours to bridge the existing gap in muscular actuator design for ligament-skeletal-inspired robots, thereby fostering the evolution of these robotic systems. We introduce two novel compliant actuators, namely the Internal Torsion Spring Compliant Actuator (ICA) and the External Spring Compliant Actuator (ECA), and present a comparative analysis against the previously conceived Magnet Integrated Soft Actuator (MISA) through computational and experimental results. These actuators, employing a motor-tendon system, emulate biological muscle-like forms, enhancing artificial muscle technology. A robotic arm application inspired by the skeletal ligament system is presented. Experiments demonstrate satisfactory power in tasks like lifting dumbbells (peak power: 36W), playing table tennis (end-effector speed: 3.2 m/s), and door opening, without compromising biomimetic aesthetics. Compared to other linear stiffness serial elastic actuators (SEAs), ECA and ICA exhibit high power-to-volume (361 x 10^3 W/m) and power-to-mass (111.6 W/kg) ratios respectively, endorsing the biomimetic design's promise in robotic development

A Bio-Inspired Tensegrity Manipulator with Multi-DOF, Structurally Compliant Joints

Most traditional robotic mechanisms feature inelastic joints that are unable to robustly handle large deformations and off-axis moments. As a result, the applied loads are transferred rigidly throughout the entire structure. The disadvantage of this approach is that the exerted leverage is magnified at each subsequent joint possibly damaging the mechanism. In this paper, we present two lightweight, elastic, bio-inspired tensegrity robotics arms which mitigate this danger while improving their mechanism's functionality. Our solutions feature modular tensegrity structures that function similarly to the human elbow and the human shoulder when connected. Like their biological counterparts, the proposed robotic joints are flexible and comply with unanticipated forces. Both proposed structures have multiple passive degrees of freedom and four active degrees of freedom (two from the shoulder and two from the elbow). The structural advantages demonstrated by the joints in these manipulators illustrate a solution to the fundamental issue of elegantly handling off-axis compliance.Comment: IROS 201

Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators

In this work we describe an autonomous soft-bodied robot that is both self-contained and capable of rapid, continuum-body motion. We detail the design, modeling, fabrication, and control of the soft fish, focusing on enabling the robot to perform rapid escape responses. The robot employs a compliant body with embedded actuators emulating the slender anatomical form of a fish. In addition, the robot has a novel fluidic actuation system that drives body motion and has all the subsystems of a traditional robot onboard: power, actuation, processing, and control. At the core of the fish's soft body is an array of fluidic elastomer actuators. We design the fish to emulate escape responses in addition to forward swimming because such maneuvers require rapid body accelerations and continuum-body motion. These maneuvers showcase the performance capabilities of this self-contained robot. The kinematics and controllability of the robot during simulated escape response maneuvers are analyzed and compared with studies on biological fish. We show that during escape responses, the soft-bodied robot has similar input–output relationships to those observed in biological fish. The major implication of this work is that we show soft robots can be both self-contained and capable of rapid body motion.National Science Foundation (U.S.) (NSF IIS1226883)National Science Foundation (U.S.) (NSF CCF1138967)National Science Foundation (U.S.) (1122374

Development of Subcarangiform Bionic Robotic Fish Propelled by Shape Memory Alloy Actuators

In this paper, a shape memory alloy (SMA) actuated subcarangiform robotic fish has been demonstrated using a spring based propulsion mechanism. The bionic robotic fish developed using SMA spring actuators and light weight 3D printed components can be employed for under water applications. The proposed SMA spring-based design without conventional motor and other rotary actuators was able to achieve two-way shape memory effect and has reproduced the subcarangiform locomotion pattern. The positional kinematic model has been developed and the dynamics of the proposed mechanism were analysed and simulated using Automated Dynamic Analysis of Mechanical Systems (ADAMS). An open loop Arduino-relay based switching control has been adopted to control the periodic actuation of the SMA spring mechanism. The undulation of caudal fin in air and water medium has been analysed. The caudal fin and posterior body of the developed fish prototype have taken part in undulation resembling subcarangiform locomotion pattern and steady swimming was achieved in water with a forward velocity of 24.5 mm/s. The proposed design is scalable, light weight and cost effective which may be suitable for underwater surveillance application

SMA-Based Muscle-Like Actuation in Biologically Inspired Robots: A State of the Art Review

New actuation technology in functional or "smart" materials has opened new horizons in robotics actuation systems. Materials such as piezo-electric fiber composites, electro-active polymers and shape memory alloys (SMA) are being investigated as promising alternatives to standard servomotor technology [52]. This paper focuses on the use of SMAs for building muscle-like actuators. SMAs are extremely cheap, easily available commercially and have the advantage of working at low voltages. The use of SMA provides a very interesting alternative to the mechanisms used by conventional actuators. SMAs allow to drastically reduce the size, weight and complexity of robotic systems. In fact, their large force-weight ratio, large life cycles, negligible volume, sensing capability and noise-free operation make possible the use of this technology for building a new class of actuation devices. Nonetheless, high power consumption and low bandwidth limit this technology for certain kind of applications. This presents a challenge that must be addressed from both materials and control perspectives in order to overcome these drawbacks. Here, the latter is tackled. It has been demonstrated that suitable control strategies and proper mechanical arrangements can dramatically improve on SMA performance, mostly in terms of actuation speed and limit cycles

Robotic manipulator inspired by human fingers based on tendon-driven soft grasping

Die menschliche Hand ist in der Lage, verschiedene Greif- und Manipulationsaufgaben auszuführen und kann als einer der geschicktesten und vielseitigsten Effektoren angesehen werden. In dieser Arbeit wurde ein Soft Robotic-Greifer entwickelt, der auf den Erkenntnissen aus der Literatur zur Taxonomie der menschlichen Greiffähigkeiten und den biomechanischen Synergien der menschlichen Hand basiert. Im Bereich der Roboterhände sind sehnengetriebene, unteraktuierte Strukturen weit verbreitet. Inspiriert von der Anatomie der menschlichen Hand, bieten sie durch ihre Flexibilität passive Adaptivität und Robustheit. Es wurde ein Sensorsystem implementiert, bestehend aus Force Sensing Resistors (FSRs), Biegungssensoren und einem Stromsensor, wodurch das System charakterisiert werden kann. Die Kraftsensoren wurden in die Fingerkuppen integriert. In Anlehnung an die menschliche Haut wurden Abgüsse aus Silikonkautschuk an den Fingerballen verwendet. Diese versprechen eine erhöhte Reibung und bessere Adaptivität zum gegriffenen Objekt. Um den entwickelten Greifer zu evaluieren, wurden erste Tests durchgeführt. Zunächst wurde die Funktionalität der Sensoren, wie z.B. der als FSRs ausgewählten Kraftsensoren, getestet. Im weiteren Verlauf wurden die Greiffähigkeiten des Greifers durch Manipulation verschiedener Objekte getestet. Basierend auf den Erkenntnissen aus den praktischen Versuchen kann festgestellt werden, dass der entwickelte Greifer ein hohes Maß an Geschicklichkeit aufweist. Auch die Adaptivität ist dank der verwendeten mechanischen Komponenten gewährleistet. Mittels der Sensorik ist es möglich, den Greifprozess zu kontrollieren. Die Ergebnisse zeigen aber auch, dass z. B. die interne Systemreibung die Verlustleistung des Systems stark beeinflusst.The human hand is able to perform various grasping and manipulation tasks, and can be seen as one of the most dexterous and versatile effectors known. The prehensile capabilities of the hand have already been analyzed, categorized and summarized in a taxonomy in numerous studies. In addition to the taxonomies, research on the biomechanical synergies of the human hand led to the following conceptions: The adduction/abduction movement is independent of the flexion/extension movement. Furthermore, the thumb is rather independent in its mobility from the other fingers, while those move synchronously within their corresponding joints. Lastly, the consideration of the synergies provides that the proximal and distal interphalangeal joints of a human finger are more intensely coordinated than those of the metacarpal joints. In this work, a soft robotic gripper was developed based on the knowledge from the literature on the taxonomy of human gripping abilities and the biomechanical synergies of the human hand. In the domain of robotic hands, tendon-driven underactuated structures are widely used. Inspired by the tensegrity structure of the human hand, they offer passive adaptivity and robustness through their flexibility. A sensor system was implemented, consisting of FSRs, flex sensors and a current sensor, thus the system parameters can be characterized continously. The force sensors were integrated into the fingertips. Molds of silicone rubber were used as finger pads to provide higher friction and better adaptivity to the grasped object on the contact areas of the finger, to mimic human skin. Initial tests were carried out to evaluate the gripper. First, the functionality of the sensors, such as the force sensors selected as FSRs, was tested. In the further course, the gripping capabilities of the gripper were tested by manipulation of various different objects. Based on the findings from the practical experiments, it may be stated that the gripper has a high degree of dexterity. Thanks to the mechanical components used, adaptivity is guaranteed as well. By means of the sensor system it is possible to control the gripping processes. However, the results also showed that, for example, the internal system friction dominates the system’s power dissipation