Computational investigation of left ventricular hemodynamics following bioprosthetic aortic and mitral valve replacement

The left ventricle of the heart is a fundamental structure in the human cardiac system that pumps oxygenated blood into the systemic circulation. Several valvular conditions can cause the aortic and mitral valves associated with the left ventricle to become severely diseased and require replacement. However, the clinical outcomes of such operations, specifically the postoperative ventricular hemodynamics of replacing both valves, are not well understood. This work uses computational fluid–structure interaction (FSI) to develop an improved understanding of this effect by modeling a left ventricle with the aortic and mitral valves replaced with bioprostheses. We use a hybrid Arbitrary Lagrangian–Eulerian/immersogeometric framework to accommodate the analysis of cardiac hemodynamics and heart valve structural mechanics in a moving fluid domain. The motion of the endocardium is obtained from a cardiac biomechanics simulation and provided as an input to the proposed numerical framework. The results from the simulations in this work indicate that the replacement of the native mitral valve with a tri-radially symmetric bioprosthesis dramatically changes the ventricular hemodynamics. Most significantly, the vortical motion in the left ventricle is found to reverse direction after mitral valve replacement. This study demonstrates that the proposed computational FSI framework is capable of simulating complex multiphysics problems and can provide an in-depth understanding of the cardiac mechanics.This is a manuscript of the article Published as Xu, Fei, Emily L. Johnson, Chenglong Wang, Arian Jafari, Cheng-Hau Yang, Michael S. Sacks, Adarsh Krishnamurthy, and Ming-Chen Hsu. "Computational investigation of left ventricular hemodynamics following bioprosthetic aortic and mitral valve replacement." Mechanics Research Communications 112 (2021): 103604. doi: https://doi.org/10.1016/j.mechrescom.2020.103604. Copyright 2021 The Authors. CC BY-NC-N

Fluid-electro-mechanical model of the human heart for supercomputers

The heart is a complex system. From the transmembrane cell activity to the spatial organization in helicoidal fibers, it includes several spatial and temporal scales. The heart muscle is surrounded by two main tissues that modulate how it deforms: the pericardium and the blood. The former constrains the epicardial surface and the latter exerts a force in the endocardium. The main function of this peculiar muscle is to pump blood to the pulmonary and systemic circulations. In this way, solid dynamics of the heart is as important as the induced fluid dynamics. Despite the work done in computational research of multiphysics heart modelling, there is no reference of a tightly-coupled scheme that includes electrophysiology, solid and fluid mechanics in a whole human heart. In this work, we propose, develop and test a fluid-electro-mechanical model of the human heart. To start, the heartbeat phenomenon is disassembled in the different composing problems. The first building block is the electrical activity of the myocytes, that induces the mechanical deformation of the myocardium. The contraction of the muscle reduces the intracavitary space, that pushes out the contained blood. At the same time, the inertia, pressure and viscous stresses in this fluid exerts a force on the solid wall. In this way, we can understand the heart as a fluid-electro-mechanical problem. All the models are implemented in Alya, the Barcelona Supercomputing Center simulation software. A multi-code approach is used, splitting the problem in a solid and a fluid domain. In the former, electrophysiology coupled with solid mechanics are solved. In the later, fluid dynamics in an arbitrary Lagrangian-Eulerian domain are computed. The equations are spatially discretized using the finite element method and temporally discretized using finite differences. Facilitated by the multi-code approach, a novel high performance quasi-Newton method is developed to deal with the intrinsic issues of fluid-structure interaction problems in iomechanics. All the schemes are optimized to run in massively parallel computers. A wide range of experiments are shown to validate, test and tune the numerical model. The different hypothesis proposed — as the critical effect of the atrium or the presence of pericardium — are also tested in these experiments. Finally, a normal heartbeat is simulated and deeply analyzed. This healthy computational heart is first diseased with a left bundle branch block. After this, its function is restored simulating a cardiac resynchronization therapy. Then, a third grade atrioventricular block is simulated in the healthy heart. In this case, the pathologic model is treated with a minimally invasive leadless intracardiac pacemaker. This requires to include the device in the geometrical description of the problem, solve the structural problem with the tissue, and the fluid-structure interaction problem with the blood. As final experiment, we test the parallel performance of the coupled solver. In the cases mentioned above, the results are qualitatively compared against experimental measurements, when possible. Finally, a first glance in a coupled fluid-electro-mechanical cardiovascular system is shown. This model is build adding a one dimensional model of the arterial network created by the Laboratório Nacional de Computação Científica in Petropolis, Brasil. Despite the artificial geometries used, the outflow curves are comparable with physiological observations. The model presented in this thesis is a step towards the virtual human heart. In a near future computational models like the presented in this thesis will change how pathologies are understood and treated, and the way biomedical devices are designed.El corazón es un sistema complejo. Desde la actividad celular hasta la organización espacial en fibras helicoidales, incluye gran cantidad de escalas espaciales y temporales. El corazón está rodeado principalmente por dos tejidos que modulan su deformación: el pericardio y la sangre. El primero restringe el movimiento del epicardio, mientras el segundo ejerce fuerza sobre el endocardio. La función principal de este músculo es bombear sangre a la circulación sistémica y a la pulmonar. Así, la deformación del miocardio es tan importante como la fluidodinámica inducida. Al día de hoy, solo se han propuesto modelos parciales del corazón. Ninguno de los modelos publicados resuelve electrofisiología, mecánica del sólido, y dinámica de fluidos en una geometría completa del corazón. En esta tesis, proponemos, desarrollamos y probamos un modelo fluido -electro -mecánico del corazón. Primero, el problema del latido cardíaco es descompuesto en los distintos subproblemas. El primer bloque componente es la actividad eléctrica de los miocitos, que inducen la deformación mecánica del miocardio. La contratación de este músculo, reduce el espacio intracavitario, que empuja la sangre contenida. Al mismo tiempo, la inercia, presión y fuerzas viscosas del fluido inducen una presión sobre la pared del sólido. De esta manera, podemos entender el latido cardíaco como un problema fluido-electro-mecánico. Los modelos son implementados en Alya, el software de simulación del Barcelona Supercomputing Center. Se utiliza un diseño multi-código, separando el problema según el dominio en sólido y fluido. En el primero, se resuelve electrofisiología acoplado con mecánica del sólido. En el segundo, fluido dinámica en un dominio arbitrario Lagrangiano-Euleriano. Las ecuaciones son discretizadas espacial y temporalmente utilizando elementos finitos y diferencias finitas respectivamente. Facilitado por el diseño multi-codigo, se desarrolló un novedoso método quasi-Newton de alta performance, pensado específicamente para lidiar con los problemas intrínsecos de interacción fluido-estructura en biomecánica. Todos los esquemas fueron optimizados para correr en ordenadores masivamente paralelos.Se presenta un amplio espectro de experimentos con el fin de validar, probar y ajustar el modelo numérico. Las diferentes hipótesis propuestas tales como el efecto producido por la presencia de las aurículas o el pericardio son también demostradas en estos experimentos. Finalmente un latido normal es simulado y sus resultados son analizados con profundidad. El corazón computacional sano es, primeramente enfermado de un bloqueo de rama izquierda. Posteriormente se restaura la función normal mediante la terapia de resincronización cardíaca. Luego se afecta al corazón de un bloqueo atrioventricular de tercer grado. Esta patología es tratada mediante la implantación de un marcapasos intracardíaco. Para esto, se requiere incluir el dispositivo en la descripción geométrica, resolver el problema estructural con el tejido y la interacción fluido-estructura con la sangre. Como experimento numérico final, se prueba el desempeño paralelo del modelo acoplado.Finalmente, se muestran resultados preliminares para un modelo fluido-electro-mecánico del sistema cardiovascular. Este modelo se construye agregando un modelo unidimensional del árbol arterial. A pesar de las geometrías artificiales usadas, la curva de flujo en la raíz aórtica es comparable con observaciones experimentales. El modelo presentado aquí representa un avance hacia el humano virtual. En un futuro, modelos similares, cambiarán la forma en la que se entienden y tratan las enfermedades y la forma en la que los dispositivos biomédicos son diseñados.Postprint (published version

Fluid-electro-mechanical model of the human heart for supercomputers

The heart is a complex system. From the transmembrane cell activity to the spatial organization in helicoidal fibers, it includes several spatial and temporal scales. The heart muscle is surrounded by two main tissues that modulate how it deforms: the pericardium and the blood. The former constrains the epicardial surface and the latter exerts a force in the endocardium. The main function of this peculiar muscle is to pump blood to the pulmonary and systemic circulations. In this way, solid dynamics of the heart is as important as the induced fluid dynamics. Despite the work done in computational research of multiphysics heart modelling, there is no reference of a tightly-coupled scheme that includes electrophysiology, solid and fluid mechanics in a whole human heart. In this work, we propose, develop and test a fluid-electro-mechanical model of the human heart. To start, the heartbeat phenomenon is disassembled in the different composing problems. The first building block is the electrical activity of the myocytes, that induces the mechanical deformation of the myocardium. The contraction of the muscle reduces the intracavitary space, that pushes out the contained blood. At the same time, the inertia, pressure and viscous stresses in this fluid exerts a force on the solid wall. In this way, we can understand the heart as a fluid-electro-mechanical problem. All the models are implemented in Alya, the Barcelona Supercomputing Center simulation software. A multi-code approach is used, splitting the problem in a solid and a fluid domain. In the former, electrophysiology coupled with solid mechanics are solved. In the later, fluid dynamics in an arbitrary Lagrangian-Eulerian domain are computed. The equations are spatially discretized using the finite element method and temporally discretized using finite differences. Facilitated by the multi-code approach, a novel high performance quasi-Newton method is developed to deal with the intrinsic issues of fluid-structure interaction problems in iomechanics. All the schemes are optimized to run in massively parallel computers. A wide range of experiments are shown to validate, test and tune the numerical model. The different hypothesis proposed — as the critical effect of the atrium or the presence of pericardium — are also tested in these experiments. Finally, a normal heartbeat is simulated and deeply analyzed. This healthy computational heart is first diseased with a left bundle branch block. After this, its function is restored simulating a cardiac resynchronization therapy. Then, a third grade atrioventricular block is simulated in the healthy heart. In this case, the pathologic model is treated with a minimally invasive leadless intracardiac pacemaker. This requires to include the device in the geometrical description of the problem, solve the structural problem with the tissue, and the fluid-structure interaction problem with the blood. As final experiment, we test the parallel performance of the coupled solver. In the cases mentioned above, the results are qualitatively compared against experimental measurements, when possible. Finally, a first glance in a coupled fluid-electro-mechanical cardiovascular system is shown. This model is build adding a one dimensional model of the arterial network created by the Laboratório Nacional de Computação Científica in Petropolis, Brasil. Despite the artificial geometries used, the outflow curves are comparable with physiological observations. The model presented in this thesis is a step towards the virtual human heart. In a near future computational models like the presented in this thesis will change how pathologies are understood and treated, and the way biomedical devices are designed.El corazón es un sistema complejo. Desde la actividad celular hasta la organización espacial en fibras helicoidales, incluye gran cantidad de escalas espaciales y temporales. El corazón está rodeado principalmente por dos tejidos que modulan su deformación: el pericardio y la sangre. El primero restringe el movimiento del epicardio, mientras el segundo ejerce fuerza sobre el endocardio. La función principal de este músculo es bombear sangre a la circulación sistémica y a la pulmonar. Así, la deformación del miocardio es tan importante como la fluidodinámica inducida. Al día de hoy, solo se han propuesto modelos parciales del corazón. Ninguno de los modelos publicados resuelve electrofisiología, mecánica del sólido, y dinámica de fluidos en una geometría completa del corazón. En esta tesis, proponemos, desarrollamos y probamos un modelo fluido -electro -mecánico del corazón. Primero, el problema del latido cardíaco es descompuesto en los distintos subproblemas. El primer bloque componente es la actividad eléctrica de los miocitos, que inducen la deformación mecánica del miocardio. La contratación de este músculo, reduce el espacio intracavitario, que empuja la sangre contenida. Al mismo tiempo, la inercia, presión y fuerzas viscosas del fluido inducen una presión sobre la pared del sólido. De esta manera, podemos entender el latido cardíaco como un problema fluido-electro-mecánico. Los modelos son implementados en Alya, el software de simulación del Barcelona Supercomputing Center. Se utiliza un diseño multi-código, separando el problema según el dominio en sólido y fluido. En el primero, se resuelve electrofisiología acoplado con mecánica del sólido. En el segundo, fluido dinámica en un dominio arbitrario Lagrangiano-Euleriano. Las ecuaciones son discretizadas espacial y temporalmente utilizando elementos finitos y diferencias finitas respectivamente. Facilitado por el diseño multi-codigo, se desarrolló un novedoso método quasi-Newton de alta performance, pensado específicamente para lidiar con los problemas intrínsecos de interacción fluido-estructura en biomecánica. Todos los esquemas fueron optimizados para correr en ordenadores masivamente paralelos.Se presenta un amplio espectro de experimentos con el fin de validar, probar y ajustar el modelo numérico. Las diferentes hipótesis propuestas tales como el efecto producido por la presencia de las aurículas o el pericardio son también demostradas en estos experimentos. Finalmente un latido normal es simulado y sus resultados son analizados con profundidad. El corazón computacional sano es, primeramente enfermado de un bloqueo de rama izquierda. Posteriormente se restaura la función normal mediante la terapia de resincronización cardíaca. Luego se afecta al corazón de un bloqueo atrioventricular de tercer grado. Esta patología es tratada mediante la implantación de un marcapasos intracardíaco. Para esto, se requiere incluir el dispositivo en la descripción geométrica, resolver el problema estructural con el tejido y la interacción fluido-estructura con la sangre. Como experimento numérico final, se prueba el desempeño paralelo del modelo acoplado.Finalmente, se muestran resultados preliminares para un modelo fluido-electro-mecánico del sistema cardiovascular. Este modelo se construye agregando un modelo unidimensional del árbol arterial. A pesar de las geometrías artificiales usadas, la curva de flujo en la raíz aórtica es comparable con observaciones experimentales. El modelo presentado aquí representa un avance hacia el humano virtual. En un futuro, modelos similares, cambiarán la forma en la que se entienden y tratan las enfermedades y la forma en la que los dispositivos biomédicos son diseñados

A framework for geometric modeling and structural analysis of composite laminates

Laminated fiber-reinforced polymer (FRP) composites show considerable promise in structural applications due to their good combination of low weight and high strength. However, the manufacturing costs of laminated composites is significantly higher than their metallic counterparts. As a consequence, estimating the residual life of composites becomes critical, and can enable reusability in applications that demand lower mechanical strength requirements. One of the major factors affecting the residual life of the laminated composites is the defects introduced during manufacturing or in service. A common way of determining defects in the composite laminates is using non-destructive evaluation (NDE) techniques. In this study, a framework for modeling and structural analysis of composite laminates is presented. The framework follows the laminate manufacturing process and incorporates structural elements, such as stiffeners, as well as defects, such as delaminations, determined using NDE techniques. Each layer composing the laminate is modeled separately and combined to generate the final laminate. The layer combination process is called bonding and involves computation of boundary conditions for the constitutional model being selected for the analysis. Then, the final laminate model and the computed boundary conditions are used during the structural analysis. The initial framework used commercial off-the-shelf (COTS) software, i.e. 3D ACIS Modeler for 3-dimensional modeling and SIMULIA Abaqus for structural analysis via finite element modeling. The framework was then extended to use the NURBS library, NURBS-Python, and the isogeometric analysis library, gIGA, which were developed as a part of this study and released as free and open-source software on GitHub. Using NURBS for modeling and isogeometric analysis for structural analysis provide several advantages, such as directly operating on the exact geometry, and therefore; achieving better estimations on interlaminar and intralaminar stresses and strains, which has significant importance in determining the residual life of the composite laminates

MS FT-2-2 7 Orthogonal polynomials and quadrature: Theory, computation, and applications

Quadrature rules find many applications in science and engineering. Their analysis is a classical area of applied mathematics and continues to attract considerable attention. This seminar brings together speakers with expertise in a large variety of quadrature rules. It is the aim of the seminar to provide an overview of recent developments in the analysis of quadrature rules. The computation of error estimates and novel applications also are described

Generalized averaged Gaussian quadrature and applications

A simple numerical method for constructing the optimal generalized averaged Gaussian quadrature formulas will be presented. These formulas exist in many cases in which real positive GaussKronrod formulas do not exist, and can be used as an adequate alternative in order to estimate the error of a Gaussian rule. We also investigate the conditions under which the optimal averaged Gaussian quadrature formulas and their truncated variants are internal

Numerical modelling of additive manufacturing process for stainless steel tension testing samples

Nowadays additive manufacturing (AM) technologies including 3D printing grow rapidly and they are expected to replace conventional subtractive manufacturing technologies to some extents. During a selective laser melting (SLM) process as one of popular AM technologies for metals, large amount of heats is required to melt metal powders, and this leads to distortions and/or shrinkages of additively manufactured parts. It is useful to predict the 3D printed parts to control unwanted distortions and shrinkages before their 3D printing. This study develops a two-phase numerical modelling and simulation process of AM process for 17-4PH stainless steel and it considers the importance of post-processing and the need for calibration to achieve a high-quality printing at the end. By using this proposed AM modelling and simulation process, optimal process parameters, material properties, and topology can be obtained to ensure a part 3D printed successfully