203 research outputs found
Frequency-domain transmit processing for MIMO SC-FDMA in wideband propagation channels
This document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available
Signal and System Design for Wireless Power Transfer : Prototype, Experiment and Validation
A new line of research on communications and signals design for Wireless
Power Transfer (WPT) has recently emerged in the communication literature.
Promising signal strategies to maximize the power transfer efficiency of WPT
rely on (energy) beamforming, waveform, modulation and transmit diversity, and
a combination thereof. To a great extent, the study of those strategies has so
far been limited to theoretical performance analysis. In this paper, we study
the real over-the-air performance of all the aforementioned signal strategies
for WPT. To that end, we have designed, prototyped and experimented an
innovative radiative WPT architecture based on Software-Defined Radio (SDR)
that can operate in open-loop and closed-loop (with channel acquisition at the
transmitter) modes. The prototype consists of three important blocks, namely
the channel estimator, the signal generator, and the energy harvester. The
experiments have been conducted in a variety of deployments, including
frequency flat and frequency selective channels, under static and mobility
conditions. Experiments highlight that a channeladaptive WPT architecture based
on joint beamforming and waveform design offers significant performance
improvements in harvested DC power over conventional
single-antenna/multiantenna continuous wave systems. The experimental results
fully validate the observations predicted from the theoretical signal designs
and confirm the crucial and beneficial role played by the energy harvester
nonlinearity.Comment: Accepted to IEEE Transactions on Wireless Communication
Insights and approaches for low-complexity 5G small-cell base-station design for indoor dense networks
This paper investigates low-complexity approaches to small-cell base-station (SBS) design, suitable for future 5G millimeter-wave (mmWave) indoor deployments. Using large-scale antenna systems and high-bandwidth spectrum, such SBS can theoretically achieve the anticipated future data bandwidth demand of 10000 fold in the next 20 years. We look to exploit small cell distances to simplify SBS design, particularly considering dense indoor installations. We compare theoretical results, based on a link budget analysis, with the system simulation of a densely deployed indoor network using appropriate mmWave channel propagation conditions. The frequency diverse bands of 28 and 72 GHz of the mmWave spectrum are assumed in the analysis. We investigate the performance of low-complexity approaches using a minimal number of antennas at the base station and the user equipment. Using the appropriate power consumption models and the state-of-the-art sub-component power usage, we determine the total power consumption and the energy efficiency of such systems. With mmWave being typified nonline-of-sight communication, we further investigate and propose the use of direct sequence spread spectrum as a means to overcome this, and discuss the use of multipath detection and combining as a suitable mechanism to maximize link reliability
Delay Alignment Modulation: Manipulating Channel Delay Spread for Efficient Single- and Multi-Carrier Communication
The evolution of mobile communication networks has always been accompanied by
the advancement of ISI mitigation techniques, from equalization in 2G, spread
spectrum and RAKE receiver in 3G, to OFDM in 4G and 5G. Looking forward towards
6G, by exploiting the high spatial resolution brought by large antenna arrays
and the multi-path sparsity of mmWave and Terahertz channels, a novel ISI
mitigation technique termed delay alignment modulation (DAM) was recently
proposed. However, existing works only consider the single-carrier perfect DAM,
which is feasible only when the number of BS antennas is no smaller than that
of channel paths, so that all multi-path signal components arrive at the
receiver simultaneously and constructively. This imposes stringent requirements
on the number of BS antennas and multi-path sparsity. In this paper, we propose
a generic DAM technique to manipulate the channel delay spread via
spatial-delay processing, thus providing a flexible framework to combat channel
time dispersion for efficient single- or multi-carrier transmissions. We first
show that when the number of BS antennas is much larger than that of channel
paths, perfect delay alignment can be achieved to transform the time-dispersive
channel to time non-dispersive channel with the simple delay pre-compensation
and path-based MRT beamforming. When perfect DAM is infeasible or undesirable,
the proposed generic DAM technique can be applied to significantly reduce the
channel delay spread. We further propose the novel DAM-OFDM technique, which is
able to save the CP overhead or mitigate the PAPR issue suffered by
conventional OFDM. We show that the proposed DAM-OFDM involves joint frequency-
and time-domain beamforming optimization, for which a closed-form solution is
derived. Simulation results show that the proposed DAM-OFDM outperforms the
conventional OFDM in terms of spectral efficiency, BER and PAPR.Comment: 16 Pages, 15 figure
Técnicas de igualização adaptativas com estimativas imperfeitas do canal para os futuros sistemas 5G
Wireless communication networks have been continuously experiencing an exponential growth since their inception. The overwhelming demand for high data rates, support of a large number of users while mitigating disruptive interference are the constant research focus and it has led to the creation of new technologies and efficient techniques.
Orthogonal frequency division multiplexing (OFDM) is the most common example of a technology that has come to the fore in this past decade as it provided a simple and generally ideal platform for wireless data transmission.
It’s drawback of a rather high peak-to-average power ratio (PAPR) and sensitivity to phase noise, which in turn led to the adoption of alternative techniques, such as the single carrier systems with frequency domain equalization (SC-FDE) or the multi carrier systems with code division multiple access (MC-CDMA), but the nonlinear Frequency Domain Equalizers (FDE) have been of special note due to their improved performance. From these, the Iterative Block Decision Feedback Equalizer (IB-DFE) has proven itself especially promising due to its compatibility with space diversity, MIMO systems and CDMA schemes.
However, the IB-DFE requires the system to have constant knowledge of the communication channel properties, that is, to have constantly perfect Channel State Information (CSI), which is both unrealistic and impractical to implement.
In this dissertation we shall design an altered IB-DFE receiver that is able to properly detect signals from SC-FDMA based transmitters, even with constantly erroneous channel states. The results shall demonstrate that the proposed equalization scheme is robust to imperfect CSI (I-CSI) situations, since its performance is constantly close to the perfect CSI case, within just a few iterations.Redes sem fios têm crescido de maneira contínua e exponencial desde a sua incepção. A tremenda exigência para altas taxas de dados e o suporte para um elevado número de utilizadores sem aumentar a interferência disruptiva originada por estes são alguns dos focos que levaram ao desenvolvimento de técnicas de compensação e novas tecnologias.
“Orthogonal frequency division multiplexing” (OFDM) é um dos exemplos de tecnologias que se destacaram nesta última década, visto ter fornecido uma plataforma para transmissão de dados sem-fio eficaz e simples.
O seu maior problema é a alta “peak-to-average power ratio” (PAPR) e a sua sensibilidade a ruído de fase que deram motivo à adoção de técnicas alternativas, tais como os sistemas “single carrier” com “frequency domain equalization” (SC-FDE) ou os sistemas “multi-carrier” com “code division multiple access” (MC-CDMA), mas equalizadores não lineares no domínio de frequência têm sido alvo de especial atenção devido ao seu melhor desempenho. Destes, o “iterative block decision feedback equalizer” (IB-DFE) tem-se provado especialmente promissor devido à sua compatibilidade com técnicas de diversidade no espaço, sistemas MIMO e esquemas CDMA.
No entanto, IB-DFE requer que o sistema tenha constante conhecimento das propriedades dos canais usados, ou seja, necessita de ter perfeito “channel state information” (CSI) constantemente, o que é tanto irrealista como impossível de implementar.
Nesta dissertação iremos projetar um recetor IB-DFE alterado de forma a conseguir detetar sinais dum transmissor baseado em tecnologia SC-FDMA, mesmo com a informação de estado de canal errada. Os resultados irão então demonstrar que o novo esquema de equalização proposto é robusto para situações de CSI imperfeito (I-CSI), visto que o seu desempenho se mantém próximo dos valores esperados para CSI perfeito, em apenas algumas iterações.Mestrado em Engenharia Eletrónica e Telecomunicaçõe
Single-Carrier Delay Alignment Modulation for Multi-IRS Aided Communication
Delay alignment modulation (DAM) is a promising technology to achieve
ISI-free wideband communication, by leveraging delay compensation and
path-based beamforming, rather than the conventional channel equalization or
multi-carrier transmission. In particular, when there exist a few strong
time-dispersive channel paths, DAM can effectively align different propagation
delays and achieve their constructive superposition, thus especially appealing
for intelligent reflecting surfaces (IRSs)-aided communications with
controllable multi-paths. In this paper, we apply DAM to multi-IRS aided
wideband communication and study its practical design and achievable
performance. We first provide an asymptotic analysis showing that when the
number of base station (BS) antennas is much larger than that of IRSs, an
ISI-free channel can be established with appropriate delay pre-compensation and
the simple path-based MRT beamforming. We then consider the general system
setup and study the problem of joint path-based beamforming and phase shifts
design for DAM transmission, by considering the three classical beamforming
techniques on a per-path basis, namely the low-complexity path-based MRT
beamforming, the path-based ZF beamforming for ISI-free DAM communication, and
the optimal path-based MMSE beamforming. As a comparison, OFDM-based multi-IRS
aided communication is considered. Simulation results demonstrate that DAM
outperforms OFDM in terms of spectral efficiency, BER, and PAPR.Comment: 16 pages, 10 figure
Full-Diversity QO-STBC Technique for Large-Antenna MIMO Systems
YesThe need to achieve high data rates in modern telecommunication systems, such as 5G standard, motivates the study and development of large antenna and multiple-input multiple-output (MIMO) systems. This study introduces a large antenna-order design of MIMO quasi-orthogonal space-time block code (QO-STBC) system that achieves better signal-to-noise ratio (SNR) and bit-error ratio (BER) performances than the conventional QO-STBCs with the potential for massive MIMO (mMIMO) configurations. Although some earlier MIMO standards were built on orthogonal space-time block codes (O-STBCs), which are limited to two transmit antennas and data rates, the need for higher data rates motivates the exploration of higher antenna configurations using different QO-STBC schemes. The standard QO-STBC offers a higher number of antennas than the O-STBC with the full spatial rate. Unfortunately, also, the standard QO-STBCs are not able to achieve full diversity due to self-interference within their detection matrices; this diminishes the BER performance of the QO-STBC scheme. The detection also involves nonlinear processing, which further complicates the system. To solve these problems, we propose a linear processing design technique (which eliminates the system complexity) for constructing interference-free QO-STBCs and that also achieves full diversity using Hadamard modal matrices with the potential for mMIMO design. Since the modal matrices that orthogonalize QO-STBC are not sparse, our proposal also supports O-STBCs with a well-behaved peak-to-average power ratio (PAPR) and better BER. The results of the proposed QO-STBC outperform other full diversity techniques including Givens-rotation and the eigenvalue decomposition (EVD) techniques by 15 dB for both MIMO and multiple-input single-output (MISO) antenna configurations at 10−3 BER. The proposed interference-free QO-STBC is also implemented for 16×NR and 32×NR MIMO systems, where NR≤2. We demonstrate 8 x 16 and 32 transmit antenna-enabled MIMO systems with the potential for mMIMO design applications with attractive BER and PAPR performance characteristics
- …