Robust 3D indoor positioning system based on radio map using Bayesian network

Indoor positioning remains a serious issue due to the difficulty in attaining sufficient accuracy within an indoor environment using tracking technology of low complexity. Currently, most positioning systems do not embed the off-the-shelf (OTS) system which allows mobile devices to estimate location without using any additional hardware. In this paper, we propose a robust 3D indoor positioning system that is suitable for an indoor IoT application. This system based on Bayesian network that depends on Wi-Fi signals strength. It was experimentally tested in a building with pre-deployed access points (APs). The experimental results indicate that localization accuracy of the proposed system is high with the use of a small-sized radio map

Simultaneous Multi-Information Fusion and Parameter Estimation for Robust 3-D Indoor Positioning Systems

Typical WLAN based indoor positioning systems take the received signal strength (RSS) as the major information source. Due to the complicated indoor environment, the RSS measurements are hard to model and too noisy to achieve a satisfactory 3-D accuracy in multi-floor scenarios. To enhance the performance of WLAN positioning systems, extra information sources could be integrated. In this paper, a Bayesian framework is applied to fuse multi-information sources and estimate the spatial and time varying parameters simultaneously and adaptively. An application of this framework, which fuses pressure measurements, a topological building map with RSS measurements, and simultaneously estimates the pressure sensor bias, is investigated. Our experiments indicate that the localization performance is more accurate and robust by using our approach

Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition

The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future

A hybrid method for indoor user localisation

In this work we describe an approach to indoor user localisation by combining image-based and RF-based methods and compare this new approach to prior work. This paper details a new algorithm for indoor user localisation, demonstrating more effective user localisation than prior approaches and therefore presents the next step in combining two different technologies for localisation in indoor type environments

Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information

Relative positioning between multiple mobile users is essential for many applications, such as search and rescue in disaster areas or human social interaction. Inertial-measurement unit (IMU) is promising to determine the change of position over short periods of time, but it is very sensitive to error accumulation over long term run. By equipping the mobile users with ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate relative positioning by trilateration-based approaches. As compared to vision or laser-based sensors, the UWB does not need to be with in line-of-sight and provides accurate distance estimation. However, UWB does not provide any bearing information and the communication range is limited, thus UWB alone cannot determine the user location without any ambiguity. In this paper, we propose an approach to combine IMU inertial and UWB ranging measurement for relative positioning between multiple mobile users without the knowledge of the infrastructure. We incorporate the UWB and the IMU measurement into a probabilistic-based framework, which allows to cooperatively position a group of mobile users and recover from positioning failures. We have conducted extensive experiments to demonstrate the benefits of incorporating IMU inertial and UWB ranging measurements.Comment: accepted by ICRA 201

Observability of Path Loss Parameters in WLAN-Based Simultaneous Localization and Mapping

Indoor positioning by means of received signal strengths has been gathering much interest since the massive presence of wireless local area networks (WLANs) in buildings. Theoretical approaches rely on the perfect knowledge of the APs' positions and propagation conditions; since this is unrealistic in real world, we estimate such knowledge as well as the building map from data by applying Simultaneous Localization and Mapping (SLAM). In this paper we address the joint estimation of the path loss parameters, namely the transmitted power and the path loss exponent, this latter being usually approximated in the literature by the free space value. We provide examples that show the relevance of estimating both parameters and analyze observability issues from the point of view of estimation theory. The integration of the parameter estimation in a WLAN based SLAM algorithm - WiSLAM - has been carried out and the results are discussed