Improving Energy Efficiency of Application-Specific Instruction-Set Processors

Present-day consumer mobile devices seem to challenge the concept of embedded computing by bringing the equivalent of supercomputing power from two decades ago into hand-held devices. This challenge, however, is well met by pushing the boundaries of embedded computing further into areas previously monopolised by Application-Specific Integrated Circuits (ASICs). Furthermore, in areas traditionally associated with embedded computing, an increase in the complexity of algorithms and applications requires a continuous rise in availability of computing power and energy efficiency in order to fit within the same, or smaller, power budget. It is, ultimately, the amount of energy the application execution consumes that dictates the usefulness of a programmable embedded system, in comparison with implementation of an ASIC.This Thesis aimed to explore the energy efficiency overheads of Application-Specific InstructionSet Processors (ASIPs), a class of embedded processors aiming to compete with ASICs. While an ASIC can be designed to provide precise performance and energy efficiency required by a specific application without unnecessary overheads, the cost of design and verification, as well as the inability to upgrade or modify, favour more flexible programmable solutions. The ASIP designs can match the computing performance of the ASIC for specific applications. What is left, therefore, is achieving energy efficiency of a similar order of magnitude.In the past, one area of ASIP design that has been identified as a major consumer of energy is storage of temporal values produced during computation – the Register File (RF), with the associated interconnection network to transport those values between registers and computational Function Units (FUs). In this Thesis, the energy efficiency of RF and interconnection network is studied using the Transport Triggered Architectures (TTAs) template. Specifically, compiler optimisations aiming at reducing the traffic of temporal values between RF and FUs are presented in this Thesis. Bypassing of the temporal value, from the output of the FU which produces it directly in the input ports of the FUs that require it to continue with the computation, saves multiple RF reads. In addition, if all the uses of such a temporal value can be bypassed, the RF write can be eliminated as well. Such optimisations result in a simplification of the RF, via a reduction in the actual number of registers present or a reduction in the number of read and write ports in the RF and improved energy efficiency. In cases where the limited number of the simultaneous RF reads or writes cause a performance bottleneck, such optimisations result in performance improvements leading to faster execution times, therefore, allowing for execution at lower clock frequencies resulting in additional energy savings.Another area of the ASIP design consuming a significant amount of energy is the instruction memory subsystem, which is the artefact required for the programmability of the embedded processor. As this subsystem is not present in ASIC, the energy consumed for storing an application program and reading it from the instruction memories to control processor execution is an overhead that needs to be minimised. In this Thesis, one particular tool to improve the energy efficiency of the instruction memory subsystem – instruction buffer – is examined. While not trivially obvious, the presence of buffers for storing loop bodies, or parts of them, results in a reduced number of reads from the instruction memories. As a result, memories can be put to lower power state leading to lower overall energy consumption, pending energy-efficient buffer implementation. Specifically, an energy-efficient implementation of the instruction buffer is presented in this Thesis, together with analysis tools to identify candidate loops and assess their suitability for storing in the instruction buffer.The studies presented in this Thesis show that the energy overheads associated with the use of embedded processors, in comparison to ad-hoc ASIC solutions, are manageable when carefully considered during the design of an embedded system for a particular application, or application domain. Finally, the methods presented in this Thesis do not restrict the reprogrammability of the embedded system

Methodologies for Synthesizable Programmable Devices based on Multi-Stage Switching Networks

Nowadays the rise of non-recurring engineering (NRE) costs associated with complexity is becoming a major factor in SoC design, limiting both scaling opportunities and the flexibility advantages offered by the integration of complex computational units. The introduction of embedded programmable elements can represent an appealing solution, able both to guarantee the desired flexibility and upgradabilty and to widen the SoC market. In particular embedded FPGA (eFPGA) cores can provide bit-level optimization for those applications which benefits from synthesis, paying on the other side in terms of performance penalties and area overhead with respect to standard cell ASIC implementations. In this scenario this thesis proposes a design methodology for a synthesizable programmable device designed to be embedded in a SoC. A soft-core embedded FPGA (eFPGA) is hence presented and analyzed in terms of the opportunities given by a fully synthesizable approach, following an implementation flow based on Standard-Cell methodology. A key point of the proposed eFPGA template is that it adopts a Multi-Stage Switching Network (MSSN) as the foundation of the programmable interconnects, since it can be efficiently synthesized and optimized through a standard cell based implementation flow, ensuring at the same time an intrinsic congestion-free network topology. The evaluation of the flexibility potentialities of the eFPGA has been performed using different technology libraries (STMicroelectronics CMOS 65nm and BCD9s 0.11μm) through a design space exploration in terms of area-speed-leakage tradeoffs, enabled by the full synthesizability of the template. Since the most relevant disadvantage of the adopted soft approach, compared to a hardcore, is represented by a performance overhead increase, the eFPGA analysis has been made targeting small area budgets. The generation of the configuration bitstream has been obtained thanks to the implementation of a custom CAD flow environment, and has allowed functional verification and performance evaluation through an application-aware analysis

Hardware-software co-design for low-cost AI processing in space processors

In the recent years there has been an increasing interest in artificial intelligence (AI) and machine learning (ML). The advantages of such applications are widespread across many areas and have drawn the attention of different sectors, such as aerospace. However, these applications require much more performance than the one provided by space processors. In space the environment is not ideal for high-performance cutting-edge processors, due to radiation. For this reason, radiation hardened or radiation tolerant processors are required, which use older technologies and redundant logic, reducing the available die resources that can be exploited. In order to accelerate demanding AI applications in space processors, this thesis presents SPARROW, a low-cost SIMD accelerator for AI operations. SPARROW has been designed following a hardware-software co-design approach by analyzing the requirements of common AI applications in order to improve the efficiency of the module. The design of such module does not use any existing vector extension and instead has in its portability one of the key advantages over other implementations. Furthermore, SPARROW reuses the integer register file of the processor avoiding complex managing of the data while reducing significantly the hardware cost of the module, which is specially interesting in the space domain due to the constraints in the processor area. SPARROW operates with 8-bit integer vector components in two different stages, performing parallel computations in the first and reduction operations in the second. This design is integrated within the baseline processor not requiring any additional pipeline stage nor a modification of the processor frequency. SPARROW also includes swizzling and masking capabilities for the input vectors as well as saturation to work with 8 bits without overflow. SPARROW has been integrated with the LEON3 and NOEL-V space-grade processors, both distributed by Cobham Gaisler. Since each of the baseline processors has a different architecture set, software support for SPARROW has been provided for both SPARC v8 and RISC-V ISAs, showing the portability of the design. Software support been developed using two well established compilers, LLVM and GCC allowing for a comparison of the cost of developing support for each of them. The modifications have included the SPARROW instructions in the assembly language of each architecture and with the use of inline assembly and macros allow a programming model similar to SIMD intrinsics. LEON3 and NOEL-V extended with SPARROW have been implemented on a FPGA to evaluate the performance increase provided by our proposal. In order to compare the performance with the scalar version of the processor, different AI related applications have been tested such as matrix multiplication and image filters, which are essential building blocks for convolutional neural networks. With the use of SPARROW a speed-ups of 6x and up to 15x have been achieved

Flip: Data-Centric Edge CGRA Accelerator

Coarse-Grained Reconfigurable Arrays (CGRA) are promising edge accelerators due to the outstanding balance in flexibility, performance, and energy efficiency. Classic CGRAs statically map compute operations onto the processing elements (PE) and route the data dependencies among the operations through the Network-on-Chip. However, CGRAs are designed for fine-grained static instruction-level parallelism and struggle to accelerate applications with dynamic and irregular data-level parallelism, such as graph processing. To address this limitation, we present Flip, a novel accelerator that enhances traditional CGRA architectures to boost the performance of graph applications. Flip retains the classic CGRA execution model while introducing a special data-centric mode for efficient graph processing. Specifically, it exploits the natural data parallelism of graph algorithms by mapping graph vertices onto processing elements (PEs) rather than the operations, and supporting dynamic routing of temporary data according to the runtime evolution of the graph frontier. Experimental results demonstrate that Flip achieves up to 36$\times$ speedup with merely 19% more area compared to classic CGRAs. Compared to state-of-the-art large-scale graph processors, Flip has similar energy efficiency and 2.2$\times$ better area efficiency at a much-reduced power/area budget

Toolflows for Mapping Convolutional Neural Networks on FPGAs: A Survey and Future Directions

In the past decade, Convolutional Neural Networks (CNNs) have demonstrated state-of-the-art performance in various Artificial Intelligence tasks. To accelerate the experimentation and development of CNNs, several software frameworks have been released, primarily targeting power-hungry CPUs and GPUs. In this context, reconfigurable hardware in the form of FPGAs constitutes a potential alternative platform that can be integrated in the existing deep learning ecosystem to provide a tunable balance between performance, power consumption and programmability. In this paper, a survey of the existing CNN-to-FPGA toolflows is presented, comprising a comparative study of their key characteristics which include the supported applications, architectural choices, design space exploration methods and achieved performance. Moreover, major challenges and objectives introduced by the latest trends in CNN algorithmic research are identified and presented. Finally, a uniform evaluation methodology is proposed, aiming at the comprehensive, complete and in-depth evaluation of CNN-to-FPGA toolflows.Comment: Accepted for publication at the ACM Computing Surveys (CSUR) journal, 201

Generation of Application Specific Hardware Extensions for Hybrid Architectures: The Development of PIRANHA - A GCC Plugin for High-Level-Synthesis

Architectures combining a field programmable gate array (FPGA) and a general-purpose processor on a single chip became increasingly popular in recent years. On the one hand, such hybrid architectures facilitate the use of application specific hardware accelerators that improve the performance of the software on the host processor. On the other hand, it obliges system designers to handle the whole process of hardware/software co-design. The complexity of this process is still one of the main reasons, that hinders the widespread use of hybrid architectures. Thus, an automated process that aids programmers with the hardware/software partitioning and the generation of application specific accelerators is an important issue. The method presented in this thesis neither requires restrictions of the used high-level-language nor special source code annotations. Usually, this is an entry barrier for programmers without deeper understanding of the underlying hardware platform. This thesis introduces a seamless programming flow that allows generating hardware accelerators for unrestricted, legacy C code. The implementation consists of a GCC plugin that automatically identifies application hot-spots and generates hardware accelerators accordingly. Apart from the accelerator implementation in a hardware description language, the compiler plugin provides the generation of a host processor interfaces and, if necessary, a prototypical integration with the host operating system. An evaluation with typical embedded applications shows general benefits of the approach, but also reveals limiting factors that hamper possible performance improvements