Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

MPSoCBench : um framework para avaliação de ferramentas e metodologias para sistemas multiprocessados em chip

Orientador: Rodolfo Jardim de AzevedoTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Recentes metodologias e ferramentas de projetos de sistemas multiprocessados em chip (MPSoC) aumentam a produtividade por meio da utilização de plataformas baseadas em simuladores, antes de definir os últimos detalhes da arquitetura. No entanto, a simulação só é eficiente quando utiliza ferramentas de modelagem que suportem a descrição do comportamento do sistema em um elevado nível de abstração. A escassez de plataformas virtuais de MPSoCs que integrem hardware e software escaláveis nos motivou a desenvolver o MPSoCBench, que consiste de um conjunto escalável de MPSoCs incluindo quatro modelos de processadores (PowerPC, MIPS, SPARC e ARM), organizado em plataformas com 1, 2, 4, 8, 16, 32 e 64 núcleos, cross-compiladores, IPs, interconexões, 17 aplicações paralelas e estimativa de consumo de energia para os principais componentes (processadores, roteadores, memória principal e caches). Uma importante demanda em projetos MPSoC é atender às restrições de consumo de energia o mais cedo possível. Considerando que o desempenho do processador está diretamente relacionado ao consumo, há um crescente interesse em explorar o trade-off entre consumo de energia e desempenho, tendo em conta o domínio da aplicação alvo. Técnicas de escalabilidade dinâmica de freqüência e voltagem fundamentam-se em gerenciar o nível de tensão e frequência da CPU, permitindo que o sistema alcance apenas o desempenho suficiente para processar a carga de trabalho, reduzindo, consequentemente, o consumo de energia. Para explorar a eficiência energética e desempenho, foram adicionados recursos ao MPSoCBench, visando explorar escalabilidade dinâmica de voltaegem e frequência (DVFS) e foram validados três mecanismos com base na estimativa dinâmica de energia e taxa de uso de CPUAbstract: Recent design methodologies and tools aim at enhancing the design productivity by providing a software development platform before the definition of the final Multiprocessor System on Chip (MPSoC) architecture details. However, simulation can only be efficiently performed when using a modeling and simulation engine that supports system behavior description at a high abstraction level. The lack of MPSoC virtual platform prototyping integrating both scalable hardware and software in order to create and evaluate new methodologies and tools motivated us to develop the MPSoCBench, a scalable set of MPSoCs including four different ISAs (PowerPC, MIPS, SPARC, and ARM) organized in platforms with 1, 2, 4, 8, 16, 32, and 64 cores, cross-compilers, IPs, interconnections, 17 parallel version of software from well-known benchmarks, and power consumption estimation for main components (processors, routers, memory, and caches). An important demand in MPSoC designs is the addressing of energy consumption constraints as early as possible. Whereas processor performance comes with a high power cost, there is an increasing interest in exploring the trade-off between power and performance, taking into account the target application domain. Dynamic Voltage and Frequency Scaling techniques adaptively scale the voltage and frequency levels of the CPU allowing it to reach just enough performance to process the system workload while meeting throughput constraints, and thereby, reducing the energy consumption. To explore this wide design space for energy efficiency and performance, both for hardware and software components, we provided MPSoCBench features to explore dynamic voltage and frequency scalability (DVFS) and evaluated three mechanisms based on energy estimation and CPU usage rateDoutoradoCiência da ComputaçãoDoutora em Ciência da Computaçã

A Deep Learning Framework for Unsupervised Affine and Deformable Image Registration

Image registration, the process of aligning two or more images, is the core technique of many (semi-)automatic medical image analysis tasks. Recent studies have shown that deep learning methods, notably convolutional neural networks (ConvNets), can be used for image registration. Thus far training of ConvNets for registration was supervised using predefined example registrations. However, obtaining example registrations is not trivial. To circumvent the need for predefined examples, and thereby to increase convenience of training ConvNets for image registration, we propose the Deep Learning Image Registration (DLIR) framework for \textit{unsupervised} affine and deformable image registration. In the DLIR framework ConvNets are trained for image registration by exploiting image similarity analogous to conventional intensity-based image registration. After a ConvNet has been trained with the DLIR framework, it can be used to register pairs of unseen images in one shot. We propose flexible ConvNets designs for affine image registration and for deformable image registration. By stacking multiple of these ConvNets into a larger architecture, we are able to perform coarse-to-fine image registration. We show for registration of cardiac cine MRI and registration of chest CT that performance of the DLIR framework is comparable to conventional image registration while being several orders of magnitude faster.Comment: Accepted: Medical Image Analysis - Elsevie

Automatic Energy Saving Schemes for Parallel Applications

Although high-performance computing traditionally focuses on the efficient execution of large-scale applications, both energy and power have become critical concerns when approaching exascale. Drastic increases in the power consumption of supercomputers affect significantly their operating costs and failure rates. In modern microprocessor architectures, equipped with dynamic voltage and frequency scaling (DVFS) and CPU clock modulation (throttling), the power consumption may be controlled in software. Additionally, network interconnect, such as Infiniband, may be exploited to maximize energy savings while the application performance loss and frequency switching overheads must be carefully balanced. This work first studies two important collective communication operations, all-to-all and allgather and proposes energy saving strategies on the per-call basis. Next, it targets point-to-point communications to group them into phases and apply frequency scaling to them to save energy by exploiting the architectural and communication stalls. Finally, it proposes an automatic runtime system which combines both collective and point-to-point communications into phases, and applies throttling to them apart from DVFS to maximize energy savings. The experimental results are presented for NAS parallel benchmark problems as well as for the realistic parallel electronic structure calculations performed by the widely used quantum chemistry package GAMESS. Close to the maximum energy savings were obtained with a substantially low performance loss on the given platform

Dynamic Cone-beam CT Reconstruction using Spatial and Temporal Implicit Neural Representation Learning (STINR)

Objective: Dynamic cone-beam CT (CBCT) imaging is highly desired in image-guided radiation therapy to provide volumetric images with high spatial and temporal resolutions to enable applications including tumor motion tracking/prediction and intra-delivery dose calculation/accumulation. However, the dynamic CBCT reconstruction is a substantially challenging spatiotemporal inverse problem, due to the extremely limited projection sample available for each CBCT reconstruction (one projection for one CBCT volume). Approach: We developed a simultaneous spatial and temporal implicit neural representation (STINR) method for dynamic CBCT reconstruction. STINR mapped the unknown image and the evolution of its motion into spatial and temporal multi-layer perceptrons (MLPs), and iteratively optimized the neuron weighting of the MLPs via acquired projections to represent the dynamic CBCT series. In addition to the MLPs, we also introduced prior knowledge, in form of principal component analysis (PCA)-based patient-specific motion models, to reduce the complexity of the temporal INRs to address the ill-conditioned dynamic CBCT reconstruction problem. We used the extended cardiac torso (XCAT) phantom to simulate different lung motion/anatomy scenarios to evaluate STINR. The scenarios contain motion variations including motion baseline shifts, motion amplitude/frequency variations, and motion non-periodicity. The scenarios also contain inter-scan anatomical variations including tumor shrinkage and tumor position change. Main results: STINR shows consistently higher image reconstruction and motion tracking accuracy than a traditional PCA-based method and a polynomial-fitting based neural representation method. STINR tracks the lung tumor to an averaged center-of-mass error of <2 mm, with corresponding relative errors of reconstructed dynamic CBCTs <10%

An efficient design space exploration framework to optimize power-efficient heterogeneous many-core multi-threading embedded processor architectures

By the middle of this decade, uniprocessor architecture performance had hit a roadblock due to a combination of factors, such as excessive power dissipation due to high operating frequencies, growing memory access latencies, diminishing returns on deeper instruction pipelines, and a saturation of available instruction level parallelism in applications. An attractive and viable alternative embraced by all the processor vendors was multi-core architectures where throughput is improved by using micro-architectural features such as multiple processor cores, interconnects and low latency shared caches integrated on a single chip. The individual cores are often simpler than uniprocessor counterparts, use hardware multi-threading to exploit thread-level parallelism and latency hiding and typically achieve better performance-power figures. The overwhelming success of the multi-core microprocessors in both high performance and embedded computing platforms motivated chip architects to dramatically scale the multi-core processors to many-cores which will include hundreds of cores on-chip to further improve throughput. With such complex large scale architectures however, several key design issues need to be addressed. First, a wide range of micro- architectural parameters such as L1 caches, load/store queues, shared cache structures and interconnection topologies and non-linear interactions between them define a vast non-linear multi-variate micro-architectural design space of many-core processors; the traditional method of using extensive in-loop simulation to explore the design space is simply not practical. Second, to accurately evaluate the performance (measured in terms of cycles per instruction (CPI)) of a candidate design, the contention at the shared cache must be accounted in addition to cycle-by-cycle behavior of the large number of cores which superlinearly increases the number of simulation cycles per iteration of the design exploration. Third, single thread performance does not scale linearly with number of hardware threads per core and number of cores due to memory wall effect. This means that at every step of the design process designers must ensure that single thread performance is not unacceptably slowed down while increasing overall throughput. While all these factors affect design decisions in both high performance and embedded many-core processors, the design of embedded processors required for complex embedded applications such as networking, smart power grids, battlefield decision-making, consumer electronics and biomedical devices to name a few, is fundamentally different from its high performance counterpart because of the need to consider (i) low power and (ii) real-time operations. This implies the design objective for embedded many-core processors cannot be to simply maximize performance, but improve it in such a way that overall power dissipation is minimized and all real-time constraints are met. This necessitates additional power estimation models right at the design stage to accurately measure the cost and reliability of all the candidate designs during the exploration phase. In this dissertation, a statistical machine learning (SML) based design exploration framework is presented which employs an execution-driven cycle- accurate simulator to accurately measure power and performance of embedded many-core processors. The embedded many-core processor domain is Network Processors (NePs) used to processed network IP packets. Future generation NePs required to operate at terabits per second network speeds captures all the aspects of a complex embedded application consisting of shared data structures, large volume of compute-intensive and data-intensive real-time bound tasks and a high level of task (packet) level parallelism. Statistical machine learning (SML) is used to efficiently model performance and power of candidate designs in terms of wide ranges of micro-architectural parameters. The method inherently minimizes number of in-loop simulations in the exploration framework and also efficiently captures the non-linear interactions between the micro-architectural design parameters. To ensure scalability, the design space is partitioned into (i) core-level micro-architectural parameters to optimize single core architectures subject to the real-time constraints and (ii) shared memory level micro- architectural parameters to explore the shared interconnection network and shared cache memory architectures and achieves overall optimality. The cost function of our exploration algorithm is the total power dissipation which is minimized, subject to the constraints of real-time throughput (as determined from the terabit optical network router line-speed) required in IP packet processing embedded application

Simulating Execution Time and Power Consumption of Real-Time Tasks on Embedded Platforms

In this paper, we present PARTSim, an open-source power/thermal-aware simulator for embedded real-time systems. This tool is a fork of the well-known RTSim simulator, which can simulate the timing behavior of a set of real-time tasks with various characteristics when running on a multi-processor platform in presence of a number of real-time scheduling policies. PARTSim extends the functionality of RTSim by introducing support for power-aware embedded platforms exhibiting frequency scaling and specific architectural patterns like the ARM big.LITTLE and DynamIQ ones. Experimental results that compare simulated data against execution profiles collected on real platforms show a simulation error under 10 % for both execution time and power consumption at 90th percentile when simulating the effects of DVFS

Chapter One – An Overview of Architecture-Level Power- and Energy-Efficient Design Techniques

Power dissipation and energy consumption became the primary design constraint for almost all computer systems in the last 15 years. Both computer architects and circuit designers intent to reduce power and energy (without a performance degradation) at all design levels, as it is currently the main obstacle to continue with further scaling according to Moore's law. The aim of this survey is to provide a comprehensive overview of power- and energy-efficient “state-of-the-art” techniques. We classify techniques by component where they apply to, which is the most natural way from a designer point of view. We further divide the techniques by the component of power/energy they optimize (static or dynamic), covering in that way complete low-power design flow at the architectural level. At the end, we conclude that only a holistic approach that assumes optimizations at all design levels can lead to significant savings.Peer ReviewedPostprint (published version