Index to nasa tech briefs, issue number 2

Annotated bibliography on technological innovations in NASA space program

DESIGN AND QUALIFICATION OF A ROBUST POLYURETHANE BASED CONFORMAL COATING PROCESS FOR SODIMMs

Conformal coatings protect printed circuit board assemblies, including the electronic components that the assemblies are populated with. A variety of materials and application methods can be used to conformally coat assemblies. The process setup is crucial to repeatable process reliability. The manual spray based conformal coating is widely used. This method of application was selected due to its compatibility, affordability, and efficiency with the required application. Polyurethanes, one of the families of conformal coatings, provide resistance against abrasion, heat, and chemicals while reducing the risk of tin whiskers. In order to minimize the need for rework and create an efficient, repeatable and reproducible process, an option is to automate the process of conformal coating application. This research addressed the research and development of a process specific to SODIMM type memory modules using a two-component polyurethane based conformal coating material. The yield was improved by systematically working on quality by analyzing yield improvements while preventing observed defects. A ‘DoE” based approach was used. Upon validating ‘optimal’ input configurations, the overall process qualification was executed for controlled lots which were then analyzed for visual defects and thickness establishing process effectiveness. The sub-processes for the conformal coating process include board wash, ionograph test, masking, plasma cleaning, conformal coating spray, and cure. The board wash sub-process was qualified using three different temperature and time durations as inputs. When examined under a microscope, white residue was observed for lower temperature configurations. Next, ionograph tests were conducted to verify ionic contamination levels on the surface of the SODIMM products and it was observed that all samples passed. It was observed that an oxygen-based plasma cleaning process provided the minimum contact angles of 8° or below. Argon, by itself, performed equally well but the mixture of the two gases resulted in an angle greater than 8°; hence oxygen was selected. It was seen that the metalized surfaces of the components exhibited thinner deposits of coating than the other areas on board. The final program was modified to accommodate for cross-directional passes and an air tack time of an hour to resolve the observed issue, which turned out to be a successful solution. Controlled lots were processed and inspected for coating thickness. No additional defects were observed. This research has also helped in identifying potential opportunities for improvement

Development of Drop-on-Demand Sample Injection System by Inkjet technology and Its Application to Analytical Chemistry

首都大学東京, 2013-09-30, 博士(工学), 甲第426号首都大学東

디스플레이 및 이미징 시스템으로의 응용을 위한 3D 프린팅 기반 맞춤형 광학 요소의 개발

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2021. 2. 홍용택.일반적으로 제조 공정은 절삭 방식과 적층 방식으로 구분된다. 이 중에서 적층 방식 공정은 저비용 및 단시간으로 복잡한 형태의 구조를 만들 수 있어서 이에 대한 연구와 개발이 꾸준히 진행되어왔다. 특히 3D 프린팅은 적층 방식 공정 중에서 가장 대표적인 방법으로, 기계 부품 및 생체 기관 제조 등의 분야에서는 이미 상용화가 진행되고 있다. 하지만 전자 소자 및 광학 요소 분야에서의 3D 프린팅의 활용은 여전히 연구 개발 또는 시제품 제작 단계에 머무르고 있다. 특히 마이크로 렌즈, 컬러 필터 등이 3D 프린팅으로 응용할 수 있는 가장 가능성 있는 광학 요소로서 디스플레이 및 이미징 시스템에 널리 사용될 것으로 예상되지만 여전히 상용화를 위한 연구가 진행 중이다. 또한 3D 프린팅을 이용한 광학 요소의 제작은 소재, 길이 스케일, 형상 및 응용 방안 등에서도 제한이 많은 상황이다. 따라서 이러한 문제를 극복하기 위해서는 디스플레이 및 이미징 시스템에서의 3D 프린팅 된 광학 요소의 유용성을 확장해야 하며, 다음과 같이 세 가지 측면에서 향상된 성능을 달성해야 한다. 첫째, 다양한 방식의 3D 프린팅 방법을 통해 마이크로미터에서 센티미터까지 광범위의 길이 스케일을 가지는 구조물의 제작이 가능해야 한다. 둘째, 임의의 곡면, 계층적 구조 등 복잡한 형상의 구조물을 쉽게 제작할 수 있어야 한다. 셋째, 단단한 소재 대신 탄성체와 같은 소프트 소재를 이용하여 광학적인 기능을 용이하게 조절할 수 있어야 한다. 이와 같은 동기를 바탕으로 본 학위 논문에서는 디스플레이 및 이미징 시스템으로의 응용을 위한 3D 프린팅 기반 맞춤형 광학 요소의 개발에 대한 내용을 보고한다. 3D 프린팅 기반 광학 요소를 매크로 스케일, 마이크로 스케일 그리고 매크로 및 마이크로 스케일이 혼합된 계층적 구조 등 세 가지 유형으로 분류하고 각각에 대한 응용 분야를 제시한다. 매크로 스케일의 광학 요소로는 가장 기본적인 요소인 렌즈와 거울을 선택한다. 렌즈는 공압식 디스펜싱 방법을 이용하여 실린드리컬 쌍 형태로 제작되었으며, 심리스 모듈러 평판식 디스플레이의 구현을 위해 적용된다. 또한 용융 적층 방식의 3D 프린팅으로 만들어진 몰드를 이용하여 거울을 제작하고, 이를 이용하여 심리스 모듈러 커브드 엣지 디스플레이를 구현한다. 이와 같이 모듈러 디스플레이의 이음새 부분에 3D 프린팅으로 제작된 렌즈 또는 거울을 부착하는 방식으로 화면을 심리스로 확장하는 기술을 제시하고, 다양한 형태의 디스플레이에 적용할 수 있는 가능성을 보여준다. 마이크로 스케일의 광학 요소로는 발광 다이오드에서 색 변환과 광 추출 기능을 동시에 나타내는 색 변환 마이크로 렌즈를 선택한다. 양자 점/광 경화성 고분자 복합체의 전기수력학적 프린팅을 통해 양자 점이 내장된 다양한 형태의 색 변환 마이크로 렌즈를 제작하며, 이를 청색 마이크로 발광 다이오드 어레이의 발광부 상에 적용하여 풀 컬러 마이크로 발광 다이오드 디스플레이로의 응용 가능성을 제시한다. 마지막으로 매크로 및 마이크로 스케일이 혼합된 계층적 구조의 광학 요소로서 디스펜싱 및 건식 러빙 과정의 조합으로 제작된 겹눈 형태를 모사한 렌즈 구조를 제시한다. 반구 형태의 매크로 렌즈를 디스펜싱으로 형성하고, 매크로 렌즈의 곡면 상에 단층의 마이크로 입자의 배열을 얻기 위해 건식 러빙 공정을 진행한다. 이러한 방식으로 형성된 계층적 구조가 소프트한 소재로 복제되어서 신축성을 가지는 겹눈 형태 모사 구조가 완성된다. 마이크로 렌즈 어레이는 매크로 렌즈의 표면을 따라 형성되고 리지드 아일랜드로 역할을 하여, 전체 계층적 구조에 기계적 변형이 가해져 매크로 렌즈의 모양이 변형되어도 마이크로 렌즈는 형상과 해상도, 초점 거리 등의 광학적 특성을 유지할 수 있다. 본 학위 논문은 3D 프린팅을 이용하여 다양한 형태와 스케일의 광학 요소를 제작하고 디스플레이 및 이미징 시스템으로의 여러 응용을 보여줌으로서 앞으로의 새로운 연구 및 개발 방향성을 제시하는 것을 주요 목적으로 한다. 3D 프린팅 설비의 단가가 낮아지고 정밀도 및 해상도가 높아지는 추세에 따라, 광학 요소를 쉽게 만들고 응용할 수 있는 맞춤형 광학 또는 스스로 구현하는 광학 분야가 변형 가능하고 멀티 스케일의 광학계로 점차 확대될 것으로 예상된다. 궁극적으로는 차세대 디스플레이 및 이미징 시스템에 필요한 광학 요소를 위한 기술의 저변을 넓히고, 이를 산업 전반에 응용할 수 있는 기반을 마련하고자 한다.Generally, the manufacturing process is divided into the subtractive (top-down) type and additive type (bottom-up). Among them, the additive manufacturing process has attracted a lot of attention because it can manufacture products with complex shapes in a low-cost and short-time process. In particular, three-dimensional (3D) printing is a representative method, which has already been commercialized in the field of mechanical components and biomedical organ. However, it remains in the research and development step in the field of electronic devices and optical components. Especially, although 3D printed optical components including microlens and color filter are expected to be widely used in display and imaging systems, it is still under investigation for commercialized products, and there are limitations in terms of materials, length scale, shape, and practical applications of components. Therefore, to overcome these issues, it is required for investigating and expanding the potential usefulness for 3D printed optical components in display and imaging systems to achieve better performance, productivity, and usability in three aspects. First, it should be possible to manufacture structures with a wide range of length scales from micrometer to centimeter through various 3D printing methods. Second, complex shapes such as free-from curved surfaces and hierarchical structures should be easily fabricated. Third, it is necessary to add functionality by manufacturing structures in which tunable functions are introduced using soft materials like an elastomer. Based on the above motivations, 3D printing-based customized optical components for display and imaging system applications are introduced in this dissertation. 3D printed optical components are classified into three types and their applications are showed to verify the scalability of 3D printing: macro-scale, microscale, and hierarchical macro/micro-scale. As macro-scale printed optical components, lens and mirror which are the most basic optical components are selected. The lens is fabricated by a pneumatic-type dispensing method with the form of a cylindrical pair and adopted for demonstration of seamless modular flat panel display. Besides, a seamless modular curved-edge display is also demonstrated with a mirror, which is fabricated from fused deposition modeling (FDM)-type 3D printed mold. By simply attaching a printed lens or mirror onto the seam of the modular display, it is possible to secure seamless screen expansion technology with the various form factor of the display panel. In the case of micro-scale printed optical components, the color-convertible microlens is chosen, which act as a color converter and light extractor simultaneously in a light-emitting diode (LED). By electrohydrodynamic (EHD) printing of quantum dot (QD)/photocurable polymer composite, QD-embedded hemispherical lens shape structures with various sizes are fabricated by adjusting printing conditions. Furthermore, it is applied to a blue micro-LED array for full-color micro-LED display applications. Finally, a tunable bio-inspired compound (BIC) eyes structure with a combination of dispensing and a dry-phase rubbing process is suggested as a hierarchical macro/micro-scale printed optical components. A hemispherical macrolens is formed by the dispensing method, followed by a dry-phase rubbing process for arranging micro particles in monolayer onto the curved surface of the macrolens. This hierarchical structure is replicated in soft materials, which have intrinsic stretchability. Microlens array is formed on the surface of the macrolens and acts as a rigid island, thereby maintaining lens shape, resolution, and focal length even though the mechanical strain is applied to overall hierarchical structures and the shape of the macrolens is changed. The primary purposes of this dissertation are to introduce new concepts of the enabling technologies for 3D printed optical components and to shed new light on them. Optical components can be easily made as 3D printing equipment becomes cheaper and more precise, so the field of Consumer optics or Do it yourself (DIY) optics will be gradually expanded on deformable and multi-scale optics. It is expected that this dissertation can contribute to providing a guideline for utilizing and customizing 3D printed optical components in next-generation display and imaging system applications.Chapter 1. Introduction 1 1.1. Manufacturing Process 1 1.2. Additive Manufacturing 4 1.3. Printed Optical Components 8 1.4. Motivation and Organization of Dissertation 11 Chapter 2. Macro-scale Printed Optical Components 15 2.1. Introduction 15 2.2. Seamless Modular Flat Display with Printed Lens 20 2.2.1. Main Concept 20 2.2.2. Experimental Section 23 2.2.3. Results and Discussion 26 2.3. Seamless Modular Curved-edge Display with Printed Mirror 32 2.3.1. Main Concept 32 2.3.2. Experimental Section 33 2.3.3. Results and Discussion 36 2.4. Conclusion 46 Chapter 3. Micro-scale Printed Optical Components 47 3.1. Introduction 47 3.2. Full-color Micro-LED Array with Printed Color-convertible Microlens 52 3.2.1. Main Concept 52 3.2.2. Experimental Section 54 3.2.3. Results and Discussion 57 3.3. Conclusion 65 Chapter 4. Hierarchical Macro/Micro-scale Printed Optical Components 66 4.1. Introduction 66 4.2. Tunable Bio-inspired Compound Eye with Printing and Dry-phase Rubbing Process 69 4.2.1. Main Concept 69 4.2.2. Experimental Section 71 4.2.3. Results and Discussion 73 4.3. Conclusion 79 Chapter 5. Conclusion 80 5.1. Summary 80 5.2. Limitations and Suggestions for Future Researches 83 References 88 Abstract in Korean (국문 초록) 107Docto

Index to NASA Tech Briefs, 1974

The following information was given for 1974: (1) abstracts of reports dealing with new technology derived from the research and development activities of NASA or the U.S. Atomic Energy Commission, arranged by subjects: electronics/electrical, electronics/electrical systems, physical sciences, materials/chemistry, life sciences, mechanics, machines, equipment and tools, fabrication technology, and computer programs, (2) indexes for the above documents: subject, personal author, originating center

Aeronautical engineering: A continuing bibliography with indexes (supplement 119)

This bibliography lists 341 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1980. Abstracts on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems are presented. Research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles are also presented

Materials jetting for advanced optoelectronic interconnect: technologies and application

This report covers the work carried out on Teaching Company Scheme No. 2275 "Materials Jetting for Advanced Interconnect" between February 1998 and February 2000. The project was conducted at the Harlow laboratories of Nortel Networks with the support of the Department of Manufacturing Engineering of Loughborough University. Technical direction and supervision has been provided by Mr Paul Conway, Reader, at Loughborough University, Professor Ken Snowdon and Mr Chris Tanner of Nortel Networks. The aim of the project was to produce and deposit minute and precise volumes of a range of materials, such as metallic alloys, glasses and polymers, onto a variety of substrates commonly used in the electronics and optoelectronics fields. The technology, which is analogous to ink-jet printing, firstly had to be refined to accommodate higher processing temperatures of up to 350°C. The ultimate project deliverable was to produce a specification for jetting equipment suited towards volume manufacturing. [Continues.

Integration of Ultrasonic Consolidation and Direct-Write to Fabricate an Embedded Electrical System Within a Metallic Enclosure

A research project was undertaken to integrate Ultrasonic Consolitation (UC) and Direct-Write (DW) technologies into a single apparatus to fabricate embedded electrical systems within an ultrasonically consolidated metallic enclosure. Process and design guidelines were developed after performing fundamental research on the operational capabilities of the implemented system. In order to develop such guidelines, numerous tests were performed on both UC and DW. The results from those tests, as well as the design and process guidelines for the fabrication of an embedded touch switch, can be used as a base for future research and experimentation on the UC-DW apparatus. The successful fabrication of an embedded touch switch proves the validity of the described design and process parameters and demonstrates the usefulness of this integration

Index to NASA Tech Briefs, 1972

Abstracts of 1972 NASA Tech Briefs are presented. Four indexes are included: subject, personal author, originating center, and Tech Brief number

Index to 1983 NASA Tech Briefs, volume 8, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1983 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences