Autonomous QoS Management and Policing in Unmanaged Local Area Networks

The high increase of bandwidth-intensive applications like high definition video streaming in home and small office environments leads to QoS challenges in hybrid wired/wireless local area networks. These networks are often not QoS aware and may contain bottlenecks in their topology. In addition, they often have a hybrid nature due to the used access technology consisting of, for example, Ethernet, wireless, and PowerLAN links. In this paper, we present the research work on a novel autonomous system for hybrid QoS in local area networks, called QoSiLAN, which does not rely on network infrastructure support but on host cooperation and works independently of the access technology. We present a new QoS Signalling Protocol, policing and admission control algorithms, and a new lightweight statistical bandwidth prediction algorithm for autonomous resource management in LANs. This new QoS framework enables link based, access-medium independent bandwidth management without network support. We provide evaluation results for the novel bandwidth prediction algorithm as well as for the QoSiLAN framework and its protocol, which highlight the features, robustness, and the effectiveness of the proposed system

Toward an OSGi-Based Infra- structure for Smart Home Applications

[[abstract]]In this paper we show the steps to implement the prototype of a smart home environment, with emphasis on the OSGi framework and first-order logic based inference engine. Due to the inherent extensibility of the underlying system, either the interfaces of sensors/home appliances or the inference rules can be adjusted and reloaded during runtime. Moreover, we illustrate several sensor-driven services that may help develop intriguing smart home applications in the near future. Related works and future directions are also addressed to complete our current implementation afterwards.[[conferencetype]]國際[[conferencedate]]20090707~20090709[[iscallforpapers]]Y[[conferencelocation]]Brisbane, Australia

Design of Home Network Architecture using ACE/TAO Real Time Event Service

This paper proposes a home network design based on publisher/subscriber architecture which is developed using ACE/TAO Real-time Event Service (RTES) as the middleware platform. This design addresses a feature to support a real-time implementation for home network application such as home automation. Home network participants have been classified into several components based on consumer and supplier implementation in the ACE/TAO RTES in order to simplify the design. To optimize the network utilization, events are filtered based on their type and source for each publisher and subscriber. To deal with heterogeneous type of home appliances, event header information has been extended to wrap more information. Each of events can be configured with a specific scheduling and priority setting to meet its quality of service (QoS) according to the requirement. Network performance in handling an increasing number of consumer or supplier has been evaluated and show an acceptable result. Keywords: Home Network, ACE/TAO, RTES, QoS

Network and service monitoring in heterogeneous home networks

Home networks are becoming dynamic and technologically heterogeneous. They consist of an increasing number of devices which offer several functionalities and can be used for many different services. In the home, these devices are interconnected using a mixture of networking technologies (for example, Ethernet, Wifi, coaxial cable, or power-line). However, interconnecting these devices is often not easy. The increasing heterogeneity has led to significant device- and service-management complexity. In addition, home networks provide a critical "last meters" access to the public telecom and Internet infrastructure and have a dramatic impact on to the end-to-end reliability and performance of services from these networks. This challenges service providers not only to maintain a satisfactory quality of service level in such heterogeneous home networks, but also to remotely monitor and troubleshoot them. The present thesis work contributes research and several solutions in the field of network and service monitoring in home networks, mainly in three areas: (1) providing automatic device- and service-discovery and configuration, (2) remote management, and (3) providing quality of service (QoS). With regard to the first area, current service discovery technology is designed to relieve the increasing human role in network and service administration. However, the relevant Service Discovery Protocols (SDPs) are lacking crucial features namely: (1) they are not platform- and network-independent, and (2) they do not provide sufficient mechanisms for (device) resource reservation. Consequently, devices implementing different SDPs cannot communicate with each other and share their functionalities and resources in a managed way, especially when they use different network technologies. As a solution to the first problem, we propose a new proxy server architecture that enables IP-based devices and services to be discovered on non-IP based network and vice versa. We implemented the proxy architecture using UPnP respectively Bluetooth SDP as IP- and non-IP-based SDPs. The proxy allows Bluetooth devices and UPnP control points to discover, access, and utilize services located on the other network. Validation experiments with the proxy prototype showed that seamless inter-working can be achieved keeping all proxy functionalities on a single device, thus not requiring modification of currently existing UPnP and Bluetooth end devices. Although the proxy itself taxes the end-to-end performance of the service, it is shown to be still acceptable for an end user. For mitigating resource conflicts in SDPs, we propose a generic resource reservation scheme with properties derived from common SDP operation. Performance studies with a prototype showed that this reservation scheme significantly improves the scalability and sustainability of service access in SDPs, at a minor computational cost. With regard to the second area, it is known that the end-to-end quality of Internet services depends crucially on the performance of the home network. Consequently, service providers require the ability to monitor and configure devices in the home network, behind the home gateway (HG). However, they can only put limited requirements to these off-the-shelf devices, as the consumer electronics market is largely outside their span of control. Therefore they have to make intelligent use of the given device control and management protocols. In this work, we propose an architecture for remote discovery and management of devices in a highly heterogeneous home network. A proof-of-concept is developed for the remote management of UPnP devices in the home with a TR-069/UPnP proxy on the HG. Although this architecture is protocol specific, it can be easily adapted to other web-services based protocols. Service providers are also asking for diagnostic tools with which they can remotely troubleshoot the home networks. One of these tools should be able to gather information about the topology of the home network. Although topology discovery protocols already exist, nothing is known yet about their performance. In this work we propose a set of key performance indicators for home network topology discovery architectures, and how they should be measured. We applied them to the Link-Layer Topology Discovery (LLTD) protocol and the Link-Layer Discovery Protocol (LLDP). Our performance measurement results show that these protocols do not fulfill all the requirements as formulated by the service providers. With regard to the third area, current QoS solutions are mostly based on traffic classification. Because they need to be supported by all devices in the network, they are relatively expensive for home networks. Furthermore, they are not interoperable between different networking technologies. Alternative QoS provision techniques have been proposed in the literature. These techniques require end-user services to pragmatically adapt their properties to the actual condition of the network. For this, the condition of the home network in terms of its available bandwidth, delay, jitter, etc., needs to be known in real time. Appropriate tools for determining the available home network resources do not yet exist. In this work we propose a new method to probe the path capacity and available bandwidth between a server and a client in a home network. The main features of this method are: (a) it does not require adaptation of existing end devices, (b) it does not require pre-knowledge of the link-layer network topology, and (c) it is accurate enough to make reliable QoS predictions for the most relevant home applications. To use these predictions for effective service- or content-adaptation or admission control, one should also know how the state of the home network is expected to change immediately after the current state has been probed. However, not much is known about the stochastic properties of traffic in home networks. Based on a relatively small set of traffic observations in several home networks in the Netherlands, we were able to build a preliminary model for home network traffic dynamics

Case Study - IPv6 based building automation solution integration into an IPv4 Network Service Provider infrastructure

The case study presents a case study describing an Internet Protocol (IP) version 6 (v6) introduction to an IPv4 Internet Service Provider (ISP) network infrastructure. The case study driver is an ISP willing to introduce a new “killer” service related to Internet of Things (IoT) style building automation. The provider and cooperation of third party companies specialized in building automation will provide the service. The ISP has to deliver the network access layer and to accommodate the building automation solution traffic throughout its network infrastructure. The third party companies are system integrators and building automation solution vendors. IPv6 is suitable for such solutions due to the following reasons. The operator can’t accommodate large number of IPv4 embedded devices in its current network due to the lack of address space and the fact that many of those will need clear 2 way IP communication channel. The Authors propose a strategy for IPv6 introduction into operator infrastructure based on the current network architecture present service portfolio and several transition mechanisms. The strategy has been applied in laboratory with setup close enough to the current operator’s network. The criterion for a successful experiment is full two-way IPv6 application layer connectivity between the IPv6 server and the IPv6 Internet of Things (IoT) cloud

Quality assessment technique for ubiquitous software and middleware

The new paradigm of computing or information systems is ubiquitous computing systems. The technology-oriented issues of ubiquitous computing systems have made researchers pay much attention to the feasibility study of the technologies rather than building quality assurance indices or guidelines. In this context, measuring quality is the key to developing high-quality ubiquitous computing products. For this reason, various quality models have been defined, adopted and enhanced over the years, for example, the need for one recognised standard quality model (ISO/IEC 9126) is the result of a consensus for a software quality model on three levels: characteristics, sub-characteristics, and metrics. However, it is very much unlikely that this scheme will be directly applicable to ubiquitous computing environments which are considerably different to conventional software, trailing a big concern which is being given to reformulate existing methods, and especially to elaborate new assessment techniques for ubiquitous computing environments. This paper selects appropriate quality characteristics for the ubiquitous computing environment, which can be used as the quality target for both ubiquitous computing product evaluation processes ad development processes. Further, each of the quality characteristics has been expanded with evaluation questions and metrics, in some cases with measures. In addition, this quality model has been applied to the industrial setting of the ubiquitous computing environment. These have revealed that while the approach was sound, there are some parts to be more developed in the future

The simplicity project: easing the burden of using complex and heterogeneous ICT devices and services

As of today, to exploit the variety of different "services", users need to configure each of their devices by using different procedures and need to explicitly select among heterogeneous access technologies and protocols. In addition to that, users are authenticated and charged by different means. The lack of implicit human computer interaction, context-awareness and standardisation places an enormous burden of complexity on the shoulders of the final users. The IST-Simplicity project aims at leveraging such problems by: i) automatically creating and customizing a user communication space; ii) adapting services to user terminal characteristics and to users preferences; iii) orchestrating network capabilities. The aim of this paper is to present the technical framework of the IST-Simplicity project. This paper is a thorough analysis and qualitative evaluation of the different technologies, standards and works presented in the literature related to the Simplicity system to be developed

A Smart Electric Wheelchair Using UPnP

People with disabilities in general, and wheelchair users in particular, are one of the groups of people that may benefit more from Ambient Intelligent (AmI) Systems, enhancing their autonomy and quality of life. However, current wheelchairs are usually not equipped with devices capable of accessing services in AmI environments. In this paper, we describe how an electric wheelchair is equipped with an UPnP based module that allows the integration in AmI systems.Ministerio de Ciencia y Tecnología TIC2001-1868-C03-0