NoC Design Flow for TDMA and QoS Management in a GALS Context

International audienceThis paper proposes a new approach dealing with the tedious problem of NoC guaranteed traffics according to GALS constraints impelled by the upcoming large System-on-Chips with multiclock domains. Our solution has been designed to adjust a tradeoff between synchronous and clockless asynchronous techniques. By means of smart interfaces between synchronous sub-NoCs, Quality-of-Service (QoS) for guaranteed traffic is assured over the entire chip despite clock heterogeneity. This methodology can be easily integrated in the usual NoC design flow as an extension to traditional NoC synchronous design flows. We present real implementation obtained with our tool for a 4G telecom scheme

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

Interference analysis for optical wireless communications in Network-on-Chip (NoC) scenarios

Optical wireless (OW) communications, besides being of great interest for indoor and outdoor applications, have been recently proposed as a powerful alternative to the existing wired and wireless radio frequency (RF) interconnects in network-on-chips (NoCs). Design and analysis of networks with OW links require a careful investigation of cross-link interference, which impacts considerably the efficiency of systems that reuse the same channel for multiple transmissions. Yet, there is no comprehensive analysis of interference for OW NoCs, and the analyses of crosstalk in optical waveguide communications usually rely on synchronous data transmissions. A novel framework for the analysis of on-chip OW communications in the presence of cross-link cochannel interference and noise is proposed, where asynchronous data transmissions are considered. Self-beating of interfering signals is also considered, which was often neglected in previous literature. The bit error probability (BEP) for arbitrary number of interfering sources is derived as a function of signal-to-noise ratio (SNR), interference powers, detection threshold and pulse shaping, using both exact and approximation methods. The proposed analysis can be applied to both noise- and interference-limited cases, and enables a system designer to evaluate reuse distance between links that share the same optical carrier for simultaneous communication in NoCs

Functional and Performance Analysis of Network-on-Chips Using Actor-based Modeling and Formal Verification

Network on Chip (NoC) has emerged as a promising architecture paradigmfor todays many-core systems. As complexity grows in NoCs, functional verificationand performance prediction in the early stages of the design process are suggestedas ways to reduce the fabrication cost. Formal methods have gained moreattention as alternative ways for analyzing NoC designs. In this paper we propose amethod to model different characteristics of the system, and also verify various functionaland performance properties by generating the full state space of the model fordifferent scenarios. We present a formal model for two-dimensional mesh GloballyAsynchronous Locally Synchronous (GALS) NoCs with four-phase handshakecommunication protocol, using the actor-based modeling language Rebeca. Functionaland timing behaviors, routing algorithm and communication protocol are capturedin the model. Deadlock freedom, message arrival, and end-to-end packet latencyare checked. In order to analyze large NoCs we propose a scalable approachbased on compositional verification for estimating maximum end-to-end packet latency.The compositional approach is specific for the XY-routing algorithm. Resultsof verification are compared and matched to simulation results of HSPICE using32nm technology

An efficient asynchronous spatial division multiplexing router for network-on-chip on the hardware platform

The quasi-delay-insensitive (QDI) based asynchronous network-on-chip (ANoC) has several advantages over clock-based synchronous network-on-chips (NoCs). The asynchronous router uses a virtual channel (VC) as a primary flow-control mechanism however, the spatial division multiplexing (SDM) based mechanism performs better over input traffics over VC. This manuscript uses an asynchronous spatial division multiplexing (ASDM) based router for NoC architecture on a field-programmable gate array (FPGA) platform. The ASDM router is configurable to different bandwidths and VCs. The ASDM router mainly contains input-output (I/O) buffers, a switching allocator, and a crossbar unit. The 4-phase 1-of-4 dual-rail protocol is used to construct the I/O buffers. The performance of the ASDM router is analyzed in terms of lower urinary tract symptoms (LUTs) (chip area), delay, latency, and throughput parameters. The work is implemented using Verilog-HDL with Xilinx ISE 14.7 on artix-7 FPGA. The ASDM router achieves % chip area and obtains 0.8 ns of latency with a throughput of 800 Mfps. The proposed router is compared with existing asynchronous approaches with improved latency and throughput metrics

Network-on-Chip Synchronization

Technology scaling has enabled the number of cores within a System on Chip (SoC) to increase significantly. Globally Asynchronous Locally Synchronous (GALS) systems using Dynamic Voltage and Frequency Scaling (DVFS) operate each of these cores on distinct and dynamic clock domains. The main communication method between these cores is increasingly more likely to be a Network-on-Chip (NoC). Typically, the interfaces between these clock domains experience multi-cycle synchronization latencies due to their use of “brute-force” synchronizers. This dissertation aims to improve the performance of NoCs and thereby SoCs as a whole by reducing this synchronization latency. First, a survey of NoC improvement techniques is presented. One such improvement technique: a multi-layer NoC, has been successfully simulated. Given how one of the most commonly used techniques is DVFS, a thorough analysis and simulation of brute-force synchronizer circuits in both current and future process technologies is presented. Unfortunately, a multi-cycle latency is unavoidable when using brute-force synchronizers, so predictive synchronizers which require only a single cycle of latency have been proposed. To demonstrate the impact of these predictive synchronizer circuits at a high level, multi-core system simulations incorporating these circuits have been completed. Multiple forms of GALS NoC configurations have been simulated, including multi-synchronous, NoC-synchronous, and single-synchronizer. Speedup on the SPLASH benchmark suite was measured to directly quantify the performance benefit of predictive synchronizers in a full system. Additionally, Mean Time Between Failures (MTBF) has been calculated for each NoC synchronizer configuration to determine the reliability benefit possible when using predictive synchronizers

Bandwidth optimization in asynchronous NoCs by customizing link wire length

Journal ArticleThe bandwidth requirement for each link on a network-on-chip (NoC) may differ based on topology and traffic properties of the IP cores. Available bandwidth on an asynchronous NoC link will also vary depending on the wire length between sender and receiver. We explore the benefit to NoC performance when this property is used to increase bandwidth on specific links that carry the most traffic of an SoC design. Two methods are used to accomplish this: specifying router locations on the floorplan, and adding pipeline latches on long links. Energy and latency characteristics of an asynchronous NoC are compared to a similarly-designed synchronous NoC. The results indicate that the asynchronous network has lower energy, and link-specific bandwidth optimization has improved the average packet latency. Adding pipeline latches to congested links yields the most improvement. This link-specific optimization is applicable not only to the router and network we present here, but any asynchronous NoC used in a eterogeneous SoC

An Energy and Performance Exploration of Network-on-Chip Architectures

In this paper, we explore the designs of a circuit-switched router, a wormhole router, a quality-of-service (QoS) supporting virtual channel router and a speculative virtual channel router and accurately evaluate the energy-performance tradeoffs they offer. Power results from the designs placed and routed in a 90-nm CMOS process show that all the architectures dissipate significant idle state power. The additional energy required to route a packet through the router is then shown to be dominated by the data path. This leads to the key result that, if this trend continues, the use of more elaborate control can be justified and will not be immediately limited by the energy budget. A performance analysis also shows that dynamic resource allocation leads to the lowest network latencies, while static allocation may be used to meet QoS goals. Combining the power and performance figures then allows an energy-latency product to be calculated to judge the efficiency of each of the networks. The speculative virtual channel router was shown to have a very similar efficiency to the wormhole router, while providing a better performance, supporting its use for general purpose designs. Finally, area metrics are also presented to allow a comparison of implementation costs