Digital and analog TFET circuits: Design and benchmark

In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions

Digital and analog TFET circuits: Design and benchmark

In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions

Strained Silicon Complementary TFET SRAM: Experimental Demonstration and Simulations

A half SRAM cell with strained Si nanowire complementary tunnel-FETs (TFETs) was fabricated and characterized to explore the feasibility and functionality of 6T-SRAM based on TFETs. Outward-faced n-TFETs are used as access-transistors. Static measurements were performed to determine the SRAM butterfly curves, allowing the assessment of cell functionality and stability. The forward p-i-n leakage of the access-transistor at certain bias configurations leads to malfunctioning storage operation, even without the contribution of the ambipolar behavior. At large VDD, lowering of the bit-line bias is needed to mitigate such effect, demonstrating functional hold, read and write operations. Circuit simulations were carried out using a Verilog-A compact model calibrated on the experimental TFETs, providing a better understanding of the TFET SRAM operation at different supply voltages and for different cell sizing and giving an estimate of the dynamic performance of the cell

Fault Modeling of Graphene Nanoribbon FET Logic Circuits

[EN] Due to the increasing defect rates in highly scaled complementary metal-oxide-semiconductor (CMOS) devices, and the emergence of alternative nanotechnology devices, reliability challenges are of growing importance. Understanding and controlling the fault mechanisms associated with new materials and structures for both transistors and interconnection is a key issue in novel nanodevices. The graphene nanoribbon field-effect transistor (GNR FET) has revealed itself as a promising technology to design emerging research logic circuits, because of its outstanding potential speed and power properties. This work presents a study of fault causes, mechanisms, and models at the device level, as well as their impact on logic circuits based on GNR FETs. From a literature review of fault causes and mechanisms, fault propagation was analyzed, and fault models were derived for device and logic circuit levels. This study may be helpful for the prevention of faults in the design process of graphene nanodevices. In addition, it can help in the design and evaluation of defect- and fault-tolerant nanoarchitectures based on graphene circuits. Results are compared with other emerging devices, such as carbon nanotube (CNT) FET and nanowire (NW) FET.This work was supported in part by the Spanish Government under the research project TIN2016-81075-R and by Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), under the project 200190032.Gil Tomás, DA.; Gracia-Morán, J.; Saiz-Adalid, L.; Gil, P. (2019). Fault Modeling of Graphene Nanoribbon FET Logic Circuits. Electronics. 8(8):1-18. https://doi.org/10.3390/electronics8080851S11888International Technology Roadmap for Semiconductors (ITRS) 2013http://www.itrs2.net/2013-itrs.htmlSchuegraf, K., Abraham, M. C., Brand, A., Naik, M., & Thakur, R. (2013). Semiconductor Logic Technology Innovation to Achieve Sub-10 nm Manufacturing. IEEE Journal of the Electron Devices Society, 1(3), 66-75. doi:10.1109/jeds.2013.2271582International Technology Roadmap for Semiconductors (ITRS) 2015https://bit.ly/2xiiT8PNovoselov, K. S. (2004). Electric Field Effect in Atomically Thin Carbon Films. Science, 306(5696), 666-669. doi:10.1126/science.1102896Geim, A. K., & Novoselov, K. S. (2007). The rise of graphene. Nature Materials, 6(3), 183-191. doi:10.1038/nmat1849Wu, Y., Farmer, D. B., Xia, F., & Avouris, P. (2013). Graphene Electronics: Materials, Devices, and Circuits. Proceedings of the IEEE, 101(7), 1620-1637. doi:10.1109/jproc.2013.2260311Choudhury, M. R., Youngki Yoon, Jing Guo, & Mohanram, K. (2011). Graphene Nanoribbon FETs: Technology Exploration for Performance and Reliability. IEEE Transactions on Nanotechnology, 10(4), 727-736. doi:10.1109/tnano.2010.2073718Avouris, P. (2010). Graphene: Electronic and Photonic Properties and Devices. Nano Letters, 10(11), 4285-4294. doi:10.1021/nl102824hBanadaki, Y. M., & Srivastava, A. (2015). Scaling Effects on Static Metrics and Switching Attributes of Graphene Nanoribbon FET for Emerging Technology. IEEE Transactions on Emerging Topics in Computing, 3(4), 458-469. doi:10.1109/tetc.2015.2445104Avouris, P., Chen, Z., & Perebeinos, V. (2007). Carbon-based electronics. Nature Nanotechnology, 2(10), 605-615. doi:10.1038/nnano.2007.300Banerjee, S. K., Register, L. F., Tutuc, E., Basu, D., Kim, S., Reddy, D., & MacDonald, A. H. (2010). Graphene for CMOS and Beyond CMOS Applications. Proceedings of the IEEE, 98(12), 2032-2046. doi:10.1109/jproc.2010.2064151Schwierz, F. (2013). Graphene Transistors: Status, Prospects, and Problems. Proceedings of the IEEE, 101(7), 1567-1584. doi:10.1109/jproc.2013.2257633Fregonese, S., Magallo, M., Maneux, C., Happy, H., & Zimmer, T. (2013). Scalable Electrical Compact Modeling for Graphene FET Transistors. IEEE Transactions on Nanotechnology, 12(4), 539-546. doi:10.1109/tnano.2013.2257832Chen, Y.-Y., Sangai, A., Rogachev, A., Gholipour, M., Iannaccone, G., Fiori, G., & Chen, D. (2015). A SPICE-Compatible Model of MOS-Type Graphene Nano-Ribbon Field-Effect Transistors Enabling Gate- and Circuit-Level Delay and Power Analysis Under Process Variation. IEEE Transactions on Nanotechnology, 14(6), 1068-1082. doi:10.1109/tnano.2015.2469647Ferrari, A. C., Bonaccorso, F., Fal’ko, V., Novoselov, K. S., Roche, S., Bøggild, P., … Pugno, N. (2015). Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems. Nanoscale, 7(11), 4598-4810. doi:10.1039/c4nr01600aHong, A. J., Song, E. B., Yu, H. S., Allen, M. J., Kim, J., Fowler, J. D., … Wang, K. L. (2011). Graphene Flash Memory. ACS Nano, 5(10), 7812-7817. doi:10.1021/nn201809kJeng, S.-L., Lu, J.-C., & Wang, K. (2007). A Review of Reliability Research on Nanotechnology. IEEE Transactions on Reliability, 56(3), 401-410. doi:10.1109/tr.2007.903188Srinivasu, B., & Sridharan, K. (2017). A Transistor-Level Probabilistic Approach for Reliability Analysis of Arithmetic Circuits With Applications to Emerging Technologies. IEEE Transactions on Reliability, 66(2), 440-457. doi:10.1109/tr.2016.2642168Teixeira Franco, D., Naviner, J.-F., & Naviner, L. (2006). Yield and reliability issues in nanoelectronic technologies. annals of telecommunications - annales des télécommunications, 61(11-12), 1422-1457. doi:10.1007/bf03219903Lin, Y.-M., Jenkins, K. A., Valdes-Garcia, A., Small, J. P., Farmer, D. B., & Avouris, P. (2009). Operation of Graphene Transistors at Gigahertz Frequencies. Nano Letters, 9(1), 422-426. doi:10.1021/nl803316hLiao, L., Lin, Y.-C., Bao, M., Cheng, R., Bai, J., Liu, Y., … Duan, X. (2010). High-speed graphene transistors with a self-aligned nanowire gate. Nature, 467(7313), 305-308. doi:10.1038/nature09405Wang, X., Tabakman, S. M., & Dai, H. (2008). Atomic Layer Deposition of Metal Oxides on Pristine and Functionalized Graphene. Journal of the American Chemical Society, 130(26), 8152-8153. doi:10.1021/ja8023059Geim, A. K. (2009). Graphene: Status and Prospects. Science, 324(5934), 1530-1534. doi:10.1126/science.1158877Mistewicz, K., Nowak, M., Wrzalik, R., Śleziona, J., Wieczorek, J., & Guiseppi-Elie, A. (2016). Ultrasonic processing of SbSI nanowires for their application to gas sensors. Ultrasonics, 69, 67-73. doi:10.1016/j.ultras.2016.04.004Jesionek, M., Nowak, M., Mistewicz, K., Kępińska, M., Stróż, D., Bednarczyk, I., & Paszkiewicz, R. (2018). Sonochemical growth of nanomaterials in carbon nanotube. Ultrasonics, 83, 179-187. doi:10.1016/j.ultras.2017.03.014Chen, X., Seo, D. H., Seo, S., Chung, H., & Wong, H.-S. P. (2012). Graphene Interconnect Lifetime: A Reliability Analysis. IEEE Electron Device Letters, 33(11), 1604-1606. doi:10.1109/led.2012.2211564Wang, Z. F., Zheng, H., Shi, Q. W., & Chen, J. (2009). Emerging nanodevice paradigm. ACM Journal on Emerging Technologies in Computing Systems, 5(1), 1-19. doi:10.1145/1482613.1482616Dong, J., Xiang, G., Xiang-Yang, K., & Jia-Ming, L. (2007). Atomistic Failure Mechanism of Single Wall Carbon Nanotubes with Small Diameters. Chinese Physics Letters, 24(1), 165-168. doi:10.1088/0256-307x/24/1/045Bu, H., Chen, Y., Zou, M., Yi, H., Bi, K., & Ni, Z. (2009). Atomistic simulations of mechanical properties of graphene nanoribbons. Physics Letters A, 373(37), 3359-3362. doi:10.1016/j.physleta.2009.07.04

Sub-10nm Transistors for Low Power Computing: Tunnel FETs and Negative Capacitance FETs

One of the major roadblocks in the continued scaling of standard CMOS technology is its alarmingly high leakage power consumption. Although circuit and system level methods can be employed to reduce power, the fundamental limit in the overall energy efficiency of a system is still rooted in the MOSFET operating principle: an injection of thermally distributed carriers, which does not allow subthreshold swing (SS) lower than 60mV/dec at room temperature. Recently, a new class of steep-slope devices like Tunnel FETs (TFETs) and Negative-Capacitance FETs (NCFETs) have garnered intense interest due to their ability to surpass the 60mV/dec limit on SS at room temperature. The focus of this research is on the simulation and design of TFETs and NCFETs for ultra-low power logic and memory applications. Using full band quantum mechanical model within the Non-Equilibrium Greens Function (NEGF) formalism, source-underlapping has been proposed as an effective technique to lower the SS in GaSb-InAs TFETs. Band-tail states, associated with heavy source doping, are shown to significantly degrade the SS in TFETs from their ideal value. To solve this problem, undoped source GaSb-InAs TFET in an i-i-n configuration is proposed. A detailed circuit-to-system level evaluation is performed to investigate the circuit level metrics of the proposed devices. To demonstrate their potential in a memory application, a 4T gain cell (GC) is proposed, which utilizes the low-leakage and enhanced drain capacitance of TFETs to realize a robust and long retention time GC embedded-DRAMs. The device/circuit/system level evaluation of proposed TFETs demonstrates their potential for low power digital applications. The second part of the thesis focuses on the design space exploration of hysteresis-free Negative Capacitance FETs (NCFETs). A cross-architecture analysis using HfZrOx ferroelectric (FE-HZO) integrated on bulk MOSFET, fully-depleted SOI-FETs, and sub-10nm FinFETs shows that FDSOI and FinFET configurations greatly benefit the NCFET performance due to their undoped body and improved gate-control which enables better capacitance matching with the ferroelectric. A low voltage NC-FinFET operating down to 0.25V is predicted using ultra-thin 3nm FE-HZO. Next, we propose one-transistor ferroelectric NOR type (Fe-NOR) non-volatile memory based on HfZrOx ferroelectric FETs (FeFETs). The enhanced drain-channel coupling in ultrashort channel FeFETs is utilized to dynamically modulate memory window of storage cells thereby resulting in simple erase-, program-and read-operations. The simulation analysis predicts sub-1V program/erase voltages in the proposed Fe-NOR memory array and therefore presents a significantly lower power alternative to conventional FeRAM and NOR flash memories

Simulation and Modeling of Novel Electronic Device Architectures with NESS (Nano-Electronic Simulation Software): A Modular Nano TCAD Simulation Framework

The modeling of nano-electronic devices is a cost-effective approach for optimizing the semiconductor device performance and for guiding the fabrication technology. In this paper, we present the capabilities of the new flexible multi-scale nano TCAD simulation software called NanoElectronic Simulation Software (NESS). NESS is designed to study the charge transport in contemporary and novel ultra-scaled semiconductor devices. In order to simulate the charge transport in such ultra-scaled devices with complex architectures and design, we have developed numerous simulation modules based on various simulation approaches. Currently, NESS contains a driftdiffusion, Kubo–Greenwood, and non-equilibrium Green’s function (NEGF) modules. All modules are numerical solvers which are implemented in the C++ programming language, and all of them are linked and solved self-consistently with the Poisson equation. Here, we have deployed some of those modules to showcase the capabilities of NESS to simulate advanced nano-scale semiconductor devices. The devices simulated in this paper are chosen to represent the current state-of-the-art and future technologies where quantum mechanical effects play an important role. Our examples include ultra-scaled nanowire transistors, tunnel transistors, resonant tunneling diodes, and negative capacitance transistors. Our results show that NESS is a robust, fast, and reliable simulation platform which can accurately predict and describe the underlying physics in novel ultra-scaled electronic devices.European Union Horizon 2020 - 688101 SUPERAID7EPSRC UKRI Innovation Fellowship - EP/S001131/1 (QSEE), No. EP/P009972/1 (QUANTDEVMOD)H2020-FETOPEN-2019 s- No.862539-Electromed-FET OPEN.No. EP/S000259/1(Variability PDK for design based research on FPGA/neuro computing

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Dielectric-Modulated TFETs as Label-Free Biosensors

This chapter presents tunnel field effect transistors (TFETs) as dielectric-modulated (DM) label-free biosensors, and discusses various aspects related to them. A brief survey of the dielectric-modulated TFET biosensors is presented. The concept of dielectric modulation in TFETs is discussed with focus on principle and design perspectives. A Technology Computer Aided Design (TCAD) based approach to incorporate embedded nanogaps in TFET geometries along with appropriate physics-based simulation models are mentioned. Non-ideal conditions in dielectric-modulated biosensors are brought to light, keeping in view the practical considerations of the devices. A gate engineered TFET is taken up for analysis of sensitivities under different conditions through TCAD simulations. Finally, a status map of the sensitivities of the most significant works in dielectric-modulated label-free biosensors is depicted, and the status of the proposed TFET is highlighted

Miniaturized Transistors

What is the future of CMOS? Sustaining increased transistor densities along the path of Moore's Law has become increasingly challenging with limited power budgets, interconnect bandwidths, and fabrication capabilities. In the last decade alone, transistors have undergone significant design makeovers; from planar transistors of ten years ago, technological advancements have accelerated to today's FinFETs, which hardly resemble their bulky ancestors. FinFETs could potentially take us to the 5-nm node, but what comes after it? From gate-all-around devices to single electron transistors and two-dimensional semiconductors, a torrent of research is being carried out in order to design the next transistor generation, engineer the optimal materials, improve the fabrication technology, and properly model future devices. We invite insight from investigators and scientists in the field to showcase their work in this Special Issue with research papers, short communications, and review articles that focus on trends in micro- and nanotechnology from fundamental research to applications

Vertical III-V Nanowire Transistors for Low-Power Electronics

Power dissipation has been the major challenge in the downscaling of transistor technology. Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) have struggled to keep a low power consumption while still maintaining a high performance due to the low carrier mobilities of Si but also due to their inherent minimum inverse subthreshold slope (S ≥ 60 mV/dec) which is limited by thermionic emission. This thesis work studied the capabilities and limitations of III-V based vertical nanowire n-type Tunneling Field-Effect Transistor (TFET) and p-type MOSFET (PMOS). InAs/InGaAsSb/GaSb heterojunction was employed in the whole study. The main focus was to understand the influence of the device fabrication processes and the structural factors of the nanowires such as band alignment, composition and doping on the electrical performance of the TFET. Optimizations of the device processes including spacer technology improvement, Equivalent Oxide Thickness (EOT) downscaling, and gate underlap/overlap were explored utilizing structural characterizations. Systematic fine tuning of the band alignment of the tunnel junction resultedin achieving the best performing sub-40 mV/dec TFETs with S = 32 mV/decand ION = 4μA/μm for IOFF = 1 nA/μm at VDS = 0.3 V. The suitability of employing TFET for electronic applications at cryogenic temperatures has been explored utilizing experimental device data. The impact of the choice of heterostructure and dopant incorporation were investigated to identify the optimum operating temperature and voltage in different temperature regimes. A novel gate last process self-aligning the gate and drain contacts to the intrinsic and doped segments, respectively was developed for vertical InGaAsSb-GaAsSb core-shell nanowire transistors leading to the first sub-100 mV/dec PMOS with S = 75 mV/dec, significant ION/ IOFF = 104 and IMIN < 1 nA/μm at VDS = -0.5 V