750 research outputs found
AI based Robot Safe Learning and Control
Introduction This open access book mainly focuses on the safe control of robot manipulators. The control schemes are mainly developed based on dynamic neural network, which is an important theoretical branch of deep reinforcement learning. In order to enhance the safety performance of robot systems, the control strategies include adaptive tracking control for robots with model uncertainties, compliance control in uncertain environments, obstacle avoidance in dynamic workspace. The idea for this book on solving safe control of robot arms was conceived during the industrial applications and the research discussion in the laboratory. Most of the materials in this book are derived from the authors’ papers published in journals, such as IEEE Transactions on Industrial Electronics, neurocomputing, etc. This book can be used as a reference book for researcher and designer of the robotic systems and AI based controllers, and can also be used as a reference book for senior undergraduate and graduate students in colleges and universities
Control Techniques for Robot Manipulator Systems with Modeling Uncertainties
This dissertation describes the design and implementation of various nonlinear control strategies for robot manipulators whose dynamic or kinematic models are uncertain. Chapter 2 describes the development of an adaptive task-space tracking controller for robot manipulators with uncertainty in the kinematic and dynamic models. The controller is developed based on the unit quaternion representation so that singularities associated with the otherwise commonly used three parameter representations are avoided. Experimental results for a planar application of the Barrett whole arm manipulator (WAM) are provided to illustrate the performance of the developed adaptive controller. The controller developed in Chapter 2 requires the assumption that the manipulator models are linearly parameterizable. However there might be scenarios where the structure of the manipulator dynamic model itself is unknown due to difficulty in modeling. One such example is the continuum or hyper-redundant robot manipulator. These manipulators do not have rigid joints, hence, they are difficult to model and this leads to significant challenges in developing high-performance control algorithms. In Chapter 3, a joint level controller for continuum robots is described which utilizes a neural network feedforward component to compensate for dynamic uncertainties. Experimental results are provided to illustrate that the addition of the neural network feedforward component to the controller provides improved tracking performance. While Chapter\u27s 2 and 3 described two different joint controllers for robot manipulators, in Chapter 4 a controller is developed for the specific task of whole arm grasping using a kinematically redundant robot manipulator. The whole arm grasping control problem is broken down into two steps; first, a kinematic level path planner is designed which facilitates the encoding of both the end-effector position as well as the manipulators self-motion positioning information as a desired trajectory for the manipulator joints. Then, the controller described in Chapter 3, which provides asymptotic tracking of the encoded desired joint trajectory in the presence of dynamic uncertainties is utilized. Experimental results using the Barrett Whole Arm Manipulator are presented to demonstrate the validity of the approach
Recommended from our members
Adaptive control of robotic manipulators with unified motion constraints
In this paper, we present an adaptive control of robotic manipulators with parametric uncertainties and motion constraints. Position and velocity constraints are considered and they are unified and converted into the constraint of the nominal input. An adaptive neural network control is developed to achieve trajectory tracking, while the problems of motion constraints are addressed by considering the saturation effect of the nominal input. The uniform boundedness of all closed-loop signals is verified through Lyapunov analysis. Simulation and experiment results on a 2 DOF robotic manipulator demonstrate the effectiveness of the proposed method
Nonlinear Control Techniques for Robot Manipulators
This Masters thesis describes the design and implementation of control strategies for the following topics of research: i) Whole Arm Grasping Control for Redundant Robot Manipulators, ii) Neural Network Grasping Controller for Continuum Robots and, iii) Coordination Control for Haptic and Teleoperator Systems. An approach to whole arm grasping of objects using redundant robot manipulators is presented. A kinematic control which facilitates the encoding of both the end-effector position, as well as body self-motion positioning information as a desired trajectory signal for the manipulator joints is developed. An approach is presented to whole arm grasping control for continuum robots. The grasping controller is developed in two stages; high level path planning for the grasping objective, and a low level joint controller using a neural network feedforward component to compensate for dynamic uncertainties. Lastly, two controllers are developed for nonlinear haptic and teleoperator systems for coordination of the master and slave systems
Control of Flexible Manipulator Robots Based on Dynamic Confined Space of Velocities: Dynamic Programming Approach
Linear Parameter Varying models-based Model Predictive Control (LPV-MPC) has stood out in manipulator robots because it presents well-rejection to dynamic uncertainties in flexible joints. However, it has become too weak when the MPC's optimization problem does not include kinematic constraints-based conditions. This paper uses dynamic confined space of velocities (DCSV) to include these conditions as a recursive polytopic constraint, guaranteeing optimal dependency on a simplex scheduling parameter. To this end, the local frame's velocities and torque/force preload of joints (related to violation of kinematic constraints) are associated with different time scale dynamics such that DCSV correlates them as a polytope. So, a classical LPV-MPC will be updated using a dynamic programming approach according to the DCSV-based polytope. As a result, one lemma about DCSV-based recursive polytope and a five-step procedure for two decoupled close-loop schemes with different time scales compose the LPV-MPC proposed method. Numerical validation shows that even for relevant flexibility situations, trajectory tracking performance is improved by tuning finite horizons and optimization problem constraints regarding DCSV's behavior
- …