Engineering for a Changing World: 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017 : programme

In 2017, the Ilmenau Scientific Colloquium is again organised by the Department of Mechanical Engineering. The title of this year’s conference “Engineering for a Changing World” refers to limited natural resources of our planet, to massive changes in cooperation between continents, countries, institutions and people – enabled by the increased implementation of information technology as the probably most dominant driver in many fields. The Colloquium, complemented by workshops, is characterised by the following topics, but not limited to them: – Precision Engineering and Metrology – Industry 4.0 and Digitalisation in Mechanical Engineering – Mechatronics, Biomechatronics and Mechanism Technology – Systems Technology – Innovative Metallic Materials The topics are oriented on key strategic aspects of research and teaching in Mechanical Engineering at our university

Shaping the future by engineering: 58th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, 8 - 12 September 2014 ; programme

Druckausgabe erschienen im Universitätsverlag Ilmenau: Shaping the future by engineering : 58th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, 8 - 12 September 2014 ; programme / Department of Mechanical Engineering, Technische Universität Ilmenau. [Hrsg.: Peter Scharff. Red.: Andrea Schneider] Ilmenau : Univ.-Verl. Ilmenau, 2014. - 155 S. ISBN 978-3-86360-085-

Advances in High-Speed Atomic Force Microscopy

High-speed atomic force microscopy (HS-AFM) is a scanning probe technique capable of recording processes at the nanometre scale in real time. By sequentially increasing the speed of individual microscope components, images of surfaces can be recorded at up to several images per second. We present a HS-AFM platform composed of custom¿built measurement head, controller and software, scanners and amplifiers that is shared with the community in an open¿hardware fashion. A new scanner design combined with an advanced control system is shown. The simple addition of a secondary actuator to widely available tube scanners increases the scan speed by over an order of magnitude while allowing for a 130 ¿m × 130 ¿m wide field of view, which is not possible with traditional high¿speed scanner designs. Controllers beyond standard proportional-integral controllers are capable of significantly increasing imaging speed by anticipating resonances. Such filters are cumbersome to design with conventional methods. It is shown how convex optimization can be used to design optimal controllers with guaranteed stability for atomic force microscopy in an automated fashion. By integrating two lasers into the small spot¿size optics of an AFM readout head we are able to use the first laser for detecting the deflection of the smallest, and thus fastest currently available high¿speed cantilevers, while using the second for photo¿thermal actuation. Using this instrument, we demonstrate multi¿frequency atomic force microscopy (MF-AFM) at previously not accessible frequencies of more than 20 MHz. By employing the driving laser not for resonant excitation as is usual in dynamic AFM, a new imaging mode, photothermal off-resonance tapping (PORT) is presented. By repeatedly thermally bending the cantilever below it¿s resonant frequency, the surface is probed at a rapid rate. The resulting force is extracted from the deflection of the cantilever in time¿ domain at real time and used for feedback and image generation. The dynamic and static force contributions in both PORT and state of the art high-speed amplitude modulation atomic force microscopy (AM-AFM) are measured and analyzed in detail. It is shown that by decoupling the driving frequency from the resonant frequency the dynamic tip¿sample impact forces can be drastically reduced when compared to resonance based AFM modes. SAS-6 is a centriolar scaffolding protein with a crucial role in the duplication of centrioles, which are the main microtubule organizing organelle of eukaryotic cells. Defects in centriole duplication are associated with cancer and microencephaly. To understand these defects, is therefore important to understand the kinetics of SAS-6. In¿vitro, SAS-6 polymerizes into rings of between eight and ten monomers. Using the new PORT mode we are able to study the dynamic assembly of SAS-6. It is shown how SAS-6 rings can not only assemble by canonical one-by-one addition, but can form as a fusion of larger, already assembled fragments. Finally, it is shown how PORT can be used to observe fast processes of and on living cells. The adhesion and detachment of thrombocyte cells is studied. Membrane disruptive effects are shown on gram¿negative as well as gram¿positive bacteria

LASER Tech Briefs, Fall 1994

Topics in this issue of LASER Tech briefs include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Fabrication Technology, Mathematics and Information Sciences, and Life Science

NASA Tech Briefs, June 1996

Topics: New Computer Hardware; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences;Books and Reports

Applied Mathematics to Mechanisms and Machines

This book brings together all 16 articles published in the Special Issue "Applied Mathematics to Mechanisms and Machines" of the MDPI Mathematics journal, in the section “Engineering Mathematics”. The subject matter covered by these works is varied, but they all have mechanisms as the object of study and mathematics as the basis of the methodology used. In fact, the synthesis, design and optimization of mechanisms, robotics, automotives, maintenance 4.0, machine vibrations, control, biomechanics and medical devices are among the topics covered in this book. This volume may be of interest to all who work in the field of mechanism and machine science and we hope that it will contribute to the development of both mechanical engineering and applied mathematics