Wideband CMOS Data Converters for Linear and Efficient mmWave Transmitters

With continuously increasing demands for wireless connectivity, higher\ua0carrier frequencies and wider bandwidths are explored. To overcome a limited transmit power at these higher carrier frequencies, multiple\ua0input multiple output (MIMO) systems, with a large number of transmitters\ua0and antennas, are used to direct the transmitted power towards\ua0the user. With a large transmitter count, each individual transmitter\ua0needs to be small and allow for tight integration with digital circuits. In\ua0addition, modern communication standards require linear transmitters,\ua0making linearity an important factor in the transmitter design.In this thesis, radio frequency digital-to-analog converter (RF-DAC)-based transmitters are explored. They shift the transition from digital\ua0to analog closer to the antennas, performing both digital-to-analog\ua0conversion and up-conversion in a single block. To reduce the need for\ua0computationally costly digital predistortion (DPD), a linear and wellbehaved\ua0RF-DAC transfer characteristic is desirable. The combination\ua0of non-overlapping local oscillator (LO) signals and an expanding segmented\ua0non-linear RF-DAC scaling is evaluated as a way to linearize\ua0the transmitter. This linearization concept has been studied both for\ua0the linearization of the RF-DAC itself and for the joint linearization of\ua0the cascaded RF-DAC-based modulator and power amplifier (PA) combination.\ua0To adapt the linearization, observation receivers are needed.\ua0In these, high-speed analog-to-digital converters (ADCs) have a central\ua0role. A high-speed ADC has been designed and evaluated to understand\ua0how concepts used to increase the sample rate affect the dynamic performance

Field programmable gate array based multiple input multiple output transmitter

MIMO is an advanced antenna technology compared to Single Input Single output (SISO), Multiple Input Single Output (MISO), and Single Input Multiple Output (SIMO) and is used to obtain high data rate in the system. Multiple-Input Multiple-Output (MIMO) systems have at least two transmitting antennas, each generating unique signals. However some applications may require three, four, or more transmitting devices to achieve the desired system performance. This thesis describes a comparison between different approaches like the microcontroller, ASICs and the FPGA available in the market for baseband signal generation. It also describes the design of a scalable MIMO transmitter, based on field programmable gate array (FPGA) technology that was selected among the processors due to its capability to provide reconfigurable hardware and software. Each module of the MIMO transmitter contains a FPGA, and associated digital-to-analog converters, I/Q modulators, and RF amplifiers needed to power one of the MIMO transmitters. The system is designed to handle up to a 10 Mbps data rate, and transmit signals in the unlicensed 2.4 GHz ISM band --Abstract, page iii

Data Conversion in Area-Constrained Applications: the Wireless Network-on-Chip Case

Network-on-Chip (NoC) is currently the paradigm of choice to interconnect the different components of System-on-Chips (SoCs) or Chip Multiprocessors (CMPs). As the levels of integration continue to grow, however, current NoCs face significant scalability limitations and have prompted research in novel interconnect technologies. Among these, wireless intra-chip communications have been under intense scrutiny due to their low latency broadcast and architectural flexibility. Thus far, the practicality of the idea has been studied from the RF front-end and the network interface perspectives, whereas little to no attention has been placed on another essential component: the data converters. This article aims to fill this gap by providing a comprehensive analysis of the requirements of the scenario, as well as of the current performance and cost trends of Analog-to-Digital Converters (ADCs). Based on Murmann's data, we demonstrate that ADCs will not be a roadblock for the realization of wireless intra-chip communications although current designs do not meet their demands fully.Comment: Presented at DCIS 201

Architectures and Integrated Circuits for Efficient, High-power "Digital'' Transmitters for Millimeter-wave Applications

This thesis presents architectures and integrated circuits for the implementation of energy-efficient, high-power "digital'' transmitters to realize high-speed long-haul links at millimeter-wave frequencies in nano-scale silicon-based processes

System-on-chip Computing and Interconnection Architectures for Telecommunications and Signal Processing

This dissertation proposes novel architectures and design techniques targeting SoC building blocks for telecommunications and signal processing applications. Hardware implementation of Low-Density Parity-Check decoders is approached at both the algorithmic and the architecture level. Low-Density Parity-Check codes are a promising coding scheme for future communication standards due to their outstanding error correction performance. This work proposes a methodology for analyzing effects of finite precision arithmetic on error correction performance and hardware complexity. The methodology is throughout employed for co-designing the decoder. First, a low-complexity check node based on the P-output decoding principle is designed and characterized on a CMOS standard-cells library. Results demonstrate implementation loss below 0.2 dB down to BER of 10^{-8} and a saving in complexity up to 59% with respect to other works in recent literature. High-throughput and low-latency issues are addressed with modified single-phase decoding schedules. A new "memory-aware" schedule is proposed requiring down to 20% of memory with respect to the traditional two-phase flooding decoding. Additionally, throughput is doubled and logic complexity reduced of 12%. These advantages are traded-off with error correction performance, thus making the solution attractive only for long codes, as those adopted in the DVB-S2 standard. The "layered decoding" principle is extended to those codes not specifically conceived for this technique. Proposed architectures exhibit complexity savings in the order of 40% for both area and power consumption figures, while implementation loss is smaller than 0.05 dB. Most modern communication standards employ Orthogonal Frequency Division Multiplexing as part of their physical layer. The core of OFDM is the Fast Fourier Transform and its inverse in charge of symbols (de)modulation. Requirements on throughput and energy efficiency call for FFT hardware implementation, while ubiquity of FFT suggests the design of parametric, re-configurable and re-usable IP hardware macrocells. In this context, this thesis describes an FFT/IFFT core compiler particularly suited for implementation of OFDM communication systems. The tool employs an accuracy-driven configuration engine which automatically profiles the internal arithmetic and generates a core with minimum operands bit-width and thus minimum circuit complexity. The engine performs a closed-loop optimization over three different internal arithmetic models (fixed-point, block floating-point and convergent block floating-point) using the numerical accuracy budget given by the user as a reference point. The flexibility and re-usability of the proposed macrocell are illustrated through several case studies which encompass all current state-of-the-art OFDM communications standards (WLAN, WMAN, xDSL, DVB-T/H, DAB and UWB). Implementations results are presented for two deep sub-micron standard-cells libraries (65 and 90 nm) and commercially available FPGA devices. Compared with other FFT core compilers, the proposed environment produces macrocells with lower circuit complexity and same system level performance (throughput, transform size and numerical accuracy). The final part of this dissertation focuses on the Network-on-Chip design paradigm whose goal is building scalable communication infrastructures connecting hundreds of core. A low-complexity link architecture for mesochronous on-chip communication is discussed. The link enables skew constraint looseness in the clock tree synthesis, frequency speed-up, power consumption reduction and faster back-end turnarounds. The proposed architecture reaches a maximum clock frequency of 1 GHz on 65 nm low-leakage CMOS standard-cells library. In a complex test case with a full-blown NoC infrastructure, the link overhead is only 3% of chip area and 0.5% of leakage power consumption. Finally, a new methodology, named metacoding, is proposed. Metacoding generates correct-by-construction technology independent RTL codebases for NoC building blocks. The RTL coding phase is abstracted and modeled with an Object Oriented framework, integrated within a commercial tool for IP packaging (Synopsys CoreTools suite). Compared with traditional coding styles based on pre-processor directives, metacoding produces 65% smaller codebases and reduces the configurations to verify up to three orders of magnitude

Enabling high-performance, mixed-signal approximate computing

textFor decades, the semiconductor industry enjoyed exponential improvements in microprocessor power and performance with the device scaling of successive technology generations. Scaling limitations at sub-micron technologies, however, have ceased to provide these historical performance improvements within a limited power budget. While device scaling provides a larger number of transistors per chip, for the same chip area, a growing percentage of the chip will have to be powered off at any given time due to power constraints. As such, the architecture community has focused on energy-efficient designs and is looking to specialized hardware to provide gains in performance. A focus on energy efficiency, along with increasingly less reliable transistors due to device scaling, has led to research in the area of approximate computing, where accuracy is traded for energy efficiency when precise computation is not required. There is a growing body of approximation-tolerant applications that, for example, compute on noisy or incomplete data, such as real-world sensor inputs, or make approximations to decrease the computation load in the analysis of cumbersome data sets. These approximation-tolerant applications span application domains, such as machine learning, image processing, robotics, and financial analysis, among others. Since the advent of the modern processor, computing models have largely presumed the attribute of accuracy. A willingness to relax accuracy requirements, however, with goal of gaining energy efficiency, warrants the re-investigation of the potential of analog computing. Analog hardware offers the opportunity for fast and low-power computation; however, it presents challenges in the form of accuracy. Where analog compute blocks have been applied to solve fixed-function problems, general-purpose computing has relied on digital hardware implementations that provide generality and programmability. The work presented in this thesis aims to answer the following questions: Can analog circuits be successfully integrated into general-purpose computing to provide performance and energy savings? And, what is required to address the historical analog challenges of inaccuracy, programmability, and a lack of generality to enable such an approach? This thesis work investigates a neural approach as a means to address the historical analog challenges of inaccuracy, programmability, and generality and to enable the use of analog circuits in general-purpose, high-performance computing. The first piece of this thesis work investigates the use of analog circuits at the microarchitecture level in the form of an analog neural branch predictor. The task of branch prediction can tolerate imprecision, as roll-back mechanisms correct for branch mispredictions, and application-level accuracy remains unaffected. We show that analog circuits enable the implementation of a highly-accurate, neural-prediction algorithm that is infeasible to implement in the digital domain. The second piece of this thesis work presents a neural accelerator that targets approximation-tolerant code. Analog neural acceleration provides application speedup of 3.3x and energy savings of 12.1x with a quality loss less than 10% for all except one approximation-tolerant benchmark. These results show that, using a neural approach, analog circuits can be applied to provide performance and energy efficiency in high-performance, general-purpose computing.Computer Science