351 research outputs found
Doctor of Philosophy
dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy
Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review
The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER
Circuit design and analysis for on-FPGA communication systems
On-chip communication system has emerged as a prominently important subject in Very-Large-
Scale-Integration (VLSI) design, as the trend of technology scaling favours logics more than interconnects.
Interconnects often dictates the system performance, and, therefore, research for new
methodologies and system architectures that deliver high-performance communication services
across the chip is mandatory. The interconnect challenge is exacerbated in Field-Programmable
Gate Array (FPGA), as a type of ASIC where the hardware can be programmed post-fabrication.
Communication across an FPGA will be deteriorating as a result of interconnect scaling. The programmable
fabrics, switches and the specific routing architecture also introduce additional latency
and bandwidth degradation further hindering intra-chip communication performance.
Past research efforts mainly focused on optimizing logic elements and functional units in FPGAs.
Communication with programmable interconnect received little attention and is inadequately understood.
This thesis is among the first to research on-chip communication systems that are built on
top of programmable fabrics and proposes methodologies to maximize the interconnect throughput
performance. There are three major contributions in this thesis: (i) an analysis of on-chip
interconnect fringing, which degrades the bandwidth of communication channels due to routing
congestions in reconfigurable architectures; (ii) a new analogue wave signalling scheme that significantly
improves the interconnect throughput by exploiting the fundamental electrical characteristics
of the reconfigurable interconnect structures. This new scheme can potentially mitigate
the interconnect scaling challenges. (iii) a novel Dynamic Programming (DP)-network to provide
adaptive routing in network-on-chip (NoC) systems. The DP-network architecture performs runtime
optimization for route planning and dynamic routing which, effectively utilizes the in-silicon
bandwidth. This thesis explores a new horizon in reconfigurable system design, in which new
methodologies and concepts are proposed to enhance the on-FPGA communication throughput
performance that is of vital importance in new technology processes
Recommended from our members
Synthesis of On-Chip Interconnection Structures:From Point-to-Point Links to Networks-on-Chip
Packet-switched networks-on-chip (NOC) have been advocated as the solution to the challenge of organizing efficient and reliable communication structures among the components of a system-on-chip (SOC). A critical issue in designing a NOC is to determine its topology given the set of point-to-point communication requirements among these components. We present a novel approach to on-chip communication synthesis that is based on the iterative combination of two efficient computational steps: (1) an application of the k-Median algorithm to coarsely determine the global communication structure (which may turned out not be a network after all), and a (2) a variation of the shortest-path algorithm in order to finely tune the data flows on the communication channels. The application of our method to case studies taken from the literature shows that we can automatically synthesize optimal NOC topologies for multi-core on-chip processors and it offers new insights on why NOC are not necessarily a value proposition for some classes of applcation-specific SOCs
Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip
The sustained demand for faster, more powerful chips has been met by the
availability of chip manufacturing processes allowing for the integration of increasing
numbers of computation units onto a single die. The resulting outcome,
especially in the embedded domain, has often been called SYSTEM-ON-CHIP
(SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC).
MPSoC design brings to the foreground a large number of challenges, one of
the most prominent of which is the design of the chip interconnection. With a
number of on-chip blocks presently ranging in the tens, and quickly approaching
the hundreds, the novel issue of how to best provide on-chip communication
resources is clearly felt.
NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable
answer to this design concern. By bringing large-scale networking concepts to
the on-chip domain, they guarantee a structured answer to present and future
communication requirements. The point-to-point connection and packet switching
paradigms they involve are also of great help in minimizing wiring overhead
and physical routing issues. However, as with any technology of recent inception,
NoC design is still an evolving discipline. Several main areas of interest
require deep investigation for NoCs to become viable solutions:
• The design of the NoC architecture needs to strike the best tradeoff among
performance, features and the tight area and power constraints of the onchip
domain.
• Simulation and verification infrastructure must be put in place to explore,
validate and optimize the NoC performance.
• NoCs offer a huge design space, thanks to their extreme customizability in
terms of topology and architectural parameters. Design tools are needed
to prune this space and pick the best solutions.
• Even more so given their global, distributed nature, it is essential to evaluate
the physical implementation of NoCs to evaluate their suitability for
next-generation designs and their area and power costs.
This dissertation performs a design space exploration of network-on-chip architectures,
in order to point-out the trade-offs associated with the design of
each individual network building blocks and with the design of network topology
overall. The design space exploration is preceded by a comparative analysis
of state-of-the-art interconnect fabrics with themselves and with early networkon-
chip prototypes. The ultimate objective is to point out the key advantages
that NoC realizations provide with respect to state-of-the-art communication
infrastructures and to point out the challenges that lie ahead in order to make
this new interconnect technology come true. Among these latter, technologyrelated
challenges are emerging that call for dedicated design techniques at all
levels of the design hierarchy. In particular, leakage power dissipation, containment
of process variations and of their effects. The achievement of the above
objectives was enabled by means of a NoC simulation environment for cycleaccurate
modelling and simulation and by means of a back-end facility for the
study of NoC physical implementation effects. Overall, all the results provided
by this work have been validated on actual silicon layout
Master of Science
thesisThis thesis designs, implements, and evaluates modular Open Core Protocol (OCP) interfaces for Intellectual Property (IP) cores and Network-on-Chip (NoC) that re- duces System-On-Chip (SoC) design time and enables research on di erent architectural sequencing control methods. To utilize the NoCs design time optimization feature at the boundaries, a standardized industry socket was required, which can address the SoC shorter time-to-market requirements, design issues, and also the subsequent reuse of developed IP cores. OCP is an open industry standard socket interface speci cation used in this research to enable the IP cores reusability across multiple SoC designs. This research work designs and implements clocked OCP interfaces between IP cores and On-Chip Network Fabric (NoC), in single- and multi- frequency clocked domains. The NoC interfaces between IP cores and on-chip network fabric are implemented using the standard network interface structure. It consists of back-end and front-end submodules corresponding to customized interfaces to IP cores or network fabric and OCP Master and Slave entities, respectively. A generic domain interface (DI) protocol is designed which acts as the bridge between back-end and front-end submodules for synchronization and data ow control. Clocked OCP interfaces are synthesized, placed and routed using IBM's 65nm process technology. The implemented designs are veri ed for OCP compliance using SOLV (Sonics OCP Library for Veri cation). Finally, this thesis reports the performance metrics such as design target frequency of operation, latency, area, energy per transaction, and maximum bandwidth across network on-chip for single- and multifrequency clocked designs
Doctor of Philosophy
dissertationCommunication surpasses computation as the power and performance bottleneck in forthcoming exascale processors. Scaling has made transistors cheap, but on-chip wires have grown more expensive, both in terms of latency as well as energy. Therefore, the need for low energy, high performance interconnects is highly pronounced, especially for long distance communication. In this work, we examine two aspects of the global signaling problem. The first part of the thesis focuses on a high bandwidth asynchronous signaling protocol for long distance communication. Asynchrony among intellectual property (IP) cores on a chip has become necessary in a System on Chip (SoC) environment. Traditional asynchronous handshaking protocol suffers from loss of throughput due to the added latency of sending the acknowledge signal back to the sender. We demonstrate a method that supports end-to-end communication across links with arbitrarily large latency, without limiting the bandwidth, so long as line variation can be reliably controlled. We also evaluate the energy and latency improvements as a result of the design choices made available by this protocol. The use of transmission lines as a physical interconnect medium shows promise for deep submicron technologies. In our evaluations, we notice a lower energy footprint, as well as vastly reduced wire latency for transmission line interconnects. We approach this problem from two sides. Using field solvers, we investigate the physical design choices to determine the optimal way to implement these lines for a given back-end-of-line (BEOL) stack. We also approach the problem from a system designer's viewpoint, looking at ways to optimize the lines for different performance targets. This work analyzes the advantages and pitfalls of implementing asynchronous channel protocols for communication over long distances. Finally, the innovations resulting from this work are applied to a network-on-chip design example and the resulting power-performance benefits are reported
Floorplan-Aware High Performance NoC Design
Las actuales arquitecturas de m�ltiples n�cleos como los chip multiprocesadores (CMP) y soluciones multiprocesador para sistemas dentro del chip (MPSoCs) han adoptado a las redes dentro del chip (NoC) como elemento -ptimo para la inter-conexi-n de los diversos elementos de dichos sistemas. En este sentido, fabricantes de CMPs y MPSoCs han adoptado NoCs sencillas, generalmente con una topolog'a en malla o anillo, ya que son suficientes para satisfacer las necesidades de los sistemas actuales. Sin embargo a medida que los requerimientos del sistema -- baja latencia y alto rendimiento -- se hacen m�s exigentes, estas redes tan simples dejan de ser una soluci-n real. As', la comunidad investigadora ha propuesto y analizado NoCs m�s complejas. No obstante, estas soluciones son m�s dif'ciles de implementar -- especialmente los enlaces largos -- haciendo que este tipo de topolog'as complejas sean demasiado costosas o incluso inviables.
En esta tesis, presentamos una metodolog'a de dise-o que minimiza la p�rdida de prestaciones de la red debido a su implementaci-n real. Los principales problemas que se encuentran al implementar una NoC son los conmutadores y los enlaces largos. En esta tesis, el conmutador se ha hecho modular, es decir, formado como uni-n de m-dulos m�s peque-os. En nuestro caso, los m-dulos son id�nticos, donde cada m-dulo es capaz de arbitrar, conmutar, y almacenar los mensajes que le llegan. Posteriormente, flexibilizamos la colocaci-n de estos m-dulos en el chip, permitiendo que m-dulos de un mismo conmutador est�n distribuidos por el chip.
Esta metodolog'a de dise-o la hemos aplicado a diferentes escenarios. Primeramente, hemos introducido nuestro conmutador modular en NoCs con topolog'as conocidas como la malla 2D. Los resultados muestran como la modularidad y la distribuci-n del conmutador reducen la latencia y el consumo de potencia de la red.
En segundo lugar, hemos utilizado nuestra metodolog'a de dise-o para implementar un crossbar distribuidRoca Pérez, A. (2012). Floorplan-Aware High Performance NoC Design [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17844Palanci
- …