Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks

[EN] This dissertation addresses the problem of multimedia delivery over multi-hop ad hoc wireless networks, and especially over wireless sensor networks. Due to their characteristics of low power consumption, low processing capacity and low memory capacity, they have major difficulties in achieving optimal quality levels demanded by end users in such communications. In the first part of this work, it has been carried out a study to determine the behavior of a variety of multimedia streams and how they are affected by the network conditions when they are transmitted over topologies formed by devices of different technologies in multi hop wireless ad hoc mode. To achieve this goal, we have performed experimental tests using a test bench, which combine the main codecs used in audio and video streaming over IP networks with different sound and video captures representing the characteristic patterns of multimedia services such as phone calls, video communications, IPTV and video on demand (VOD). With the information gathered in the laboratory, we have been able to establish the correlation between the induced changes in the physical and logical topology and the network parameters that measure the quality of service (QoS) of a multimedia transmission, such as latency, jitter or packet loss. At this stage of the investigation, a study was performed to determine the state of the art of the proposed protocols, algorithms, and practical implementations that have been explicitly developed to optimize the multimedia transmission over wireless ad hoc networks, especially in ad hoc networks using clusters of nodes distributed over a geographic area and wireless sensor networks. Next step of this research was the development of an algorithm focused on the logical organization of clusters formed by nodes capable of adapting to the circumstances of real-time traffic. The stated goal was to achieve the maximum utilization of the resources offered by the set of nodes that forms the network, allowing simultaneously sending reliably and efficiently all types of content through them, and mixing conventional IP data traffic with multimedia traffic with stringent QoS and QoE requirements. Using the information gathered in the previous phase, we have developed a network architecture that improves overall network performance and multimedia streaming. In parallel, it has been designed and programmed a communication protocol that allows implementing the proposal and testing its operation on real network infrastructures. In the last phase of this thesis we have focused our work on sending multimedia in wireless sensor networks (WSN). Based on the above results, we have adapted both the architecture and the communication protocol for this particular type of network, whose use has been growing hugely in recent years.[ES] Esta tesis doctoral aborda el problema de la distribución de contenidos multimedia a través de redes inalámbricas ad hoc multisalto, especialmente las redes inalámbricas de sensores que, debido a sus características de bajo consumo energético, baja capacidad de procesamiento y baja capacidad de memoria, plantean grandes dificultades para alcanzar los niveles de calidad óptimos que exigen los usuarios finales en dicho tipo de comunicaciones. En la primera parte de este trabajo se ha llevado a cabo un estudio para determinar el comportamiento de una gran variedad de flujos multimedia y como se ven afectados por las condiciones de la red cuando son transmitidos a través topologías formadas por dispositivos de diferentes tecnologías que se comunican en modo ad hoc multisalto inalámbrico. Para ello, se han realizado pruebas experimentales sobre una maqueta de laboratorio, combinando los principales códecs empleados en la transmisión de audio y video a través de redes IP con diversas capturas de sonido y video que representan patrones característicos de servicios multimedia tales como las llamadas telefónicas, videoconferencias, IPTV o video bajo demanda (VOD). Con la información reunida en el laboratorio se ha podido establecer la correlación entre los cambios inducidos en la topología física y lógica de la red con los parámetros que miden la calidad de servicio (QoS) de una transmisión multimedia, tales como la latencia el jitter o la pérdida de paquetes. En esta fase de la investigación se realiza un estudio para determinar el estado del arte de las propuestas de desarrollo e implementación de protocolos y algoritmos que se han generado de forma explícita para optimizar la transmisión de tráfico multimedia sobre redes ad hoc inalámbricas, especialmente en las redes inalámbricas de sensores y redes ad hoc utilizando clústeres de nodos distribuidos en un espacio geográfico. El siguiente paso en la investigación ha consistido en el desarrollo de un algoritmo propio para la organización lógica de clústeres formados por nodos capaces de adaptarse a las circunstancias del tráfico en tiempo real. El objetivo planteado es conseguir un aprovechamiento máximo de los recursos ofrecidos por el conjunto de nodos que forman la red, permitiendo de forma simultánea el envío de todo tipo de contenidos a través de ellos de forma confiable y eficiente, permitiendo la convivencia de tráfico de datos IP convencional con tráfico multimedia con requisitos exigentes de QoS y QoE. A partir de la información conseguida en la fase anterior, se ha desarrollado una arquitectura de red que mejora el rendimiento general de la red y el de las transmisiones multimedia de audio y video en particular. De forma paralela, se ha diseñado y programado un protocolo de comunicación que permite implementar el modelo y testear su funcionamiento sobre infraestructuras de red reales. En la última fase de esta tesis se ha dirigido la atención hacia la transmisión multimedia en las redes de sensores inalámbricos (WSN). Partiendo de los resultados anteriores, se ha adaptado tanto la arquitectura como el protocolo de comunicaciones para este tipo concreto de red, cuyo uso se ha extendido en los últimos años de forma considerable[CA] Esta tesi doctoral aborda el problema de la distribució de continguts multimèdia a través de xarxes sense fil ad hoc multi salt, especialment les xarxes sense fil de sensors que, a causa de les seues característiques de baix consum energètic, baixa capacitat de processament i baixa capacitat de memòria, plantegen grans dificultats per a aconseguir els nivells de qualitat òptims que exigixen els usuaris finals en eixos tipus de comunicacions. En la primera part d'este treball s'ha dut a terme un estudi per a determinar el comportament d'una gran varietat de fluxos multimèdia i com es veuen afectats per les condicions de la xarxa quan són transmesos a través topologies formades per dispositius de diferents tecnologies que es comuniquen en mode ad hoc multi salt sense fil. Per a això, s'han realitzat proves experimentals sobre una maqueta de laboratori, combinant els principals códecs empleats en la transmissió d'àudio i vídeo a través de xarxes IP amb diverses captures de so i vídeo que representen patrons característics de serveis multimèdia com son les cridades telefòniques, videoconferències, IPTV o vídeo baix demanda (VOD). Amb la informació reunida en el laboratori s'ha pogut establir la correlació entre els canvis induïts en la topologia física i lògica de la xarxa amb els paràmetres que mesuren la qualitat de servei (QoS) d'una transmissió multimèdia, com la latència el jitter o la pèrdua de paquets. En esta fase de la investigació es realitza un estudi per a determinar l'estat de l'art de les propostes de desenvolupament i implementació de protocols i algoritmes que s'han generat de forma explícita per a optimitzar la transmissió de tràfic multimèdia sobre xarxes ad hoc sense fil, especialment en les xarxes sense fil de sensors and xarxes ad hoc utilitzant clusters de nodes distribuïts en un espai geogràfic. El següent pas en la investigació ha consistit en el desenvolupament d'un algoritme propi per a l'organització lògica de clusters formats per nodes capaços d'adaptar-se a les circumstàncies del tràfic en temps real. L'objectiu plantejat és aconseguir un aprofitament màxim dels recursos oferits pel conjunt de nodes que formen la xarxa, permetent de forma simultània l'enviament de qualsevol tipus de continguts a través d'ells de forma confiable i eficient, permetent la convivència de tràfic de dades IP convencional amb tràfic multimèdia amb requisits exigents de QoS i QoE. A partir de la informació aconseguida en la fase anterior, s'ha desenvolupat una arquitectura de xarxa que millora el rendiment general de la xarxa i el de les transmissions multimèdia d'àudio i vídeo en particular. De forma paral¿lela, s'ha dissenyat i programat un protocol de comunicació que permet implementar el model i testejar el seu funcionament sobre infraestructures de xarxa reals. En l'última fase d'esta tesi s'ha dirigit l'atenció cap a la transmissió multimèdia en les xarxes de sensors sense fil (WSN). Partint dels resultats anteriors, s'ha adaptat tant l'arquitectura com el protocol de comunicacions per a aquest tipus concret de xarxa, l'ús del qual s'ha estés en els últims anys de forma considerable.Díaz Santos, JR. (2016). Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/62162TESI

A Logically Centralized Approach for Control and Management of Large Computer Networks

Management of large enterprise and Internet Service Provider networks is a complex, error-prone, and costly challenge. It is widely accepted that the key contributors to this complexity are the bundling of control and data forwarding in traditional routers and the use of fully distributed protocols for network control. To address these limitations, the networking research community has been pursuing the vision of simplifying the functional role of a router to its primary task of packet forwarding. This enables centralizing network control at a decision plane where network-wide state can be maintained, and network control can be centrally and consistently enforced. However, scalability and fault-tolerance concerns with physical centralization motivate the need for a more flexible and customizable approach. This dissertation is an attempt at bridging the gap between the extremes of distribution and centralization of network control. We present a logically centralized approach for the design of network decision plane that can be realized by using a set of physically distributed controllers in a network. This approach is aimed at giving network designers the ability to customize the level of control and management centralization according to the scalability, fault-tolerance, and responsiveness requirements of their networks. Our thesis is that logical centralization provides a robust, reliable, and efficient paradigm for management of large networks and we present several contributions to prove this thesis. For network planning, we describe techniques for optimizing the placement of network controllers and provide guidance on the physical design of logically centralized networks. For network operation, algorithms for maintaining dynamic associations between the decision plane and network devices are presented, along with a protocol that allows a set of network controllers to coordinate their decisions, and present a unified interface to the managed network devices. Furthermore, we study the trade-offs in decision plane application design and provide guidance on application state and logic distribution. Finally, we present results of extensive numerical and simulative analysis of the feasibility and performance of our approach. The results show that logical centralization can provide better scalability and fault-tolerance while maintaining performance similarity with traditional distributed approach

Deliverable DJRA1.2. Solutions and protocols proposal for the network control, management and monitoring in a virtualized network context

This deliverable presents several research proposals for the FEDERICA network, in different subjects, such as monitoring, routing, signalling, resource discovery, and isolation. For each topic one or more possible solutions are elaborated, explaining the background, functioning and the implications of the proposed solutions.This deliverable goes further on the research aspects within FEDERICA. First of all the architecture of the control plane for the FEDERICA infrastructure will be defined. Several possibilities could be implemented, using the basic FEDERICA infrastructure as a starting point. The focus on this document is the intra-domain aspects of the control plane and their properties. Also some inter-domain aspects are addressed. The main objective of this deliverable is to lay great stress on creating and implementing the prototype/tool for the FEDERICA slice-oriented control system using the appropriate framework. This deliverable goes deeply into the definition of the containers between entities and their syntax, preparing this tool for the future implementation of any kind of algorithm related to the control plane, for both to apply UPB policies or to configure it by hand. We opt for an open solution despite the real time limitations that we could have (for instance, opening web services connexions or applying fast recovering mechanisms). The application being developed is the central element in the control plane, and additional features must be added to this application. This control plane, from the functionality point of view, is composed by several procedures that provide a reliable application and that include some mechanisms or algorithms to be able to discover and assign resources to the user. To achieve this, several topics must be researched in order to propose new protocols for the virtual infrastructure. The topics and necessary features covered in this document include resource discovery, resource allocation, signalling, routing, isolation and monitoring. All these topics must be researched in order to find a good solution for the FEDERICA network. Some of these algorithms have started to be analyzed and will be expanded in the next deliverable. Current standardization and existing solutions have been investigated in order to find a good solution for FEDERICA. Resource discovery is an important issue within the FEDERICA network, as manual resource discovery is no option, due to scalability requirement. Furthermore, no standardization exists, so knowledge must be obtained from related work. Ideally, the proposed solutions for these topics should not only be adequate specifically for this infrastructure, but could also be applied to other virtualized networks.Postprint (published version

A study into scalable transport networks for IoT deployment

The growth of the internet towards the Internet of Things (IoT) has impacted the way we live. Intelligent (smart) devices which can act autonomously has resulted in new applications for example industrial automation, smart healthcare systems, autonomous transportation to name just a few. These applications have dramatically improved the way we live as citizens. While the internet is continuing to grow at an unprecedented rate, this has also been coupled with the growing demands for new services e.g. machine-to machine (M2M) communications, smart metering etc. Transmission Control Protocol/Internet Protocol (TCP/IP) architecture was developed decades ago and was not prepared nor designed to meet these exponential demands. This has led to the complexity of the internet coupled with its inflexible and a rigid state. The challenges of reliability, scalability, interoperability, inflexibility and vendor lock-in amongst the many challenges still remain a concern over the existing (traditional) networks. In this study, an evolutionary approach into implementing a "Scalable IoT Data Transmission Network" (S-IoT-N) is proposed while leveraging on existing transport networks. Most Importantly, the proposed evolutionary approach attempts to address the above challenges by using open (existing) standards and by leveraging on the (traditional/existing) transport networks. The Proof-of-Concept (PoC) of the proposed S-IoT-N is attempted on a physical network testbed and is demonstrated along with basic network connectivity services over it. Finally, the results are validated by an experimental performance evaluation of the PoC physical network testbed along with the recommendations for improvement and future work

Mobile Ad Hoc Networks

Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, Mobile Ad hoc Networks: Current Status and Future Trends identifies and examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Containing the contributions of leading researchers, industry professionals, and academics, this forward-looking reference provides an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service. Also suitable as a text for graduate students, the book is organized into three sections: Fundamentals of MANET Modeling and Simulation—Describes how MANETs operate and perform through simulations and models Communication Protocols of MANETs—Presents cutting-edge research on key issues, including MAC layer issues and routing in high mobility Future Networks Inspired By MANETs—Tackles open research issues and emerging trends Illustrating the role MANETs are likely to play in future networks, this book supplies the foundation and insight you will need to make your own contributions to the field. It includes coverage of routing protocols, modeling and simulations tools, intelligent optimization techniques to multicriteria routing, security issues in FHAMIPv6, connecting moving smart objects to the Internet, underwater sensor networks, wireless mesh network architecture and protocols, adaptive routing provision using Bayesian inference, and adaptive flow control in transport layer using genetic algorithms

Introduction to IP multicast in production networks

The objective of this paper is to introduce the reader to the world of IP multicasting. I intend to achieve this goal by providing an introduction that bridges the gap between the existing unicast networks and the developing multicast network. The basics of multicast that is covered in the earlier chapter includes the multicast addressing scheme, different protocols used for multicast transmission, various distribution trees that are formed by these protocols and various aspects of multicast forwarding. We take a look at IGMP which is the protocol that runs between the host devices and their first hop multicast routers, enabling the host to join/leave a multicast group. The protocols used for running IP multicast over networks are discussed in detail with additional emphasis on PIM-SM which is the most common among the available selection. The paper concludes with a general overlook on the avenues where multicasting could play a major role benefitting the Internet Service Providers and eve large corporate networks, and a glance on the pros and cons of multicasting

The Z-Wave Routing Protocol and Its Security Implications

Z-Wave is a proprietary technology used to integrate sensors and actuators over RF and perform smart home and office automation services. Lacking implementation details, consumers are under-informed on the security aptitude of their installed distributed sensing and actuating systems. While the Physical (PHY) and Medium Access Control (MAC) layers of the protocol have been made public, details regarding the network layer are not available for analysis. Using a real-world Z-Wave network, the frame forwarding and topology management aspects of the Z-Wave routing protocol are reverse engineered. A security analysis is also performed on the network under study to identify source and data integrity vulnerabilities of the routing protocol. It is discovered that the topology and routes may be modified by an outsider through the exploitation of the blind trust inherent to the routing nodes of the network. A Black Hole attack is conducted on a real-world Z-Wave network to demonstrate a well-known routing attack that exploits the exposed vulnerabilities. As a result of the discoveries, several recommendations are made to enhance the security of the routing protocol

Mobile Ad Hoc Networks

Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, Mobile Ad hoc Networks: Current Status and Future Trends identifies and examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Containing the contributions of leading researchers, industry professionals, and academics, this forward-looking reference provides an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service. Also suitable as a text for graduate students, the book is organized into three sections: Fundamentals of MANET Modeling and Simulation—Describes how MANETs operate and perform through simulations and models Communication Protocols of MANETs—Presents cutting-edge research on key issues, including MAC layer issues and routing in high mobility Future Networks Inspired By MANETs—Tackles open research issues and emerging trends Illustrating the role MANETs are likely to play in future networks, this book supplies the foundation and insight you will need to make your own contributions to the field. It includes coverage of routing protocols, modeling and simulations tools, intelligent optimization techniques to multicriteria routing, security issues in FHAMIPv6, connecting moving smart objects to the Internet, underwater sensor networks, wireless mesh network architecture and protocols, adaptive routing provision using Bayesian inference, and adaptive flow control in transport layer using genetic algorithms